Skip to content
GullySales

Tool and die manufacturers · Search engine optimisation

Appear when a press shop searches for the exact die its next part needs.

SEO for a tool room means that the pages describing progressive dies, draw dies and press tools match the words a stamping unit owner types when a new part arrives. GullySales works on page structure, tool-type wording and the pages that answer a purchase engineer's questions.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What search engine optimisation means

Search engine optimisation (SEO) is the work of getting your website to appear when a buyer searches Google for what you sell. GullySales builds pages around real search terms, fixes technical issues that block ranking, and tracks which searches actually bring enquiries.

Last updated 14 Nov 2026.

For tool and die manufacturers

Where it usually goes wrong, and what we would do.

  • “Buyers search by die type and part”

    Phrases such as progressive die for brackets or blanking tool for laminations carry intent. One page called press tools and dies cannot rank for all of them. Each tool type needs its own page naming the part it makes.

  • “Tonnage and steel are search terms too”

    A tooling head checks whether a tool suits a press of a given tonnage and which steel is used for punches and die blocks. Pages that state these answer the question a generic brochure leaves open.

  • “Regional phrases bring nearby shops”

    A stamping unit in Pune or Faridabad wants a tool room near enough for try-out visits. Naming the industrial belts you serve on the relevant pages helps those buyers recognise a fit.

  • “Repair searches are separate”

    An owner whose die has a broken punch types die repair, not progressive die. A repair page with its own wording brings a different buyer, who later buys a new tool.

What we do

What we deliver for tool and die manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Keyword map by tool type

    A sheet that pairs each die type and part family with the words a buyer uses, so each page has one clear target.

    Result: Every page has a stated search purpose.

  2. Rewritten tool pages

    Pages for each tool type with part sizes, press tonnage, steel, hardening and try-out facility, written in plain engineering terms.

    Result: A page can be read by a purchase engineer without a call.

  3. Gallery with descriptive names

    Photographs and design views carry file names and captions that state the tool type and the part.

    Result: Images describe themselves to search engines and to buyers.

  4. Technical structure fixes

    Titles, headings, internal links between tool pages and the maintenance page, and a sitemap checked for gaps.

    Result: Each tool page links to the next logical page.

  5. A repair and maintenance page

    A page for die sharpening, spare punches and repair of cracked die blocks, using the words an owner types when a tool fails.

    Result: Repair searches arrive at a page built for them.

How the result is measured

  • Ranking positions
  • Organic traffic
  • Enquiries from organic search

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

What a stamping unit types for its next tool, and the page that answers it.

progressive die manufacturer
A page for progressive dies showing strip layouts, parts made and the presses they run on. Photographs of finished dies with a strip beside them prove the work.
deep draw die for steel housing
A draw die page naming the depth-to-diameter ratios you have handled, the steels formed and the lubrication notes, written for the tooling head.
blanking and piercing tool for laminations
A page for lamination dies stating thickness ranges, the stack the die cuts and the tolerance held on the slot.
press tool repair and sharpening
A maintenance page for tool owners with a dull or broken die. List what you repair, the steels you regrind and how to send a tool in.
die maker near Peenya or Pune
A regional page naming the industrial area, the stamping units you reach and the pickup route for a tool. Use a place you really serve.

Who it is for

This is written for these tool and die manufacturers.

  • Progressive die makers for brackets, clips and terminals
  • Draw and form die makers for deep drawn covers and housings
  • Blanking and piercing tool makers for laminations
  • Auto press tool rooms supplying Tier-1 and Tier-2 stampers
  • Appliance and white goods tool rooms
  • Jig, fixture and gauge makers within a general tool room
  • Tool rooms offering die maintenance and repair
  • Tool rooms with their own press line for try-outs and small lots

Before you decide

When this may not be the right fit.

  • Your finished tools sit under customer secrecy and you cannot show any, so a page would have only words.
  • You supply one auto supplier under a long agreement and take no outside tool work, so a search page would bring enquiries you will not quote.

Before you decide

Agree the work. Know how to judge it.

SEO for tool and die manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring the pages for the products or services you want to sell, the search queries available in your reports, and examples of enquiries from search. Separate branded searches from buyers discovering you for the first time.

Make the scope clear

Agree which pages and technical fixes come first, who can publish changes, and who supplies subject knowledge. Link search work to a relevant enquiry route on each priority page.

Check the work in use

Follow the trail from a relevant query to its landing page and then to an enquiry. Review whether those enquiries fit your offer, alongside indexing and search visibility.

Know when to change course

A ranking movement alone is not a buying signal. If traffic grows but relevant enquiries do not, revisit page intent and the offer before producing more pages.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from tool and die manufacturers. Anything missing is noted in the written scope, with who will supply it.

A complete list of tool types you build
Write down every kind of tool the shop can build and every kind it has built, including jigs, fixtures and gauges. The owner can forget the smaller work. Anything missing from the list has no page and cannot be found in search at all.
Technical details you may state
Tell us which steel grades, hardness ranges, press tonnages and software you are willing to name publicly. Some tool rooms keep these private. We write only what you approve, and where you decline, pages stay general and weaker as a result.
Photographs of dies and try-outs
Pictures taken on the bench and at the try-out press, with a note of the tool type, give each page its proof. Clean phone photographs are acceptable. Without them, pages carry only text, and a tooling head distrusts a tool room that shows no work.
Login to the website and its hosting
We need the content editor and hosting access, or the contact who holds them. If the site was built by a former vendor, recover the login first. Without access, we can recommend changes but cannot publish or correct anything.
Your position on part drawings online
Decide whether any drawing may appear on the site, in what form and who approves it. Customers expect privacy. We write the pages around your answer, and absent one we show only tool photographs.

How it works

How the search engine optimisation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sort past tools by die type and part

    We list the dies and press tools you have built, grouped by the way a buyer describes them: progressive die for terminals, draw die for covers, blanking tool for laminations. Say which die types you want to make more of. The sorted list becomes the map of pages the site needs, and it shows which types currently have no page at all.

  2. 2

    Search as a stamping unit owner would

    We type the phrases a unit owner or tooling head would use for a new part, including tonnage, steel grade and the name of your city or industrial area, and record who appears on the first page. You see which competitors, directories and marketplaces hold the places you want and which phrases nobody serves well.

  3. 3

    Rewrite each tool page with your engineers

    A design engineer or the tool room head reads each draft against the real work: what the tool does, the steel and hardening used, the press for try-out and the sort of part it suits. We keep their wording where it is clear and replace brochure phrases. No page goes live until an engineer says it is correct.

  4. 4

    Name the gallery photographs for what they show

    The images of dies, strip layouts and try-out parts are renamed and captioned by tool type and stage, so a search engine and a buyer both know what they show. You mark any photograph that reveals a customer's part and we crop or leave it out. The gallery then supports the pages instead of sitting apart from them.

  5. 5

    Fix the faults that hide the pages

    Your web contact gives us access so we can check speed on a phone, broken links, drawing files that cannot be read by search and pages that repeat each other. We hand over a plain list of faults with the person who fixes each. The repair and maintenance page is added last, as a separate search from a new tool.

  6. 6

    Read positions beside enquiries received

    We compare the positions for each tool type with the list recorded before any page changed, and set them beside the drawings and calls the register logged. You decide which types deserve a second page, which phrases have not moved and whether a regional phrase is bringing only small shops.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Will a page rank if we copy a competitor's wording?
Copied wording gives the page no reason to rank. Describe your own tools, presses and steel. Specific detail is what a purchase engineer reads, and rankings are never promised by anyone.
Do we need a blog on a tool room site?
One or two plain explanations, such as how a strip layout is planned, help buyers who are unsure what to ask. Keep them tied to tool pages instead of writing on every press topic.
Should part drawings appear on the site?
Only with the owner's agreement. Where a drawing cannot appear, show the part and a design view without the customer's name or print details.
Do we mention the steel grades we use for dies?
Yes, in general terms such as tool steel for the die and hardened inserts for wear points. Tooling heads search by steel and hardness. Do not publish a customer's specification or a grade a customer has told you to keep private.
Why does a repair page matter if we want new tool orders?
A buyer who needs a punch re-ground or a die reworked searches differently from a buyer with a new part, and the first can become the second. A repair and maintenance page catches those searches and shows the work to a stamping unit that does not yet know you. It also reassures a new-tool buyer that the tool room will still be there after handover, which is a worry they voice at the quote stage.
Can one page cover progressive dies and draw dies together?
It is better not to. A progressive die for brackets and a draw die for covers are chosen for different parts, by buyers with different questions, and a combined page answers neither well. Each type gets its own page with its own example, and a short overview page links to them. If you have built only one or two of a type, we write a shorter page and strengthen it when more work is completed.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.