Welding fabrication companies · Lead generation
Bring in drawings and site visits for the jobs your shop is equipped to weld.
Lead generation for a fabrication shop means getting drawings, scopes and site-visit requests from buyers whose work matches your welders, bays and cranes. GullySales works on the pages, outreach and enquiry handling that bring those buyers to you instead of rate-only callers.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Also for welding fabrication companies
- CRM for welding fabrication companies
- Follow-up systems for welding fabrication companies
- SEO for welding fabrication companies
- Local SEO for welding fabrication shops
- Social media marketing for welding fabrication companies
- Content marketing for welding fabrication companies
- Buyer personas for welding fabrication companies
- WhatsApp marketing for welding fabrication companies
Sales and marketing for welding fabrication companies, the overview.
Plan the next part of the work
Last updated 21 Nov 2026.
For welding fabrication companies
Where it usually goes wrong, and what we would do.
“A rate-per-kilogram call is not a lead until a drawing arrives”
A caller who asks only for a rate has told you nothing about material, thickness, weld type or quantity. Treat that call as a prompt for questions. The lead is born when a drawing, a sketch or a site address reaches the estimator.
“Plants and contractors come from different doors”
A maintenance head with a leaking tank searches Google and rings. An EPC purchase team invites bids from names it already holds. One shop needs search pages for the first buyer and direct outreach with a document pack for the second.
“Capacity decides which enquiry is worth chasing”
A shop with a free stainless bay and idle TIG welders wants tank and vessel work this month, not heavy structural. Lead generation aimed at the job type with open capacity fills the floor you already pay for.
“A single contractor is a risk, not a pipeline”
When most orders flow through one or two contractors, they set the rate. Plant customers reached directly give the shop a second price reference and a way out of that squeeze.
What we do
What we deliver for welding fabrication companies.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Job-type enquiry pages
One page each for structural work, stainless tanks, pipe spools, machine frames and shutdown fabrication, each ending in a way to send a drawing.
Result: Every page has a clear route to send a drawing or request a site visit.
Drawing-first enquiry form
A short form that asks for drawing upload, material, quantity and site location, so the estimator starts with facts.
Result: Estimators receive material, quantity and location with every enquiry.
Target plant and contractor list
A researched list of plants and contractors within reach of your shop, sorted by the job types they buy.
Result: A named list of buyers, each tagged with the job type they are likely to need.
Marketplace enquiry sorting
A rule for IndiaMART and JustDial calls: who gets a drawing request, who gets a rate range and who is closed politely.
Result: The team knows which marketplace callers deserve an estimator's time.
Capacity-matched outreach
Messages to buyers for whichever job type your floor can take now, sent when the bay is free.
Result: Outreach follows the open capacity on your floor.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
Capture these on every drawing enquiry, and send this back.
- Drawing, sketch or site photo
- A file or picture attached to the enquiry. Without it the estimator cannot price, so ask for it in the first reply and log whether it arrived.
- Material and grade
- Mild steel, stainless 304 or 316, or aluminium. Grade changes the welding process and the filler, so the quote depends on it.
- Thickness and quantity
- A single bracket and a hundred frames are different jobs. Record both so the estimator can see whether the bay and welders are free.
- Inspection or test needed
- Dye penetrant, radiography, hydro test or none. It adds time and cost and tells you whether a third-party inspector will be called.
- Buyer type
- Plant maintenance, contractor, OEM or a kitchen builder. It decides which document pack goes out with the quote.
- Site visit date offered
- Log the day proposed. It separates a buyer who wants a visit from a price-check caller who never booked one.
Who it is for
This is written for these welding fabrication companies.
- Structural steel and platform fabricators
- Stainless steel tank and vessel fabricators for food, dairy and pharma
- Pipe spool and piping fabrication shops
- Machine frame and base fabricators for OEMs
- Heavy fabrication for cement, steel and power plants
- Aluminium and stainless welding for kitchens and architectural work
- Maintenance and shutdown fabrication contractors
- Trailer, tipper and truck body builders
Before you decide
When this may not be the right fit.
- Your estimator is away on site most of the week, so more drawings would only wait in the inbox.
- You have not listed the materials and thicknesses your shop will weld, so each enquiry would need the owner to decide.
- Your bays are full for the next job cycle and you cannot start new work, so enquiries would be lost to delay.
Before you decide
Agree the work. Know how to judge it.
Lead generation for welding fabrication companies: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from welding fabrication companies. Anything missing is noted in the written scope, with who will supply it.
- The enquiry register for the last season
- A notebook, a spreadsheet or a pile of visiting cards is acceptable, as long as dates and outcomes are readable. We need it to tell drawing-led enquiries from rate-only calls. Without it, the plan has no starting figure and the later comparison has nothing honest to measure against.
- Three past drawings with the final invoices
- Pick jobs you were happy to have won, with client names removed if you prefer. They show us the size, material and weld type of work that suits your shop. If none are available, we build the target list from your stated preferences alone, which is less precise.
- Written limits on weight and length
- Tell us the heaviest piece, the longest span and the thinnest sheet your shop will take on, as the works manager would say them. These limits stop us from attracting enquiries you must refuse. If the limits are unclear, the outreach brings in work you then spend visits declining.
- The estimator available for a short test
- The person who prices jobs needs to be reachable when the sample enquiry goes through, to say whether the details arrived are enough to quote. Their time is the only cost. If nobody can do this, the first real enquiry becomes the test, and a plant engineer sees the faults.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Count bays, cranes and qualified welders
We start at the shop with the owner and the works manager, walking the bays and noting crane capacity, bay lengths, the welders who hold current qualifications and the processes each can run. You decide which jobs you want more of and which you will turn down. What exists afterwards is a short written statement of the work your shop can take, which every later page and message is checked against.
- 2
Sort the last enquiries by what arrived
We read the enquiry register, the missed-call list and the marketplace messages from the past season, and mark which ones carried a drawing, which carried only a weight and a rate, and which came from a plant versus a contractor. You tell us which ones became orders and which wasted a visit. That gives the baseline figures we compare against at the end.
- 3
Write the drawing-first enquiry route
We draft the job-type pages and the form that asks for the drawing, the material, the weld specification and the site location before a rate is discussed. You approve the wording of each question, since your estimator knows which details change the quote. We also agree what the person who answers the phone says when the caller has no drawing yet.
- 4
Send a test drawing through the whole route
We submit a sample enquiry as a plant engineer would, using a real past drawing with the client details removed, and follow it from the form to the estimator's desk. You and the estimator confirm that it landed where expected, was readable and could be priced from what was sent. Faults in the form or the handoff are corrected before any outreach begins.
- 5
Read the new enquiries against the old register
We lay the new drawings, site visit requests and contractor calls beside the figures recorded at the start, split by source and by job type. You tell us which enquiries fitted your bays and which did not. From that we decide together which sources to keep working, which to drop and where the outreach list needs to change.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
How do we stop wasting time on price-check callers?
Should we chase contractors or plants first?
Can lead generation work for heavy fabrication?
What do we do when a plant engineer sends a drawing with no weld specification?
Who in the shop picks up the enquiries as they come in?
Do we have to stop working with our current contractors?
How soon will we see results?
Who will actually do the work?
What do you need from us?
More for welding fabrication companies
Related work to consider.
Closest to this: leads and follow-up
Also for welding fabrication companies
Or start from the overview: sales and marketing for welding fabrication companies.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.