Skip to content
GullySales

Industrial equipment manufacturers · Sales competency assessment

Find out which sales engineers can run a technical discussion alone.

Sales competency assessment for an equipment maker checks each salesperson against the skills the role needs, using role plays, reviewed calls and quotation follow-ups, manager observation and a self-rating. GullySales writes the competency list, runs or trains your managers to run the exercises and gives you a gap sheet for each person.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

An assessor observes trainees practising a buyer conversation

What sales competency assessment means

Sales competency assessment checks each salesperson against the skills their role needs, using role plays, reviewed calls, manager observation and a self-assessment. GullySales writes the competency list, runs or trains your managers to run the exercises, and gives you a gap sheet for every person.

Last updated 14 Nov 2026.

For industrial equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “Technical depth and selling skill are different”

    A sales engineer who knows the machine thoroughly may never ask the buyer about budget approval or who signs the purchase order. Another who builds rapport easily may stumble on a duty-cycle question. Rating the two skills apart shows which gap to close for whom.

  • “The best performer's method is not written down”

    The senior who wins the complex orders does certain things on a plant visit that nobody has listed. Turning those behaviours into a competency list, checked against the senior's actual work, gives the rest of the team something concrete to be rated against.

  • “Managers rate the people they like”

    Without a rating guide, a manager scores the warm, punctual rep higher than the quiet one who closes more. A guide that describes weak, acceptable and strong work in a real RFQ situation moves the conversation from impression to evidence.

  • “Self-ratings expose a different gap”

    A rep who rates themselves strong on negotiation and is observed as weak needs different help from one who rates themselves weak and is observed as strong. Recording both side by side tells the manager whether to coach skill or confidence.

What we do

What we deliver for industrial equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Role competency list

    The skills each role needs, written as things a person does on a call, plant visit or quotation follow-up. You approve it against your best performers' work before anyone is assessed.

    Result: Reps know what they are being rated on before the exercise.

  2. Rating guide with sample behaviour

    For each competency, a plain description of weak, acceptable and strong work, with an example drawn from your own selling situations.

    Result: Two raters can arrive at the same score for the same call.

  3. Role-play scripts for equipment sales

    Fixed buyer scenarios, such as a procurement head pressing for a lower price on a machine or a maintenance lead doubting the spares supply. Every rep gets the same one.

    Result: Scores are comparable because the situation was the same.

  4. Call and quotation follow-up review sheet

    A form for reviewing recorded calls, WhatsApp threads and quotation follow-up messages, where each rating points to a line in the conversation.

    Result: A rating can be traced to what was said.

  5. Manager observation form

    A short sheet completed after sitting in on a plant visit or demo, recording what was seen separately from what the manager assumes.

    Result: Feedback rests on observed behaviour.

  6. Gap sheet for each person

    One page per salesperson showing competencies rated, the gaps and the first piece of coaching or training suggested, with the manager's agreement.

    Result: Each rep leaves with a specific next step.

How the result is measured

  • Competencies rated with supporting evidence per rep
  • Agreement between independent assessors
  • Gap between self-rating and observed rating

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these industrial equipment manufacturers.

  • CNC machine and precision equipment manufacturers
  • Industrial pump and compressor manufacturers
  • Packaging machinery manufacturers
  • Conveyor and material handling equipment makers
  • Motor and drive manufacturers
  • Custom fabrication and job-work manufacturers
  • Export-oriented industrial equipment makers
  • Spare parts and after-sales service providers

Before you decide

Agree the work. Know how to judge it.

Sales competency assessment for industrial equipment manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring real questions, objections, and call examples that the team finds difficult. Agree which selling behaviour needs to change and how it will be observed at work.

Make the scope clear

Choose the roles and situations to practise. Separate a training session from coaching, manager follow-up, and any scripts or reference material to be produced.

Check the work in use

Use a realistic practice conversation, then review the same skill in live work with appropriate permission. Look for a change in behaviour before attributing a sales result to training.

Know when to change course

If the problem is an unclear offer, missing product knowledge, or no permission to make a decision, fix that first. A communication workshop cannot remove those barriers.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

Job descriptions and any existing ratings
These tell us what is already expected. Even a draft helps, as does any appraisal form your company already uses. If none exist, the competency list is built from conversation alone and is checked with the owner before any seller is assessed.
Recent quotations from strong and weak performers
Real quotations show how skill appears on paper. Bring a few from the strongest and weakest sellers, with names removed. Without them, the rating guide has no sample behaviour.
The managers' time to observe and score
Observation cannot be done by us alone. Managers must watch role-plays and calls and fill the form. If they are unavailable, the assessment rests on the role-play only and is limited.
A statement of how the results will be used
Tell the team in writing what the assessment is for: development, hiring or promotion. The owner decides. If the statement is vague, sellers will treat the exercise as a test of their jobs and perform accordingly, and the evidence will show defensiveness rather than skill. The owner should also say who will see each gap sheet.
Sellers' agreement to be assessed
Each seller should know what is happening and agree to take part. If someone refuses, the owner decides what follows. We do not assess anyone against their will, and a seller who takes part may see their own sheet first and comment on it before the manager files it.

How it works

How the sales competency assessment work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read what the role really asks for

    We start with your job descriptions, if they exist, and then talk to the sales head and two senior sellers about what the role truly demands. We read the quotations of your best and weakest recent orders. The aim is a short list of competencies that matter for selling your machines, each described in terms of behaviour, not personality. Technical depth is rated apart from selling skill, because an engineer who knows every parameter may still not ask what the buyer needs, and a persuasive caller may not know the machine.

  2. 2

    Agree the rating guide with the sales head

    For every competency we write what poor, adequate and strong look like, with an example from a real call or quotation. The sales head reviews and signs the rating guide. If two managers read an example differently, we reword it until they agree. We also write what each rating would look like in a quotation follow-up, such as whether the seller asked why the buyer went quiet or only asked whether the quotation had been read.

  3. 3

    Prepare the role-plays and review sheets

    We write role-play scripts for equipment sales: a first call from a plant engineer, a price challenge from a purchase head, a revised specification. We also prepare the sheet for reviewing a real call and the follow-up of a past quotation. Your design engineer checks the technical content, so that no seller is marked down for an answer the script got wrong. The scripts are performed with a colleague playing the buyer, and the observer scores only what the rating guide lists.

  4. 4

    Collect evidence from several sources

    For each seller we gather a role-play, a reviewed call or quotation, the manager's observation form and a self-rating. No single source decides. We run the exercises at a time that does not interrupt live enquiries, and tell the team how the evidence will be used. The manager's form is filled during a real quotation review or a ride-along, not afterwards from memory, and the seller's self-rating is done before the manager's view is shared.

  5. 5

    Score and compare the evidence

    We score each piece of evidence against the rating guide and set the four sources side by side. Where the manager's view and the self-rating differ, we note it as a finding, not a verdict. The scoring is explained to the sales head, who sees the evidence behind every mark. A mark with thin evidence is labelled so, and we do not average a strong role-play with a weak quotation into a number that hides both. Differences between two scorers are discussed before the sheet is closed.

  6. 6

    Hold the feedback conversation and fix the gaps

    We prepare the manager for a conversation with each seller, built on the gap sheet: what was observed, what was strong and what to work on. The manager leads and we advise. Together they choose one or two gaps to address, such as asking about the buyer's present line or stating the exclusions in a quotation. The seller writes the plan in their own words, and the sheet is filed for the next review so that progress can be read against it.

Proof

Published examples of our work.

Real clients and the work recorded for each engagement. These examples may cover related services or industries. They show the method, not a guaranteed result.

All case studies
  • Burhani Hydroline

    Situation
    The website was dated. Menus were hard to follow, pages were slow, and it did not work properly on a phone, which is where a buyer looks first.
    What we did
    • Research before design
    • Wireframes and prototypes
    • The full product catalogue
    • An online checkout
    Result
    No numbers were recorded for this engagement. The work is described in full in the case study.
    Read the case study

Also worked with

Chord Road Hospital · Curtain Label · Difesa Security Services · Felicity Inn · Hands On CSR · Implevista · Kambar Group · Kalessi · Kerur Pain Clinic · LL Trust · Lucky Deals · Natural Gases · NavaShakthi Souhardha · NewCom Logistics · Proton Technical Services · SB Engineering · Shakthi Foundation · Shakthi Group · Urbanest · Insyde Studio · Venkateshwara Laser Tech · Vivara Studios

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is this used to decide who stays in the team?
No. It is a development tool, and the briefing says so. If an owner wants a score to justify letting someone go, this service is not built for that, and using it that way damages trust in the exercise.
Can it be used when hiring new sales engineers?
This service assesses people already in your team. Checking outside candidates is a different task that belongs to recruitment and candidate assessment, though the competency list can inform what you look for.
Do the exercises take reps away from selling?
They take some time, which is the cost of finding the gap. GullySales plans them with your sales head around the plant visits and dealer calls already in the diary, and the owner decides when they run.
Can the same assessment be used on a candidate we are hiring?
Parts of it can: the role-plays and the review of a sample quotation suit a candidate interview. The self-rating and the manager observation need time in the job. We would adapt the sheets for hiring, with your adviser's view on how candidate assessments should be kept and recorded.
How do we compare a field engineer and an inside salesperson fairly?
We do not rank them against each other. The competency list has a shared core and a part for each role, and each person is rated against their own role. The gap sheet shows distance from the standard for that role, which is a fairer comparison than a single score for people doing different work.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.