Skip to content
GullySales

Water heater and geyser dealers · Website

Let the first screen of the site say what you fit, where you fit it and how to call.

A website for a geyser dealer is a light, fast site showing what you stock, who fits it and how to reach the counter from a handset. GullySales plans the pages, drafts them with your staff and wires up the form and the call button so the first screen meets the buyer's first doubt.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Editorial illustration for Website design and development

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For water heater and geyser dealers

Where it usually goes wrong, and what we would do.

  • “The site repeats the maker's brochure”

    Pictures and specifications come straight from the brand, with nothing on your fitters, your area or your service. A buyer has no reason to ring you rather than the brand.

  • “Heavy pages on a weak signal”

    Big images crawl on a mobile connection, and a buyer with a leaking tank closes the tab before the page opens.

  • “Booking a fitting is a puzzle”

    The form wants a long list of answers, or the number is baked into a picture. A household in a hurry gives up.

What we do

What we deliver for water heater and geyser dealers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A first screen for a stressed buyer

    Your fitting areas, the types you service, a call button and a WhatsApp button at the top.

    Result: A screen a person with cold water can act on.

  2. A page for each heater type

    Storage, instant, gas and solar pages with a capacity guide, fitting notes and an enquiry form.

    Result: One page for each reason a buyer arrives.

  3. A fitting and service page

    What the fitter brings, the localities covered and a short booking form for locality, unit and preferred slot.

    Result: A form that hands the counter what it needs to book.

  4. A builder and designer page

    A quote request for bulk and project orders with the delivery details site teams ask for.

    Result: A separate door for project buyers.

  5. A phone speed pass

    Image sizes, fonts and scripts trimmed so the site opens on a weak connection.

    Result: A site that opens in the lane outside the shop.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

What the site must carry

What someone buying a geyser looks for on a dealer's site, and how to give it to them.

Your address and fitting areas
A map pin and a list of localities you fit in. A buyer drops a shop that never says whether it will come to the house.
Call and WhatsApp buttons
Placed on the first screen and pinned on mobile while the page scrolls, for the buyer whose tank is failing now.
A capacity guide
A plain table matching household size to litres on each type's page, so the buyer can narrow the choice before asking.
Fitting and warranty terms
What the fitter brings, what is left out and where a warranty claim goes, taken from the maker's terms and your own policy.
Photographs of your own shop
The counter, stocked shelves and a unit fitted on a wall. A buyer sets these against a stock image and believes the first.
A short enquiry form
Name, phone, locality, unit and the fault, in four or five fields, so the counter can return the call with a rate.

Who it is for

This is written for these water heater and geyser dealers.

  • Storage geyser retailers for homes and flats
  • Instant water heater and compact geyser sellers
  • Gas geyser dealers in cities with piped or cylinder LPG
  • Solar water heater dealers and installers
  • Heat pump and commercial water heating suppliers for hostels and hotels
  • Multi-brand electrical and bath fittings shops with a geyser counter
  • Builder and bulk-supply dealers
  • Authorised service and spare-part dealers

Before you decide

When this may not be the right fit.

  • Your stock list changes by the hour and nobody can edit the site, so pages would list units already sold out.
  • No phone is answered during shop hours, so a prominent call button would send buyers into silence.

Before you decide

Agree the work. Know how to judge it.

Website for water heater and geyser dealers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from water heater and geyser dealers. Anything missing is noted in the written scope, with who will supply it.

Your logo and shop colours
Files of the logo in good quality and any colours you use. If you have only a signboard photograph, we recreate the logo and ask you to approve it. If a printer or an old designer made the logo, ask them for the original file rather than a photograph of a printout.
Photographs of stock and fitted units
Clear pictures of the heaters on the shelf and on a wall. Poor images lower trust. If none exist, we plan a photo visit before launch. Wide pictures taken in daylight work best on a phone screen, and a tidy wall around the unit looks better than a close crop.
A list of what the fitting includes
The pipes, valve and point checks you supply, and what is charged extra. The fitting page is written from it. Without it the page stays vague, and buyers ask on the phone. Mark any item that varies by flat or house, since buyers read that line first and the page must match what the fitter does.
Domain and hosting details
The registrar and host account names and who holds the logins. If a former designer controls them, we help you recover them before launch. Also note where your email is hosted, because a change of host can break shop mail if it is done carelessly.
A builder and designer price approach
Whether you quote project buyers on the site or by call. The page follows your choice. Without it, we point such buyers to a phone call only. If you quote by call only, say so plainly, and the page will invite a call with the quantity and the delivery place stated.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sketch the first screen at the counter

    We start on paper with the owner and the counter person, deciding what a worried buyer must see first: what you stock, that you fit it and how to reach the counter. You choose the single action to put first, a call button or a short form. Every other part of the design is tested against that first screen.

  2. 2

    List the pages by heater type and buyer

    From your stock and your sales we list the pages needed: one for each heater type, a fitting and service page and a page for builders and designers. You remove pages for buyers you do not want. The list becomes the site map and the order in which pages are written. Each page is given one purpose and one next step, so a visitor is never left choosing between ten buttons.

  3. 3

    Write each page with the counter staff

    We draft every page from what your counter says in the shop and from your fitting practice. The senior counter person corrects the capacity statements. You approve the fitting and warranty wording first, since buyers read it closely. A page signed off is then built.

  4. 4

    Design the fitting booking to be easy

    We make booking a fitting a short form on a phone: the area, the unit and a number to call back. The coordinator tests it. The form sends to the inbox and the log you named, so no request is lost between the site and the counter. The coordinator also checks that the confirmation message names the area and the unit, so the buyer knows the request arrived.

  5. 5

    Trim the pages for a weak signal

    We reduce picture sizes, remove heavy scripts and test the pages on a phone on a poor connection. You try it in the shop. Pages that wait to load lose the buyer, so each page is cut until it opens at once on a modest handset.

  6. 6

    Read enquiries and speed after launch

    We compare the calls, forms and bookings from the site with the figures noted before launch and check page speed again. You tell us which became sales. We adjust pages where buyers left. No ranking or sales figure is promised, only a record of what the site did.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Does a marketplace listing replace our site?
It brings buyers to the listing, not to you. Your own site carries your fitting promise, your areas and your service, and the enquiry reaches your phone with no commission on top.
Do we need the site in our local language?
Offer the language spoken at your counter on the first screen, the fitting page and the form. Keep English alongside for contractors and institutions.
How fast must the site be on a phone?
Fast enough for the call button to appear before a buyer on a poor signal gives up. Small images and few scripts do more than animation.
Who should own the domain and hosting?
The shop. Register both in its name and hold the login yourself, because a site you cannot move belongs to whoever built it.
Does a marketplace listing replace our own site?
No. A marketplace shows your units beside your competitors' and holds the buyer's attention for itself. Your own site shows the fitting, the area you serve and the people who come, and it carries your phone number without a fee on each lead. Keep the listing as one door and send visitors on to the site. We record which door each enquiry used so you can judge the value of each.
Whose name should the domain and hosting carry?
The owner, in the shop's name and with the owner's email. A site registered in a designer's or a helper's name can be lost when they leave or stop paying. We ask for the registrar details at the start and, if the names are wrong, help you move them. We hold no login after the work ends unless you ask us to, and we give you a list of every account the site uses.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.