Skip to content
GullySales

CNC machining companies · Pricing strategy

Every quote should say what the part costs and what the price includes.

Pricing and packaging strategy for a CNC shop sets how a part is priced, what each quote includes and who may approve a discount. GullySales reviews your machine-hour costs and past quotes, builds a written rate structure with clear quote boundaries, and prepares the rules your estimators use so two people price the same drawing the same way.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What pricing strategy means

Pricing strategy is setting what to charge based on what competitors charge, what the market will pay and what margin the business needs. It is not a round number picked once and left unchanged. GullySales reviews this against competitor pricing and how prospects react to your current quotes.

Last updated 14 Nov 2026.

For CNC machining companies

Where it usually goes wrong, and what we would do.

  • “Two estimators price the same drawing differently”

    A buyer sends one drawing to the shop, and the shop quotes it twice because two estimators handle different inboxes. One uses a machine rate from last season, the other rounds up to be safe. The buyer sees the gap and wonders which is real. A shop that cannot explain its own number loses the buyer's trust before the negotiation starts.

  • “The quote leaves out the work around the cutting”

    Programming time, fixtures, first-article inspection, material certificates, deburring, plating and packing all cost money. When a quote covers only the cutting time, the shop absorbs the rest and finds out after the job ships. The margin looked healthy on the quote and disappeared on the floor, and nobody can point to the line where it went.

  • “Quantity breaks are set by habit”

    A prototype of one piece and a batch of a thousand are priced from the same instinct, and the setup cost is spread without a rule. A buyer who asks for a second price at higher quantity gets a number that changes by guesswork. Written quantity bands let the estimator answer at once and let the owner see where the shop is losing money on setup.

  • “Rework and engineering changes become free by default”

    A buyer revises a drawing after the quote is accepted, and the estimator agrees to absorb it to keep the relationship. It happens again on the next order. Soon the shop is doing change work for nothing. A written package with stated limits on revisions and re-inspection gives the estimator a reason to ask for a fresh quote.

What we do

What we deliver for CNC machining companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Machine-hour and cost review

    A working sheet comparing your machine-hour costs, labour, tooling, material allowance and overheads against what you quoted and invoiced on selected past jobs. You check the cost assumptions and point out what is missing before any rate is proposed. The review shows where the shop made money and where it only kept busy.

    Result: Open the sheet and each selected job shows cost, quote and invoice side by side.

  2. Written rate structure

    A rate card stating how a part is priced: machine rate by machine type, programming and setup treatment, material handling, and quantity bands. It carries a version date and an approving owner. Estimators read it instead of remembering it, and a new estimator can price from day one.

    Result: The rate card shows a version date and the owner who approved it.

  3. Quote package definitions

    Named quote packages, such as prototype, repeat batch and certified aerospace-type work, each stating what is included: inspection level, certificates, finishing, packing and number of revisions. Add-ons are listed as separate lines, so the buyer sees what extra work costs before asking for it.

    Result: Each package lists what is included, what is excluded and what is charged separately.

  4. Discount authority table

    A written table showing the discount an estimator may offer, what the sales head approves and what only the owner can agree. Each level has a floor below which the shop does not quote. The table is checked against your costs, so the floor protects an actual margin.

    Result: Any discount request can be traced to a named approver and a recorded reason.

  5. Quote wording and terms note

    Standard wording for validity of the quote, material price movement, free-issue material, tolerance assumptions and payment terms. Your own adviser checks anything with legal effect. The note keeps the estimator from improvising terms in an email at the end of a long day.

    Result: Every quote carries the same assumptions and terms in the same words.

  6. Price-change record

    A simple log of each rate change, the date, the reason and who approved it. When a raw material price moves or a machine is added, the record shows what changed and why. The owner can answer a buyer's question about a revised rate without searching old messages.

    Result: Every rate change shows a date, a reason and an approver.

How the result is measured

  • Win rate at current pricing
  • Margin per sale
  • Quote to close ratio

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these CNC machining companies.

  • Job shops doing contract machining
  • Precision component manufacturers
  • Auto ancillary machining suppliers
  • Aerospace and defence component machinists
  • Machine shops serving medical device makers
  • Prototype and low-volume machining shops
  • Sheet metal and fabrication shops with CNC capability
  • Export-focused precision machining units

Before you decide

Agree the work. Know how to judge it.

Pricing and packaging strategy for CNC machining companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring the current offer, delivery costs, and examples of discount requests or lost proposals. Separate a buyer who cannot afford the offer from one who does not understand what is included.

Make the scope clear

Agree which products or packages are being reviewed and who can approve price changes. Make assumptions about volume, delivery effort, and support visible in the model.

Check the work in use

Compare the proposed package with a real buyer requirement and the cost of fulfilling it. Check whether exclusions and optional work are understandable before testing a change.

Know when to change course

If a lower price creates more work than the business can support, revisit the scope. A higher conversion rate can still produce a worse commercial result.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from CNC machining companies. Anything missing is noted in the written scope, with who will supply it.

The cost records behind recent jobs
Machine hours, material purchase, outside processing and invoice values for a sample of past jobs. Without them, any rate we draft rests on opinion, and the first buyer who pushes back will expose it. If the records are incomplete, we say which figures are estimates and ask you to confirm them.
A set of drawings you remember well
Bring wins, losses and a few jobs that surprised you. Pricing rules are only believable once they have been tested against parts your estimators know. If this is missing, the rules look correct on paper and fail on the first awkward drawing.
Your current price lists and quote templates
Bring whatever your estimators use today, even if it is an old sheet or an email that gets copied. We read it to find which assumptions are already in use and which are carried by habit. Missing templates mean we start from your invoices and say so.
The discount history
Notes or emails showing who asked for a discount, who approved it and what was agreed. This tells us where the limits really sit today and who the buyers are that negotiate hardest. Without it, the discount table is written from assumption and may not match how the shop behaves.
A decision on who approves a rate
Name the person who signs off the rate card and the discount table. If approval sits with the owner and the owner is travelling, rules go stale and estimators return to guessing. One agreed approver, with a stated stand-in, keeps the structure alive.

How it works

How the pricing strategy work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Collect the quotes, invoices and cost records

    We ask for a selection of past drawings with the quote, the final invoice and whatever job cost you hold. The selection should include wins, losses and jobs you remember as painful. These records show how the shop prices in practice, which differs from how the owner believes it prices.

  2. 2

    Record the baseline before changing a rate

    Before proposing anything, we write down the current quote-to-order ratio by job type, the typical discount asked and the jobs that lost money, using your own figures. This baseline is the standard we read the result against at the end, so the work is measured and not remembered.

  3. 3

    Rebuild the cost of a machine hour

    With your estimator and the owner we work through each machine type: purchase cost, tooling, operator time, power, maintenance and floor space. You supply the figures and we check that they add up. We do not invent costs. Where a figure is unknown, we mark it and agree how to estimate it.

  4. 4

    Draft the rate structure and quote packages

    From the cost work we draft the rate card, the quantity bands and the quote packages, including what each package includes and what is charged as an add-on. You review each line against real drawings from your own folder, and we adjust where a line would have mispriced a job you know well.

  5. 5

    Set discount limits and quote wording

    We write the discount authority table and the standard quote wording with your sales head. The limits reflect the floor the cost work supports. Anything touching contract terms goes to your own adviser. We then walk the estimators through three or four live drawings to check that the rules produce one answer.

  6. 6

    Read the new quotes against the baseline

    After the rules have been used on real quotes for a period you choose, we compare quote-to-order ratio, discount given and margin on invoiced jobs with the baseline. We report what moved, what did not and where the rules need adjusting. The decision on further changes stays with you.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Will you tell me what price to charge?
We build the structure with you from your own costs and your own quote history; we do not set a price from outside. The rate card shows how each number is reached, so you can defend it to a buyer. The commercial decision on where to price stays with you and your sales head.
Does this help me win more RFQs?
We do not promise more orders. A clear rate structure and consistent quotes let your estimators reply with confidence and let you see where discounts are leaking. Whether that lifts your quote-to-order ratio is read against the baseline figures once the rules have been used on real drawings.
What counts as a package in a machine shop?
A package is a stated bundle of what a quote covers: inspection level, certificates, finishing, packing and revisions. A prototype package and a repeat-batch package look different. Writing them down means the buyer knows what the price buys and the estimator knows what is chargeable as an add-on.
Can you price export work?
Yes, the same structure applies, with extra lines for documentation, packing standards and freight terms. Tax, duty and customs treatment belong with your own adviser. We keep those lines clearly marked so your adviser can confirm them, and your quote never carries a figure nobody has checked.
What if my buyers always ask for a discount?
The discount table gives your estimator a floor and a ladder: what can be offered at once, what needs the sales head and what needs you. It also records the reason each time. Over a few weeks you can see which buyers push and which ask for something else, such as faster delivery or payment terms.
Who keeps the rate card up to date?
You do, through the price-change record. We leave a short note on how to update the rate card when a material price moves or a machine is added. The structure is written so your own team can maintain it without us, and we are available if you ask for a review later.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.