Skip to content
GullySales

Electronic component manufacturers · CRM

Record every sample, every design-in and every approval against the engineer who asked.

A CRM for a component maker holds the engineers, projects, samples and approvals that link a first enquiry to a scheduled order. GullySales sets up the fields, stages and habits so that your sales team records what a design-in actually needs.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A distributor shows electronic components to a customer

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For electronic component manufacturers

Where it usually goes wrong, and what we would do.

  • “The project, not the company, is the unit”

    One customer may run several boards, each with its own engineer and part. A record kept only by company hides which project a sample belongs to and which one has stalled.

  • “Sample dispatch is the event worth logging”

    A posted sample is a cost and a promise. If the CRM does not hold the part, quantity, date and recipient, nobody can ask later whether the engineer built it into a board.

  • “Distributor and direct paths overlap”

    The same end customer may buy through a counter and ask your team for a quote. The CRM needs a field for channel, so you can see the overlap before it becomes a dispute.

  • “Approval status changes the next step”

    A vendor in evaluation, one on a trial order and one fully approved need different conversations. A stage list that mirrors those steps keeps the follow-up honest.

What we do

What we deliver for electronic component manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Field and stage design

    Fields for part family, project, sample, qualification and channel, with stages from enquiry to scheduled order.

    Result: Everyone logs the same facts in the same place.

  2. Sample tracking sheet

    A record linking each sample to a person, a project and a follow-up date.

    Result: No sample leaves without a note of what comes next.

  3. Import of existing contacts

    Contacts from spreadsheets, email and exhibition cards cleaned and loaded.

    Result: One list replaces the scattered ones.

  4. Channel flag and ownership rule

    A field showing direct or distributor, with a written rule on who owns the account.

    Result: Overlaps are visible and can be settled by the rule.

  5. Team habit guide

    A short page on what to log after each call and visit.

    Result: The CRM reflects what happened on the road.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep the part, the stage of design-in and the approval on one record.

Part number and family
Entered from the sample request by the application team, so the record shows exactly what the engineer is evaluating.
Design-in stage
Sample sent, tested, approved for prototype or in production. Updated after each call, it tells the sales team what to ask next.
Approved vendor status
Set by the quality contact once the audit passes. It changes the next step from sample support to scheduled order.
Channel flag and owner
Direct or distributor, with the owner named. It stops two people from calling the same engineer about the same part.
Expected annual quantity
The volume the buyer states, entered as their words, which helps the team judge the size of the opportunity.

Who it is for

This is written for these electronic component manufacturers.

  • Capacitor and resistor makers
  • Connector, terminal and cable assembly makers
  • Transformer, inductor and magnetics makers
  • Relay, switch and contactor makers
  • Crystal, oscillator and filter makers
  • Sensor and thermistor element makers
  • Fuse, surge protection and circuit protection component makers
  • Semiconductor packaging and assembly units

Before you decide

When this may not be the right fit.

  • Your sample dispatches are not logged anywhere today, so a system would hold nothing about your most useful event.
  • The sales team has not agreed who owns an engineer reached both directly and through a distributor.
  • You want the CRM to run the plant orders, which your ERP already does.

Before you decide

Agree the work. Know how to judge it.

CRM for electronic component makers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electronic component manufacturers. Anything missing is noted in the written scope, with who will supply it.

The contact list from every source
Spreadsheets, exhibition cards, email contacts and the sales engineers' phones, brought together in any state. Duplicates are acceptable. Without it, the record starts empty and past enquiries are lost. Names in the wrong spelling or with missing company names are acceptable, and we help clean them during the import.
The sample register and open quotes
Records of samples sent and quotes pending, with the recipient and part. They become the first projects. If kept only in emails, someone must list them before import.
A statement of your approval stages
How you define sample sent, under evaluation, approved vendor and scheduled order. The stages follow it. Where definitions differ between salespeople, the sales head must settle them first. A one-page note from the sales head is enough, and we turn it into the stage list with them.
Your existing ERP customer codes
The account codes your finance or ERP uses, so the CRM and the books name the same customer in the same way. If they differ, links between order and project are made by hand. A printed customer list from the ERP is acceptable if no export is available.
Two salespeople for the trial
Two members of the sales team willing to use the record on live projects and report what fails. Without them, the first version meets resistance. If none is willing, the sales head is the trial user.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Map one design-in from enquiry to scheduled order

    We take a recent project and trace it through every stage: the first enquiry, the sample, the evaluation, the approval, the first order and the schedule. You tell us who handled each step. The map shows what the record must hold and where the trail used to break. We also note where a salesperson kept private notes, because those are the first places to be copied into the shared record.

  2. 2

    Define the project as the unit of record

    We set up the CRM around the project and the engineer, with the company as a header, since a single account may hold several projects at different stages. You approve the fields, such as application, part family and expected volume. A project holds its sample records, its quotes and the engineer's stated dates, so one screen tells the next salesperson where things stand without a phone call.

  3. 3

    Load contacts, samples and open quotes

    We import the existing contacts, the sample register and the open quotes, matching each sample to a project. Your sales engineers confirm the matches. What exists afterwards is a record where a sample is attached to a person and a purpose.

  4. 4

    Add the channel flag and the ownership rule

    Every project is marked direct or distributor, and we write the rule for who owns it when both are involved. The sales head approves the rule before it is entered. We also add a field for the approval status held by the customer's quality team, because that status changes the next step more than any other fact.

  5. 5

    Test the stages with your sales team

    We ask two or three salespeople to move real projects through the stages and note where a field is confusing or a stage is missing. We adjust the layout so the record takes less time than the memory it replaces. We ask them to enter a real sample dispatch from the same morning, to see whether the form can be completed at a desk in a few quiet minutes.

  6. 6

    Read the pipeline against last season's orders

    After the record has been used, we compare the projects at each stage with the sample register and order book we read at the start. You decide what to report to management and which fields to simplify. We also list the fields nobody filled in, and remove them so the record stays light enough to use on a busy afternoon.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should a component maker choose?
The one your team will actually fill. We look at your size and habits first, then suggest a tool in ordinary use in India. The fields matter more than the brand.
Can the CRM link to our ERP?
The order data lives in the ERP and the pre-order story in the CRM. We keep them separate to start, and link them only where the same customer code can be matched reliably.
What will the sales team resist?
Logging after a long day. We keep the form short and make sure the data is used in the review, so the effort is seen to matter.
What will the sales team resist?
Entering data that gives them nothing back. If a record shows the sample date, the engineer and the next call at a glance, they will use it. Keep the fields to those that prompt a call, and drop any that exist only for a report.
Do we need to link the CRM to the ERP on day one?
No. Start with the CRM holding projects, samples and approvals, and with the order data entered or imported by hand where needed. A link to the ERP is useful for comparing forecast and actual orders, but it is a second step, and it works only if customer codes and part numbers match in both systems. We list the fields that must match and note the gaps. You decide whether the link is worth building once the sales team uses the record without prompting.
What if distributors refuse to share their end-customer names?
Record what they do share, such as the application and the stage, and mark the end customer as unknown. Do not make the distributor's cooperation a condition of using the record. Over time, sample requests and technical calls reveal the customer, and the sales engineer can add it. You may also agree with the distributor a simple outcome report. We write the field so that an unknown end customer is visible, which reminds the team to ask without blocking the work.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.