Skip to content
GullySales

FMCG distributors · Field sales beat planning

A beat should follow what each outlet can buy, not what a salesperson prefers.

Field sales beat planning for an FMCG distributor draws the list of outlets, sorts them by what they buy and what they could, and sets the visit order and call purpose for each salesperson. GullySales builds the plan from your invoices and the salespeople's own knowledge, and writes the visit record that shows whether it is being followed.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

FMCG distributors: show a real physical business scene illustrating Beat plans and outlet master. Group outlets into beats by day, record each outlet’s type, owner and phone, and see which shops were visited and which placed no order.

What field sales beat planning means

Field sales beat planning fixes which outlets or accounts each of your representatives visits, in what order and how regularly you decide. GullySales classifies the accounts, builds the beat plans and the visit record, and writes the review your supervisor runs against them.

Last updated 14 Nov 2026.

For FMCG distributors

Where it usually goes wrong, and what we would do.

  • “The beat grew by habit, not by design”

    A beat began as a list a salesperson wrote on joining, and it has been patched ever since. Outlets were added when someone walked past them, and closed shops stayed on the list. One salesperson crosses town twice while another has a compact route. Because nobody drew the whole territory at once, the same outlet may be visited by two people, and a street near the godown may be visited by none.

  • “Every outlet gets the same visit”

    A busy provision store that sells out of fast lines every few days is called on at the same interval as a small shop that reorders rarely. The busy store runs short and the small shop is pressed to take stock it cannot sell. A plan that sets visit frequency by outlet class, with the rule written down, stops the time of the salesperson being spread evenly over outlets that need very different things.

  • “Company coverage targets pull against profit”

    Companies measure a distributor on coverage, the number of outlets billed in a period, and on the lines each outlet takes. A salesperson chasing a coverage figure may visit a long run of tiny outlets that order once, while the shops that keep the godown busy are neglected. A beat plan weighs the company's coverage expectation against the cost of serving each outlet, so the owner chooses the balance on purpose rather than by accident.

  • “Without a visit record, nobody knows what was covered”

    When a scheme launches, the owner asks which shops were told and no one can say. Salespeople remember visits differently, and the register shows only the invoices that came back. A simple visit record, with the outlet, the date, the reason and the result, tells you which outlets were visited, which were skipped and which gave no order, and it makes the next plan easier to build.

What we do

What we deliver for FMCG distributors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Outlet master list

    One list of every outlet in scope, with name, address, contact, outlet type, the company codes it buys and the salesperson who calls on it today. Duplicates and closed shops are marked, and your supervisor signs off the list before any beat is drawn.

    Result: There is a single outlet list that your supervisor has approved and that every beat is built from.

  2. Outlet class sheet

    Each outlet is placed in a class from the sales you have recorded and the potential your own team can see, such as shelf size and footfall. The rule for each class is written, so a salesperson can challenge a placement and a new outlet can be classed the same way.

    Result: Every outlet has a class, and the rule that put it there is on one page.

  3. Beat plan for each salesperson

    A document per salesperson listing the outlets in the beat, grouped by area and put in route order. Each carries the visit frequency you chose for its class and the call purpose for the stop, such as take the order, collect payment or launch a scheme.

    Result: Each salesperson holds a printed or phone beat showing outlet order, frequency and purpose.

  4. Route sequence and coverage map

    The order of stops drawn on a map of the territory, with the day each cluster falls on. Outlets that sit far from the rest are flagged so you can decide whether to keep them in the beat, serve them from a van on a fixed day or hand them to another supplier.

    Result: You can see on one map which areas are covered, which overlap and which are not visited.

  5. Visit record form

    A short form, on paper or on a phone, for each stop: the outlet, the date, what was discussed, the order taken, the stock noted and the reason when no order came. It is built to take a short entry, so salespeople fill it in on the beat and not at night.

    Result: Every visit leaves a line your supervisor can read the same day.

  6. Beat review sheet for the supervisor

    A page that compares the plan to the visit record: planned visits against made, orders against calls and outlets not seen. It shows where the plan was not followed and whether the reason was the plan or the person. It lets the supervisor correct a beat with facts.

    Result: The supervisor can name the outlets planned but not visited, with the reason for each.

How the result is measured

  • Planned visits against visits recorded
  • Outlets not visited in the beat cycle
  • Calls by outlet class

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these FMCG distributors.

  • Distributors for packaged food, biscuits and snacks brands
  • Home and personal care distributors for soaps, detergents and toiletries
  • Beverage and bottled water distributors with chilled-outlet coverage
  • Staples and edible oil distributors serving wholesalers and kiranas
  • Dairy and ice cream distributors with cold-chain vehicles
  • Multi-brand FMCG distributors holding four or five company codes
  • Super stockists who supply sub-distributors in several towns
  • Modern trade and institution suppliers to supermarkets, canteens and hotels

Before you decide

Agree the work. Know how to judge it.

Field sales beat planning for FMCG distributors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Map the accounts, travel pattern, and purpose of each visit. Distinguish a useful buyer meeting from a visit recorded only to meet an activity target.

Make the scope clear

Agree territory coverage, visit priorities, and how notes reach the rest of the team. Include the handover for quotations or technical questions that cannot be resolved on site.

Check the work in use

Review what changed after the visit: a requirement clarified, an agreed trial, or a next decision. Compare time spent with account potential and the quality of follow-up.

Know when to change course

If a routine update can be handled remotely, reserve travel for work that needs a visit. Do not expand coverage beyond the team's ability to follow through.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from FMCG distributors. Anything missing is noted in the written scope, with who will supply it.

Invoice and order history by outlet
A register of sales by outlet for a long enough period to show which shops buy steadily and which do not. It gives the class sheet its base. Without it, classes rest on the salesperson's memory and the loudest outlet is classed as the biggest.
The salespeople's notebooks and route lists
Whatever each salesperson uses now, even a notebook or a list on a phone. The books hold outlets the invoices never show, such as shops that order through a wholesaler. If the notebooks stay with the salespeople, the master list misses outlets and the plan covers only the ones already billed.
The company's coverage and range expectations
The targets or norms the company sets for outlets covered and lines stocked, in writing if they exist. The plan has to weigh them against cost to serve. When the expectation is only spoken, the supervisor writes it down so the beat is built to a known figure.
A map of the territory and vehicle details
A road map or the area boundaries given by the company, and how each salesperson travels: on foot, two-wheeler or a van with stock. Travel mode decides how long a stop takes, so how few or how many stops a beat can hold. When this is missing, the plan promises more visits than the road allows.
A supervisor with time to review
One person who can check the outlet list, class rules and each beat with the salespeople. The work depends on their knowledge of the ground. When they are too busy, corrections arrive late, the beats go out with errors and the salespeople stop trusting the plan.

How it works

How the field sales beat planning work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Fix the scope and the rules that stay

    You tell GullySales which salespeople, areas and outlet types are in scope. Your supervisor names the rules that cannot move, such as a modern trade account that one person must keep, or a salesperson who covers a district for a language reason. Scope, fee and term are set in writing first.

  2. 2

    Consolidate the outlets and class them

    GullySales gathers your invoices, order books and the salespeople's notebooks into one outlet list and proposes classes. Your supervisor and the salespeople correct the list, adding shops the books never recorded and removing ones that have closed, before the classes are fixed.

  3. 3

    Choose the visit frequency for each class

    You decide how regularly each class is visited and what a visit must achieve. GullySales then groups outlets into beats, sequences the route and shows the time each beat asks of the salesperson, so the owner sees whether the beat is a reasonable day or an impossible one.

  4. 4

    Walk each beat with the salesperson

    Each salesperson reviews their own beat on the ground before it is issued. Road closures, market days, shop hours and outlets that no longer exist surface here, and the plan is corrected. A beat the salesperson believes in is followed, and one imposed from a desk is quietly ignored.

  5. 5

    Start the visit record

    The visit form is issued and the supervisor is shown how to read it. A short briefing explains what each field is for and what is not asked. For the first run of beats, the supervisor checks a sample of entries against the shops, so the record can be trusted before it is used to judge anyone.

  6. 6

    Read the beats against the earlier record

    After the beats have run, GullySales compares planned visits, orders and outlets covered with the figures taken from your registers before the work began. We report what moved and what did not, and what the supervisor should change in the next plan. The master list and class rules pass to the person who maintains them.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

What is a beat plan for an FMCG distributor?
It is the written route a salesperson follows: which outlets, in what order, at what interval and for what purpose. It is built from your outlet list and sales records, grouped by area so the route is sensible. It replaces the habit of each salesperson choosing their own stops, and it gives the supervisor something to check the day against.
What number of outlets should one salesperson cover?
There is no single figure, because it depends on how far apart the shops are, how the salesperson travels, how long an order takes and what the visit must achieve. The plan shows the time each beat asks of the person, and your supervisor and the salesperson judge whether it is a workable day. We do not set a number from outside.
Will the salespeople resist a new beat?
Some will, especially if a beat takes away an outlet they have held for a long time. That is why each salesperson walks their beat before it is issued and can challenge a class or a stop. Where a rule must move an outlet, the supervisor explains the reason, and the visit record later shows whether the change made sense.
Do we need a tracking app or a GPS tool?
No. A paper form or a simple phone form is enough to begin. A tracking tool is a separate decision for you, and we can say what the record should capture so you judge any tool against it. We do not choose or resell software, and the beat plan stands without one.
What about outlets that are too small or too far to visit?
They are marked on the coverage map and you decide: serve them on a fixed day, supply them through a wholesaler, take orders by phone or message, or leave them. The plan shows what each choice costs in salesperson time. We state the cost and the options and the decision stays with the owner.
Does the plan change when the company changes a scheme or a territory?
The outlet list and class rules are written so that your supervisor can change them. A new scheme changes the call purpose at a stop. A new territory is added as another set of outlets and the same method applied to it. We hand over the master list and the rules so you can update them without us.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.