Skip to content
GullySales

Auto parts manufacturers · Product launch events

Show a new part range to the distributors who will have to stock it.

A product launch event for an auto parts manufacturer is the day distributors, workshop owners and key buyers see a new part range in person, with the part in their hands and fitment explained. GullySales plans the guest list, invitations, demonstration and lead capture with your team, then prepares the follow-up calls.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A presenter introduces a kitchen appliance to an invited showroom audience

What product launch events means

A product launch event is the one day, in a hall, showroom or plant, when invited buyers see a new offer first-hand. GullySales plans the guest and dealer list, invitations, run-sheet, demonstration and lead capture with your team, and prepares the follow-up so each guest gets a call that refers to what they saw.

Last updated 14 Nov 2026.

For auto parts manufacturers

Where it usually goes wrong, and what we would do.

  • “A part is a hard thing to sell from a slide”

    A distributor judges a brake pad or a filter by holding it, checking the finish and the box, and asking about fitment. A launch where the parts are behind glass or only shown on screen takes away the thing the visitor came to do.

  • “The guest list decides the order book”

    A hall full of friendly faces who will not stock the range counts for little. The list should name distributors with capacity for the new line, workshop chains that fit it and mechanics who influence a counter, each with a reason to attend.

  • “Demonstration beats claims”

    A fitment table with the actual vehicle parts, a side-by-side of old and new pack, and a technical person ready to answer give the visitor something to test. Claims about durability on a banner invite doubt unless backed by your test records.

  • “The event ends and the follow-up never starts”

    Business cards collected at the entrance sit in a box while the team returns to production. A call that refers to the part the guest picked up is far more likely to be taken than a general call a fortnight later.

What we do

What we deliver for auto parts manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Guest and distributor list

    A sheet of invited distributors, workshop owners, fleet buyers and mechanics, each with the reason to attend and the host who greets them. You approve every name.

    Result: Each guest has a named host and a stated reason to be there.

  2. Venue and demonstration brief

    A written brief on the room, power, seating, display tables and the fitment demonstration. Your event owner confirms the venue and contractors; GullySales does not book or pay them.

    Result: The venue owner and your team work from the same page.

  3. Invitations and reply sheet

    Invitation wording for email and WhatsApp, a reminder, and a reply sheet showing who confirmed and who needs a personal call.

    Result: You can see who is coming before the day.

  4. Run-sheet and talking points

    An order of the day with who speaks, who demonstrates and who hosts, and short talking points on fitment, packs and ordering that keep to your approved facts.

    Result: Every speaker says the same thing about the range.

  5. Lead capture and call-back plan

    A capture form for part interest, stocking intent and best contact, with a call script that mentions what the guest saw.

    Result: Every guest is assigned a named caller on the day after the event.

How the result is measured

  • Invited guests, confirmed guests and guests who attended
  • Capture records with a stated requirement and next action
  • Time to first call after the event

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these auto parts manufacturers.

  • Component manufacturers supplying OEMs
  • Aftermarket spare parts manufacturers
  • Export-focused parts manufacturers
  • Tier 2 and Tier 3 component suppliers
  • Two-wheeler parts manufacturers
  • Commercial vehicle parts manufacturers
  • Casting and forging units supplying parts
  • Manufacturers with an in-house aftermarket brand

Before you decide

Agree the work. Know how to judge it.

Product launch events for auto parts manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Name the buyers you want to meet and the reason for them to speak with you. Bring a product or service story that can lead to a useful next conversation after the event.

Make the scope clear

Agree the event activity, demonstration material, enquiry capture, and follow-up responsibilities. Separate venue or sponsorship spend from production and sales preparation.

Check the work in use

Review the conversations that had a recorded need and agreed next step. Track them through proposals and orders instead of treating badge scans as qualified opportunities.

Know when to change course

If nobody can follow up after the event, reduce the activity to what the team can handle. A full contact list with no next action is not a sales pipeline.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from auto parts manufacturers. Anything missing is noted in the written scope, with who will supply it.

The final list of parts in the new range
The brief and the invitation are written about specific parts. Bring the range with part numbers and fitment. If it is still changing, we write the invitation only when the range is settled, because a wrong part on a card cannot be recalled. Include any part still awaiting approval, marked clearly, so that no guest hears a promise that the plant cannot yet keep.
Sample parts for demonstration and handling
Guests judge by holding the part. Arrange enough samples for the tables and the fitting demonstration. Without them the event becomes a presentation, which is a weaker case for a component that buyers want to feel and compare. Mark which are for handling and which for fitting, since a part that is fitted cannot be sold afterwards without a note. Pack a few extras for breakage and loss.
A technical person to demonstrate fitting
The demonstration needs someone who can fit the part and answer questions from mechanics. Name them and agree their time. If nobody is free, we hold the date, because a clumsy demonstration does more harm than none. A second person who can step in is welcome, because the best demonstrator is also the one likeliest to be pulled away by a guest at the wrong moment.
A budget and a ceiling on guests
The owner must set what can be spent and how many guests are invited. We plan inside it. With no ceiling, the guest list grows, the sales team is stretched thin, and the quality of every conversation drops. Include the cost of samples and travel, not only the hall, because an event that overruns its cost harms the next one. Add a spare margin for the unexpected cost.
A sales team free for the follow-up calls
The event only pays when the calls happen afterwards. Tell us who is free in the days that follow. If the team is committed elsewhere, we plan a smaller event, so the follow-up is not lost. Block those days in diaries before the invitations go out, and make sure that nobody on the list is on leave or away. Check leave dates for every key person.

How it works

How the product launch events work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Name the guests who decide the order book

    With the sales head we list the distributors, workshop owners and key buyers whose stocking decision matters for the new range. You rank them. The guest list is cut to the number your demonstration space and your sales team can look after properly on the day. Names are checked against the order history, so the list is built from buyers and not from habit.

  2. 2

    Say what each guest must hold and compare

    For each part in the range we agree what a guest should hold, compare and have fitted. Your technical person writes the points. What exists afterwards is a demonstration brief that favours handling over slides, with the table, the part and the person who runs it. A card on each table says what to hold, what to ask and what to notice, so guests can try a part even when the host is busy elsewhere.

  3. 3

    Choose the venue and draw the floor

    We compare the plant, a hotel hall and a dealer's showroom against your guests and the demonstration needs. You decide where, and we draw the floor with tables, a fitting bay and a reception. Arrangements for chairs and food are made by the venue. Distances, parking and the route a guest takes from the door to the table are checked, since a confusing entrance spoils the first impression.

  4. 4

    Send invitations and keep the reply sheet

    Invitations go to the guest list by the channel each guest uses, with a clear request to confirm. We keep the reply sheet and chase politely. You decide who may bring a second person, and the sheet shows who is still undecided. Late replies are followed by a phone call from the area salesperson, because a personal call lifts attendance far more than another message does.

  5. 5

    Rehearse the run-sheet and test the capture

    Your speakers walk through the order of the day, and the lead capture form, on paper or in a tool, is tested with sample guests. Gaps are fixed. You confirm who stands at each table and who records orders and promises made. A short practice run with a colleague playing a sceptical dealer shows where the explanation of fitment is unclear and the table setup is awkward.

  6. 6

    Make the calls and read the orders afterwards

    After the event, the sales team works through the capture sheet, guest by guest, with the notes taken. We compare orders and stocking decisions with the figures noted beforehand. You decide which guests need a visit, and which launch lessons go into the next plan. Reasons are recorded for every guest who did not attend or order, so the next event can be planned from what these guests said and not from guesses.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do you arrange the hall, catering and stage?
No. We plan the sales side of the event: the guests, the demonstration, the capture and the follow-up. Venue, sound and catering are booked and paid by your event owner or an event company you choose.
Can the launch be held at our plant instead of a hotel?
Yes, and for a distributor it can be the stronger option because the line and the stores are visible. Check safety rules, visitor passes and insurance with your own plant and legal advisers beforehand.
Will you promise the event brings in new distributors?
No. An event gives the right people a first look and gives your team a reason to call. Whether a distributor stocks the range depends on your terms, stock and support, which we do not control.
How many guests is right for a launch?
A number your sales team can speak to properly. A useful test is that each guest has a real conversation with a named salesperson, and the demonstration table is never crowded. We set the number with you from your team size and the space, and we prefer a shorter list of buyers who stock parts over a long list of acquaintances. A smaller event with a full day of conversation is better for the order book than a crowded room where nobody speaks to anyone.
Should we invite dealers who also stock a rival brand?
Yes, if they are buyers you want to win, because a dealer who stocks two brands is deciding between them. Plan the table and the conversation around what makes your part easier to sell and to fit. We do not write remarks about rival brands, and we keep the invitation friendly and factual. Hosting them costs little and tells you why they chose the other brand, which is useful to hear; you decide who from your team speaks to them.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.