Skip to content
GullySales

Smart home equipment stores · CRM

Keep one record per home, from the first question to the support call.

A CRM for a smart home store is one shared record of each household or project: the rooms, the devices, the quote, the install date and the support history. GullySales works on setting that record up, so that the next sale and the next fault both start from facts.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Smart Home & Security product collection

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For smart home equipment stores

Where it usually goes wrong, and what we would do.

  • “A home is a project, not a contact”

    A name and a phone number say little. The shop needs the flat, the wiring stage, the rooms planned, what was quoted and what was fitted, because every later conversation depends on them.

  • “Support history is the next sale”

    The household with a good curtain installation is the likely buyer of a lock. If the support record lives in an installer's phone, that chance is lost when the installer is away.

  • “Builder and designer accounts need their own view”

    One designer may send a run of homes. The shop needs to see which projects came through whom, which quotes are open and which show flats are pending.

  • “Warranty questions need an answer at the door”

    When a device fails, someone has to know the purchase date, the brand's terms and who installed it. A record that holds this saves the argument at the door.

What we do

What we deliver for smart home equipment stores.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A home-project record

    Fields for address area, build stage, rooms, devices, quote, installer and decision-maker.

    Result: Every household has one place that holds its story.

  2. A pipeline that follows the project

    Stages from enquiry to demo, quote, install and support visit, with an owner for each.

    Result: Nothing sits without a named person.

  3. A professional-partner view

    Designers and builders listed with their projects, open quotes and samples sent.

    Result: You see what each partner has brought.

  4. An install and warranty log

    Device, serial detail, installer, date and the warranty route recorded at handover.

    Result: A fault call is answered from the record.

  5. Reminders for the next conversation

    Prompts tied to a stage, such as a demo follow-up or a check after setup.

    Result: The team knows who to call today.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Fields a smart home store should record for each home and each partner.

Home and stage of build
Filled by the first person to speak with the buyer. Shows what can be planned and what must fit existing wiring.
Rooms and devices wanted
Filled by the demo staff. Lets the quote follow the buyer's own list, and helps you spot a second phase later.
Wiring notes from the visit
Filled by the installer. Records neutral wires, box depth and any problem, so the second visit does not start again.
Installed devices and dates
Filled at handover. Gives a base for support, warranty and a later upgrade conversation.
Designer or builder who referred
Filled at first contact. Shows which partners send buyers who go ahead, and which only ask for quotes.
Next conversation date
Filled by the owner. Prompts a call when a household is likely to move house or fit out another room.

Who it is for

This is written for these smart home equipment stores.

  • Smart switch and home automation dealers who also install
  • Smart lock and video doorbell stores
  • Security camera and smart sensor retailers
  • Voice assistant, smart speaker and smart plug sellers
  • Curtain, blind and motorised shutter specialists
  • Home theatre and lighting-control integrators
  • Electrical stores that added a smart home counter
  • Show-flat and builder package suppliers

Before you decide

When this may not be the right fit.

  • You have only a few active homes and one person already holds every detail in mind.
  • No installer would enter notes from site, so the record would lack the wiring facts that matter.
  • You expect software to produce sales, but no one is yet available to call the households it lists.

Before you decide

Agree the work. Know how to judge it.

CRM for smart home stores: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from smart home equipment stores. Anything missing is noted in the written scope, with who will supply it.

Every quote and invoice sheet
Share the quotes, invoices and notes as they are. The import starts from them, and papers kept only in a drawer must be photographed first. Include the chat notes that the counter has kept on WhatsApp, with a few screenshots, because a good share of the details of a project are agreed there and nowhere else. The import takes what is written down, and unwritten agreements stay with the installer.
Warranty terms from each maker
Gather the warranty terms for the products you sell. The log repeats them, and an unknown term is marked to be confirmed. Include the cards that come in the box and any papers the maker supplies, since the log repeats those terms. A warranty that differs by device is entered device by device, and an unknown one is marked for the shop to ask the maker.
A named owner of the record
Name who fixes entries and adds users. A record without an owner fills with duplicates. This person also settles who may see a project's record and who may export the list, which matters when a salesperson moves on. The rules go on a single page that sits with the counter.
The builders' and designers' contact list
List the professionals and their projects. The partner view starts from it. Add which of them want projects shown to them, and which prefer to be told by a call. The partner view is only helpful if the professional is willing to look at it, and some prefer a message.
Limits on what the record may store
Decide with your adviser what personal and security details are stored. Access codes and camera views stay out, and the record holds only what service requires. Write the rule down with your adviser and share it with staff, so that nobody types a lock code into a note by habit. The record then holds only what service requires, and nothing that would help a stranger enter a home.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List what you now record about a household

    We gather every sheet, quote, invoice and chat note kept about a household, and list the details each holds. You tell us which is trusted. What exists afterwards is a map of where the project's facts live and where they disagree. We also list which details are held on paper only, such as the wiring photographs an installer took at the site, because those are the facts a support call needs and the first to go missing when a person leaves the shop.

  2. 2

    Design the home-project record

    We draw a single record per home with rooms, devices, quote, installation date, warranty and support history. Staff at the counter and the installers each see what they need. The record fits on a phone. The record has a place for the rooms, the devices and their serial numbers, the quote and any change to it, and the dates of each visit. We check the layout by entering one real project from the invoice file before it is accepted.

  3. 3

    Build the stages from a real project

    We follow one project from enquiry to demo, quote, wiring check, installation and support, and name each stage. You adjust the names. The pipeline then follows the project and not a contact. Stages are named after events a person can point to, such as demo done, wiring checked, quote accepted, installed and handed over, and each stage says who moves the project on. You may add one for a project that waits on a builder.

  4. 4

    Add the partner view for builders and designers

    We set up a view that groups projects by the designer or builder who brought them, with the status of each. You see who sends work and who has gone quiet, and the professional's own client stays with the shop for support. The view lists a professional's projects with the stage of each and the next step due, and keeps the household's own details out of the professional's sight. You decide what a builder or designer may see in their own view.

  5. 5

    Set up the install and warranty log

    Each installed device is logged with date, serial, installer and warranty terms. The log answers a call at the door without a search through papers. Your technician checks the first entries. Each entry carries the device, the serial, the date, the installer and the warranty terms from the maker. The log is tried by looking up a customer who rings with a fault and answering from the screen, with the technician watching.

  6. 6

    Read the pipeline against the earlier counts

    We compare projects by stage, support calls answered and repeat orders with the counts recorded before the work. You see where projects stall and which support visit led to a new order. We look at where projects wait longest, and at households who called for support and then ordered again, since the log shows which fault was fixed. You choose which stage gets a named owner next.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need special software?
Not at first. A well-planned sheet or an ordinary tool in use in India can hold the fields. GullySales sets up the structure, and you decide the tool by how your team works.
Who should enter the data?
The person who speaks to the buyer and the installer who finishes the job. If entry waits for the office, details are forgotten, so keep the form short.
Should designers have their own record?
Yes, a separate record for each designer or builder, linked to the homes they sent. The reason is that one partner brings homes over time. It lets you see which partners are worth a visit and when to share a new product.
How do we record a warranty claim?
Add the date, the device and the fix to the home's record, and note who handled it. The reason is that a household judges the shop by how a failure is handled. Keep the record plain so any staff member can read it.
Which CRM will you recommend?
We choose after the stages and fields are written. A shop with a few projects at a time needs less than a chain does. We compare two or three options on price, language, WhatsApp link and export, and you decide. Check the supplier's current terms on storing customer data.
Should the CRM store door codes or camera access?
No. The record holds the project, the devices, the dates and the warranty, never a door code, password or camera link. Those belong to the household. If a technician needs access to fix something, the household provides it on the day. Take advice from your own adviser on security and privacy before connecting any tool to customer devices.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.