Skip to content
GullySales

Auto parts manufacturers · Marketing collateral

Put the part number, the fit and the pack size on the page the buyer keeps.

For an auto parts manufacturer, brochures and catalogues are the documents a distributor, counter salesperson or purchase team keeps at hand: an application catalogue indexed by part number and vehicle, a product brochure for a new range and a lighter edition for phones. GullySales builds them from your own part records, with a dated master your sales team and branches share.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of auto parts manufacturers at work in India

What marketing collateral means

Marketing collateral is the brochures, catalogues, price lists and presentation decks a sales team hands to a prospect during a meeting. GullySales designs and keeps these updated so the sales team is never explaining a price or a product that has since changed.

Last updated 14 Nov 2026.

For auto parts manufacturers

Where it usually goes wrong, and what we would do.

  • “A catalogue is used as a lookup, not read as a story”

    A counter salesperson holds a worn part and needs the replacement number in a few seconds. A purchase manager compares your brake components with two other makers across a table. Neither reads a company history first. The pages that matter are the vehicle index, the part number index and the table of dimensions, and we plan the document around those lookups before anything is designed.

  • “Printed prices go out of date while the copies stay in circulation”

    A price printed beside a part number is quoted back to you by a distributor months later, after a raw material change. Branches add handwritten corrections and the buyer no longer knows which figure holds. We recommend a dated price sheet kept apart from the catalogue, so the catalogue stays current on specification and the price sheet carries the commercial terms.

  • “Superseded and dropped parts stay in old editions”

    A distributor keeps last edition's catalogue on the counter and orders a part that has since been redesigned or replaced by another code. The wrong part arrives and the return lands on your desk. Each edition carries a revision date and a supersession note, so a buyer holding an older copy can find what replaced a code.

  • “The same range is described three different ways”

    The website says one thing, the printed catalogue another and the salesperson's phone a third, because each was typed separately. A buyer who notices two different pack sizes for one part doubts the rest. We work from one part record and build every format from it, so descriptions, codes and dimensions agree wherever the buyer looks.

What we do

What we deliver for auto parts manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Buyer-led content plan

    A page order built around how your buyers search: by vehicle make and model, by part family and by part number. Your sales lead checks it against the questions distributors ask before they request a quotation, and unneeded history pages are cut.

    Result: A buyer can find a part by vehicle, by family or by number from the index pages.

  2. Part information checklist

    A record of the code, name, dimensions, material, fitment, pack size and image needed for each part. Missing details and discontinued items are flagged for your approval before any layout begins.

    Result: Each part in the document has its fields complete or is marked as held back.

  3. Approved part and application copy

    Descriptions written from your current records, keeping the technical terms a buyer expects. Fitment statements follow your application charts, and your product owner checks accuracy against the source before the proof is made.

    Result: No fitment line appears in the document without a chart behind it.

  4. Catalogue and brochure layouts

    Designed pages following your brand guidelines: an application catalogue with index and cross-reference tables, plus a shorter brochure for a new range or an OEM visit. You review reading order, image placement and table clarity before the full document is approved.

    Result: The index and the tables are readable on the printed page at the size the counter will use.

  5. Print-ready files and paper proof

    Press files prepared to your printer's requirements, with paper stock, binding and quantity agreed. A paper proof is checked by your approver before the print run is released.

    Result: The printed copy matches the approved proof, page for page.

  6. Phone edition and dated master

    A lighter PDF for WhatsApp and email, checked for readable tables on a phone, and one editable master with a version date and a record of approved changes. A named owner holds the master.

    Result: Every branch and salesperson can be pointed to one current edition.

How the result is measured

  • Materials in active use
  • Update turnaround time
  • Sales team usage

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these auto parts manufacturers.

  • Component manufacturers supplying OEMs
  • Aftermarket spare parts manufacturers
  • Export-focused parts manufacturers
  • Tier 2 and Tier 3 component suppliers
  • Two-wheeler parts manufacturers
  • Commercial vehicle parts manufacturers
  • Casting and forging units supplying parts
  • Manufacturers with an in-house aftermarket brand

Before you decide

Agree the work. Know how to judge it.

Brochures, catalogues and marketing materials for auto parts manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring questions from sales calls and examples of objections that delay a decision. Choose a subject expert who can check the substance, and identify evidence that can be published.

Make the scope clear

Agree the reader, buying question, format, and distribution route for each piece. Set the approval process and distinguish new research from rewriting material you already have.

Check the work in use

Ask a colleague to use the draft in a real buyer conversation. It should answer the question, support its claims, and make the next step clear without requiring a sales pitch to explain it.

Know when to change course

If the same unanswered question appears in several articles, improve the strongest page before commissioning another. More words are not a substitute for missing evidence.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from auto parts manufacturers. Anything missing is noted in the written scope, with who will supply it.

Complete part information
Names, dimensions, materials, codes and fitment must come from your records, not from memory. A spreadsheet or an old catalogue is enough to start. Where facts are missing, those parts leave the document or wait, and one gap can hold up the whole proof.
Photographs of the parts as made now
Layouts need clear images of the current part, including any change to packaging. Existing photographs are acceptable if they show what ships. Without them pages use placeholders, and a picture of the wrong variant is how a return begins.
A decision on prices
Someone must decide whether prices appear in the catalogue, go on a separate dated sheet or stay out. Without the decision the layout is built twice, or an old price reaches a document a distributor keeps on the counter for a long time.
One owner of the master file
A named person holds the editable master and approves each revision after handover, even a small correction. Without an owner, branches edit their own copies and several editions circulate among distributors.
Brand files and printer details
Logo files, colours, fonts and your printer's requirements decide how the artwork is built. Missing brand files can be recreated, but that is separate effort. Without printer details, print-ready files cannot be prepared with confidence.

How it works

How the marketing collateral work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Settle the buyer and the document

    You tell us who will hold the document: distributor counters, OEM purchase teams or export agents. We agree whether the job is an application catalogue, a product brochure or a short leave-behind, and note how frequently buyers now ask for specifications by phone, so the result has a baseline.

  2. 2

    Hand over part records and photographs

    Your team supplies the live part list, current drawings, application charts, photographs of the parts as they are now and brand guidelines. A named owner resolves gaps and confirms which parts belong in this edition and which are retired.

  3. 3

    Approve structure and a sample spread

    GullySales prepares the page order and one sample spread with a table, an index entry and a part photograph. Your sales lead checks that a counter salesperson could find a replacement number from that spread alone.

  4. 4

    Sign off the full proof

    Your nominated approver checks the complete copy against current records: codes, dimensions, fitment lines and pack sizes. Any approval or standard named in the document goes through your own quality adviser before the proof is signed.

  5. 5

    Print and release to the sales team

    After proof approval the press file goes to the printer and the phone edition goes to your sales lead. The handover names the current edition and replaces the old shared copy, so branches stop passing around last edition's file.

  6. 6

    Agree who owns revisions

    We agree who reports a changed part and who approves the correction, and how an update note reaches distributors who hold older editions. Later revisions are included only for the scope and term agreed in writing, and the baseline figure is read again at the next edition.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 4, presentation and proposal. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should the catalogue be printed, a PDF or both?
Both, for a parts business that sells through counters. The printed copy lives on distributor counters and in OEM meetings, and the phone edition travels on WhatsApp and email. They are built from the same master, so a code or dimension cannot differ between them. We confirm the mix with your sales lead, who knows where buyers actually open the document.
Do prices belong in the catalogue?
We recommend a separate dated price sheet. A printed price is quoted back to you long after a raw material change, and branches cannot honour two figures. Keeping prices apart lets the catalogue stay current on specification. If you decide to print them, we label the edition date clearly and the decision stays with you.
How do you organise a catalogue for thousands of part numbers?
By how buyers look things up: a vehicle index, a part family section and a numeric index with cross-references. We plan these before layout and test them with a few real searches from your counter staff. A catalogue that makes a salesperson page through every family to find one code has the right parts and the wrong order.
Can you add original equipment references and fitment?
Only where your own records or customers have confirmed them. We build the tables from your application charts and equivalence lists and hold back any line without a source. A wrong cross-reference creates a returned order, so the line stays out until your engineer signs it, however useful it would look on the page.
What happens when a part is redesigned after we print?
Copies already printed stay as they are, since a digital master does not correct paper in distributors' hands. We build a revision note and a supersession line into the next edition, and agree how update notes reach distributors who hold older copies. Changes after print approval can need new artwork and another run.
Is a new brand identity part of this work?
No. The documents follow your existing brand guidelines. A new identity, product photography, a corporate profile or a capability presentation each need their own scope. If your logo and colours are inconsistent, say so at the start and we will tell you whether the layout can proceed or a separate step is needed first.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.