Skip to content
GullySales

Tool and die manufacturers · WhatsApp marketing

Use WhatsApp to take drawings, send quotes and report try-out progress to the buyer.

WhatsApp for a tool room is where a stamping unit owner sends a part photo, asks for a rate and later receives try-out pictures. GullySales sets up the business number, the message templates and the saved replies so each chat becomes a record.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What WhatsApp marketing means

WhatsApp marketing is sending updates, offers and reminders to customers on the app most Indian buyers already check daily. GullySales sets up business WhatsApp, writes the message templates and keeps the list consented and current.

Last updated 14 Nov 2026.

For tool and die manufacturers

Where it usually goes wrong, and what we would do.

  • “Drawings arrive as photos”

    An owner on the shop floor sends a phone picture of a drawing or part. Without a standard reply asking for the file, material and quantity, the chat drifts and the quote waits.

  • “Try-out updates suit the format”

    A photograph of the first sample and a short note answers the buyer's biggest worry at once. The same update by email may sit unread.

  • “Chats are lost when the phone changes”

    Quotes agreed in a personal chat vanish with a handset. A business account with a shared number and a log keeps the history with the shop.

  • “Group chats with customer engineers get crowded”

    A group with the buyer's tooling team helps during try-out and also buries decisions. Summarise agreed points in writing after each session.

What we do

What we deliver for tool and die manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A WhatsApp Business setup

    A business profile with name, address, tool types and a catalogue of the dies you build.

    Result: A buyer meets a professional profile when they message.

  2. Saved replies for drawing intake

    Ready messages that ask for the drawing, material, thickness, quantity and press available.

    Result: Each chat gathers what the quote needs.

  3. Try-out update templates

    A short format for sharing sample pictures, measurements and next steps.

    Result: Buyers get consistent updates.

  4. Chat-to-record routine

    A rule that every quote or approval in a chat is copied to the register the same day.

    Result: No decision lives only in a chat.

  5. A broadcast list for tool owners

    A consented list of owners who agreed to hear from you about maintenance and new capacity, with an easy way to leave.

    Result: Only people who agreed receive the message.

How the result is measured

  • Messages delivered
  • Reply rate
  • Enquiries from WhatsApp

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The messages a tool room sends and keeps on WhatsApp.

Drawing or part photograph from a buyer
Saved to the enquiry record at once, with a note asking for the revision, material and thickness. A photograph alone is only a start.
Request for missing detail
A saved reply listing tolerances, press and volume the estimator still needs. The estimator edits it so it reads as a person's message.
Try-out time and place
A message to the buyer's tooling head with the press and the time the tool will be tried. It is for those who need to be there.
First strip photograph
A photograph of the first strip sent for the buyer's comment, with the buyer's remark saved to the tool record.
Opt-in note for tool owners
A message about regrind and repair sent only to owners who asked for it, with a line for stopping messages. Check the platform's current rules.

Who it is for

This is written for these tool and die manufacturers.

  • Progressive die makers for brackets, clips and terminals
  • Draw and form die makers for deep drawn covers and housings
  • Blanking and piercing tool makers for laminations
  • Auto press tool rooms supplying Tier-1 and Tier-2 stampers
  • Appliance and white goods tool rooms
  • Jig, fixture and gauge makers within a general tool room
  • Tool rooms offering die maintenance and repair
  • Tool rooms with their own press line for try-outs and small lots

Before you decide

When this may not be the right fit.

  • The business number is a personal phone shared by several people, and a chat could be read by the wrong person.
  • Your buyers keep to email and a formal portal, and a chat would be ignored.

Before you decide

Agree the work. Know how to judge it.

WhatsApp marketing for tool and die manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Describe how the contact list was collected, what people asked to receive, and which messages are currently sent. Include opt-outs and replies when reviewing campaign performance.

Make the scope clear

Agree the audience, message purpose, sending system, and response owner. Separate promotional communication from order or service updates, and check current platform requirements before launch.

Check the work in use

Test the message with a small appropriate audience before wider use. Check links, reply handling, opt-outs, and whether the response leads to a relevant conversation or order.

Know when to change course

Do not use an unexplained contact list as a shortcut to demand. If recipients do not expect the message, resolve the permission and relevance questions before sending.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from tool and die manufacturers. Anything missing is noted in the written scope, with who will supply it.

A SIM and handset the tool room owns
The business number must belong to the tool room, not to the estimator's own mobile. If the estimator leaves, the chats stay. Without this, the history leaves with the person. Mark which of these the estimator opens without trouble, since some CAD files arrive as images.
Agreed file formats for drawings
Tell us which formats you can open, such as PDF, DXF or STEP, and which you cannot. The saved reply states them. Without a stated list, buyers send photographs of paper drawings, which cannot be quoted. Note any customer whose engineers insist on their own channel, so we do not push them to ours.
A list of customer engineers' numbers
Numbers of the customer engineers who agreed to be contacted on WhatsApp, with their names and plants. Without a basis for contact, a number stays off the broadcast list. Where your design software cannot read a format, say so now, so the saved reply does not invite a file you cannot open.
Rules on group chats
Decide whether you join the customer's engineering group, who inside the tool room speaks in it and what is not shared. Without a rule, a crowded group becomes the only record and the chat loses the thread. A name of a customer engineer who agreed is enough, with the plant and the part type.
A person who checks the chat each morning
One person must read the business chat at the start of the working day and respond or pass it on. An enquiry that waits a day goes to another shop. If a customer insists on a particular group, we adjust the rule for that group alone.

How it works

How the whatsapp marketing work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Look at the phone the drawings arrive on

    We ask whoever receives enquiries to show us the chats: photographs of parts, scribbled sketches, voice notes and screenshots of drawings. You tell us which phone holds them. We leave knowing what arrives, who receives it and what disappears when a phone is changed. We also ask which of them stayed on one phone and which were forwarded around the plant, since that shows how widely a drawing circulated.

  2. 2

    Set up the shop's business number

    A WhatsApp Business account is created on a number the tool room owns, with a clear name, address, hours and a link to the drawing intake sheet. The owner decides who may log in. Staff move enquiry chats across from personal phones. The log-in is kept by the owner, and a second person holds a recovery route, so a lost phone does not lock the shop out of its own enquiries.

  3. 3

    Write saved replies for drawing intake

    We write replies for the questions that come first: send the drawing in a stated format, give the volume, material and press, and tell us the launch date. The estimator edits them. A buyer receives the same precise request every time. Replies that mention a quote are linked to the reference in the register, so a chat can be matched to the quote it concerns.

  4. 4

    Prepare try-out update templates

    When a tool is tried out, a message with photographs and a short note goes to the customer's engineer. We write the template and the order of items. The tool room head decides which measurements may be shared. We include an order for the photographs, such as the first strip, the full part and the gauge check, so every update reads the same.

  5. 5

    Make each chat a record

    A routine at the end of each enquiry copies the chat's key facts into the register: drawing reference, quoted figure, promises made. The office manager owns it. A chat without a record is treated as not having happened. The record notes the date of any promise given in the chat, so a lead time said on a phone is found again when the buyer recalls it.

  6. 6

    Read chats against quotes and orders

    We compare the chats handled, the quotes issued from them and the orders that followed, with the register from before. You decide which saved replies to keep, which groups to close and whether broadcasts to tool owners earned a place. Groups that brought no quote are closed, and the broadcast list is trimmed to owners who answered.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need the WhatsApp Business API?
Not at first. The Business app handles templates and a catalogue. Read the platform's latest rules before you send to a bulk list.
Can we send quotes on WhatsApp?
Yes, as a file with a short note, and confirm it by email if the buyer's process requires it. Record the quote in the register.
How do we avoid mixing personal and business chats?
Use a separate number and device for the tool room, with named people who may reply.
Should a quote travel on WhatsApp or by email?
Send the formal quote by email so it has a record, and use WhatsApp to tell the buyer it has gone. Purchase teams file email against a tool order, and a quote in a chat may not be accepted into their approval.
Should a quote travel by WhatsApp or by email?
Send the quote as a document by email, and use WhatsApp to tell the buyer it has been sent and to answer questions about it. A quote carries terms, a lead time and a validity, and email gives the buyer's purchase department a filed copy. WhatsApp is faster for the conversation around it. We set both up so each chat points to the emailed quote and the register records both.
Is the ordinary Business app enough for a tool room?
Not for a tool room of this size. The Business app handles saved replies, labels and a catalogue for a few people, and broadcasts to a modest list of tool owners. The API suits a large team that wants automated flows and a shared inbox, and it costs more to set up. We start with the app and revisit only if the volume of enquiries outgrows it. Look at the platform's present messaging rules for businesses.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.