Skip to content
GullySales

Aluminium profile manufacturers · Website

Build a site where a fabricator checks a die, a finish and a rate route on a phone.

A website for an extruder is the set of section pages, finish pages and enquiry forms through which a fabricator or specifier checks your range and sends a drawing. GullySales plans its structure, wording and forms around the way your buyers actually enquire.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Staff and customers inspect window frames and profiles in a showroom

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For aluminium profile manufacturers

Where it usually goes wrong, and what we would do.

  • “The site is read on a phone at a workshop”

    A fabricator reading your site is standing at a bench or a site with a phone. A heavy home page, a catalogue that needs pinch and zoom and a form of ten fields all lose that reader before any rate is requested.

  • “Section pages need data, not slogans”

    A page that says high quality aluminium profiles gives a buyer nothing to check. Weight per metre, alloy, lengths and finishes let a fabricator decide whether to ring. Facts are what a visitor came for.

  • “The drawing upload is the main button”

    A visitor who can attach a drawing and a quantity gives you what a quote needs. A contact form asking only for a name and message leads to a second round of questions and a lost day.

  • “Trust comes from the plant and the paper”

    Photographs of your press and finishing line, finish test reports and a plain address and map reassure a fabricator who has not met you. Stock images of buildings do not.

What we do

What we deliver for aluminium profile manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Site structure and wording

    A page plan for home, sections, systems, finishes, applications, plant and contact, with plain wording written for fabricators.

    Result: Each type of visitor has a page that answers their question.

  2. Section and finish pages

    Pages built from your master sheet with drawing, weight, alloy, lengths and finishes.

    Result: A fabricator can verify a die before phoning.

  3. Drawing and rate request form

    A short form that takes a drawing, section, finish, quantity and delivery town.

    Result: A quote request arrives with what the desk needs.

  4. Plant and test report page

    Photographs of the press, anodising and coating lines with downloadable reports for finishes and thermal systems.

    Result: A new fabricator can see the plant and the reports.

  5. Phone-first review

    A test of the site on ordinary phones and slow connections, with a written list of fixes.

    Result: You hold a list of faults found on real phones.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

Give each fabricator search a page that answers it.

aluminium sliding window profile catalogue
A section index for window profiles with drawing, weight and finishes on each page, built for a phone.
aluminium profile powder coating colours
A finish page showing shades and what is in stock, linked to the sections each shade is available on.
curtain wall aluminium section manufacturer
A system page with sightlines, glazing options and the downloadable test report for specifiers.
send drawing for aluminium extrusion rate
The enquiry form, with a drawing upload, section, finish, quantity and delivery town.
aluminium extrusion plant visit
A plant page with photographs of the press and finishing lines, address and map, for a fabricator who wants to see you first.

Who it is for

This is written for these aluminium profile manufacturers.

  • Extruders of architectural sections for windows, doors and partitions
  • Anodising and powder coating extruders selling finished lengths
  • Curtain wall and structural glazing section makers
  • Industrial profile makers for conveyors, machine frames and enclosures
  • Solar mounting structure and rail section suppliers
  • Furniture, kitchen and wardrobe profile makers
  • Extruders with a branded window system sold through licensed fabricators
  • Smaller extrusion units supplying a district or a state

Before you decide

When this may not be the right fit.

  • Your section data is spread over catalogues and memory, so a site would publish weights and lengths that no one has checked.
  • Nobody can price a drawing sent through the form, so a drawing upload would collect files that wait unanswered.

Before you decide

Agree the work. Know how to judge it.

Website for aluminium profile manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from aluminium profile manufacturers. Anything missing is noted in the written scope, with who will supply it.

Section data in one clean sheet
The weight, wall thickness, alloy, temper and finishes for every active section, in one file your technician has checked. A spreadsheet is best. Without it, pages are built from mixed sources and a wrong weight can reach a fabricator's cutting list. Mark any section still under change so it is held back until the figures settle.
Photographs of sections and the plant
Clear photographs of the main sections, the finishes against light and the plant floor. Phone shots are acceptable if sharp and well lit. If few exist, we plan a photo visit; without photographs the pages carry drawings only and look thin. Plain backgrounds help. Plain backgrounds and even light make the finish look true on the page.
The domain and hosting logins
The company must control the domain registration and the hosting account. A copy of the latest bill or the registrar email helps us trace them. If a former vendor holds them, the transfer must happen first, or the new site goes up on a link you do not own.
Test reports you are willing to display
Any report on finish, coating thickness or strength that you are happy to show, with permission from the lab. Do not send reports under confidentiality. If none can be shown, the trust page rests on the plant, certificates held and the works address. We list what is shown against its source.
A person who will update the site
Dies change, finishes are added and prices are not shown but contact details move. Someone must own those updates after launch, and we train them. Without a named person, the site slowly drifts away from what you actually extrude. Add a second name as backup, so a leave does not freeze the site.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List the sections and finishes to show

    We start with your die list and the finishes you hold, and ask which sections fabricators ask for first. You tell us which dies are active and which only exist on paper. The site's section pages are chosen from this list, so nothing appears that you cannot supply. Dies still on paper are left out.

  2. 2

    Get the domain, hosting and old site access

    We need to know who holds the domain, who hosts the existing site and whether any logins are lost. You help us recover what is missing. The domain stays in the company's name, and we record every login in a place you control. A written list of logins goes to you.

  3. 3

    Sketch the pages on paper first

    We draw the home page, the section list, a section page, the finish page, the drawing request form and the plant page on paper, and go through them with you and one fabricator-facing salesperson. They tell us what a fabricator looks for first. You approve the sketches. They also say which words fabricators actually use.

  4. 4

    Load the test site with section data and photographs

    We load the section data, the photographs and the plant details onto a test site that only you can open. Your technician checks every weight and finish against the die sheet and your desk tries the drawing form. Corrections are made before anyone outside sees it. Corrections are logged so the changes can be traced.

  5. 5

    Test the drawing upload on real phones

    We open the site on the phones your fabricators use, on the signal a workshop gets, and upload a real drawing through the form. The enquiry must arrive at the desk and the register. Anything slow, hidden or confusing is fixed. You give the final approval for launch. Slow pages are shortened.

  6. 6

    Go live and read enquiries against the baseline

    After launch we check that forms, buttons and pages work on the live address, hand over every login and show your team how to change a die. Later we compare drawing requests and quotes from the site with the enquiry figures recorded before it. You decide the next pages to add.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should the site show a price list?
Show weights, finishes and lengths. Rates move with the metal and your costs, so give them on enquiry unless you can keep a dated sheet current.
Do we need an online order system?
Rarely. Profile orders carry drawings, finish choices and credit terms that are better settled by a person. A good enquiry form feeding the register will do more at this stage.
Who updates the site when a die changes?
One named person, from the master sheet. GullySales builds the site so that a change to a die is made in one place. Without an owner, the site goes stale.
Should every finish shade have its own page?
Only the shades you hold and can repeat. A shade page with a photograph helps, but phone screens change colour, so say a physical sample is the reference. Listing shades you seldom run invites orders you cannot match.
Do all the colours in the finish range need separate pages?
Only if buyers search for the shade by name. A finish page can cover a group of shades with a clear photograph of each and a note on how they are controlled between lots. Separate pages for every shade spread thin content across a long list of addresses. We decide the split with you after looking at what fabricators ask your desk. A note on how shade is controlled between lots sits on the finish page, where a fabricator looks for it. We confirm the wording with your quality person before it goes up.
Can the site show which dies are in stock?
It can, if someone updates the stock list each time it changes. A stale stock note is worse than none, because a fabricator will plan a job around it. We advise showing the sections you run as a range and leaving live stock to a call or chat with the desk. We advise showing the sections you run as a range and leaving live stock to a call or a chat with the desk, who can confirm the position at the time of the enquiry.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.