Skip to content
GullySales

Valve manufacturers · Follow up systems

Chase every valve quotation until the buyer says yes, says no or says why not.

A follow-up system for a valve maker is a set routine for calling, writing and reminding after a quotation goes out, with an owner for each step. GullySales works on the routine, the message wording and the log that proves it was done.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

An industrial supplier checks gears, bearings, valves and fasteners

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For valve manufacturers

Where it usually goes wrong, and what we would do.

  • “The quote goes out and silence follows”

    Purchase teams collect quotes from several makers and compare them later. A maker who sends the offer and waits is forgotten, while one who asks a useful question after the buyer has read the offer stays in the comparison.

  • “A chase that only asks 'any update' wastes the call”

    A useful follow-up carries something new: a revised delivery date, a test certificate sample, an alternative material. A call that adds nothing teaches the buyer to ignore the next one.

  • “Project orders move slowly and then suddenly”

    An EPC order may wait on a client approval for a long stretch and then need valves at once. A maker who kept in touch with the right person during the quiet period is the one called when the approval comes.

  • “Trader reorders lapse unnoticed”

    A trader who ordered a batch and then stopped may have moved to another brand. Without a record of the last order date, nobody asks, and the account fades without a conversation.

What we do

What we deliver for valve manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Follow-up routine by order type

    A defined sequence for project RFQs, plant repairs and trader sales, with who calls, who writes and what each message carries.

    Result: Each quotation has a next step and a named owner.

  2. Message templates

    Short email and WhatsApp wording for after the quote, after a revision, after a lost order and for a dormant buyer.

    Result: The team sends clear messages instead of improvising.

  3. Reminder set-up

    Reminders in your CRM or a shared sheet tied to quote dates and buyer decision points.

    Result: No open quotation goes without a due date for its next contact.

  4. Lost-order conversation

    A short script and log entry for asking why an order went elsewhere, and keeping the door open.

    Result: Reasons for losing are recorded in the buyer's words.

  5. Dormant account list

    A list of buyers with no order for a set period you choose, with a plan for each.

    Result: Lapsed buyers are contacted on purpose, not by chance.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Note these at each moment after a valve quotation goes out.

Quotation sent
Record the date, the lines quoted and the validity. The reminder is set to the buyer's own bid closing date, not a general interval.
Technical query from the buyer
Log the question on a material, rating or drawing and who answered it. An unanswered technical query is the commonest reason a quote stalls.
Price negotiation round
Record which lines moved and the reason given, so the next revision does not reopen a point already settled.
Order placed or lost
Mark the outcome per line with the reason. A lost line with a stated reason becomes a short conversation instead of silence.
Reorder due on trader account
Note the last order date and usual sizes, so a call to a trader lands when stock is likely to be thinning.

Who it is for

This is written for these valve manufacturers.

  • Industrial gate, globe and check valve makers
  • Ball and butterfly valve makers for process lines
  • Cast steel and stainless steel valve foundries
  • Bronze and brass valve makers for building services
  • Control valve and actuated valve assemblers
  • Safety relief valve makers
  • Valve makers focused on water, irrigation and municipal lines
  • Oil, gas and chemical plant valve specialists
  • Valve refurbishment and testing firms that also manufacture

Before you decide

When this may not be the right fit.

  • No one is named to own follow-ups, so reminders would be created and then ignored by the whole team.
  • Your quotes carry no validity date or bid closing date, so there is nothing to time a reminder against.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for valve manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from valve manufacturers. Anything missing is noted in the written scope, with who will supply it.

The quotation register for the last year
A list of quotes with buyer, date, value band and result. A spreadsheet is enough. If it does not exist, we reconstruct it from sent mail with your sales head, and the baseline is less exact.
Your trader and dealer list
Names, contacts and the valves they buy, with the last order date. Trader reorders lapse unnoticed, and this list is how we find them. Without dates, we cannot tell a dormant trader from an active one.
A named owner for each quote
The person responsible for the next call on every open quote. A shared inbox owned by nobody breaks the routine. If an owner is missing, we assign the sales head temporarily.
Your rule for revising a quote
A note of who may reopen a price or change a delivery promise after the buyer's query. Follow-up turns into negotiation, and the team should know its limits. If no rule exists, calls stay informational.
Call recordings or notes, if kept
Past call notes that show how a chase sounded. They let us write better questions. If none exist, we work from your engineers' accounts only.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Pull the list of quotes sent and silent

    We start with your register of quotations sent over the past year and mark which received no reply, which were lost and which became orders. Your sales head adds what they remember about each silence. You tell us who made the chasing calls then, and whether any call was made at all. This is the baseline against which any new routine is judged, and it is also the honest record of how many quotes went quiet without anyone noticing.

  2. 2

    Sort buyers into project, plant and trader

    A project buyer, a plant purchase team and a trader reorder behave differently after a quote, so they cannot share one routine. We group your sent quotes by these three and note the gap that each leaves before a reply. You tell us which of the three groups you want chased first.

  3. 3

    Write the questions a call should ask

    In place of asking for an update, each call asks something specific: whether the technical clarification was received, whether the vendor approval is complete, whether a competing offer needs a revised delivery. We write them with your sales engineers and read them aloud together. You cut any that sound pushy, and you add the one question a buyer in that group always raises, for instance whether the third-party inspection has been agreed.

  4. 4

    Draft the messages with the sales engineers

    We write the short emails and chat messages for each stage, using your own tone and naming the valve lines. Your engineers edit them until they would send them unchanged. You decide which messages may go out under the company name and which only under a person's.

  5. 5

    Test the reminders on live quotes

    We load a few open quotations into the reminder tool or the CRM and let the team work from it. You tell us when a reminder arrives at an awkward moment or points to the wrong owner. The routine is corrected on those notes before it is applied to every open quote, and the owner of each reminder is shown by name so that nothing sits unclaimed in a shared tray.

  6. 6

    Review lapsed and revived buyers

    After the routine has run, we compare the register with the starting list: quotes answered, lost reasons written, trader accounts reopened. Your sales head tells us what the team would change, such as a message that read too stiffly for a trader or a reminder that came before the buyer could have replied. We adjust the wording and owners, and record what stays. No rise in orders is promised.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How often should we follow up?
That depends on the buyer and the project, so set it with your sales head. Ask the buyer at the time of quoting when they expect to decide, and place the next contact around that date.
Is chasing a quote annoying to buyers?
Not when each contact adds something useful. A buyer who has a clear technical or delivery point to consider welcomes it. A bare reminder with nothing new is what irritates.
Who should own the follow-up?
The person who knows the buyer and the offer, normally the sales engineer, with a manager reading the open list. Shared ownership with no name attached is how quotations get dropped.
What do we do when a project buyer goes quiet for a long stretch?
Ask what the project stage is and when the valve order is expected to release. Project orders wait on approvals upstream, so a reminder tied to the next milestone beats repeated price calls and keeps the relationship open.
How should we handle a buyer who says they are still evaluating?
Ask what the evaluation is waiting for, and offer something that moves it: a datasheet, a reference visit, a test certificate or a revised delivery date. Write the answer on the quote record with the date. A buyer who is still evaluating is not a lost order, and the next contact should be set around the step they named. Do not push for a decision; give them a reason to reply.
Can follow-up be handled by a junior coordinator?
Yes, for acknowledgements, document requests and status checks, provided a script and a hand-over rule exist. Price discussions, technical changes and any promise about delivery stay with the sales engineer or the sales head. We write that line into the routine so the coordinator knows when to pass the call on, and the buyer never hears two different answers from the same company.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.