Skip to content
GullySales

Industrial equipment manufacturers · Sales profitability analysis

Find out which machines, customers and orders actually leave money after the discount.

Sales profitability analysis for an equipment manufacturer means working out, order by order, what is left of the invoice after the discount, the commissioning visit, the warranty claim and the months of credit. GullySales works from your own accounts and writes a plain report on where the margin stays and where it leaks.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

An analyst compares customer invoices, returns and freight costs

What sales profitability analysis means

Sales profitability analysis shows which products, customers, regions and salespeople leave profit after discounts, credit, returns and the cost of serving them. GullySales works from your own accounts, order by order, and gives you a plain-language report on where the money stays and where it leaks.

Last updated 14 Nov 2026.

For industrial equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “The quoted price is not the margin”

    A press, pump or conveyor line is sold against a costed bill of materials, but the order is closed after negotiation. By the time freight, packing, erection and the free first set of spares are added, the margin on the final order may bear little resemblance to the margin on the quotation sheet.

  • “Standard machines and special builds hide inside one average”

    A manufacturer that sells a catalogue model and also takes one-off special orders sees a single blended figure. The special build that took the design office three extra weeks looks as healthy as the repeat model on the shop floor, so nobody learns which one pays.

  • “Service work is counted as goodwill, not cost”

    Visits to restart a stopped line, spares sent without charge and warranty replacements are paid for by the factory but rarely booked to the customer. A buyer who rings the service desk every month may be the least profitable account on the list.

  • “A large customer can be a slow-paying customer”

    The big plant that places the largest orders may also hold the payment for months and ask for a retention amount against performance. The cash tied up and the interest paid on borrowing never appear against that account in a sales report.

What we do

What we deliver for industrial equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Order-level margin workbook

    Each invoice joined to its cost from your books, with the discount given and any credit note raised, so a row can be traced back to its voucher.

    Result: Your accountant can open any row and find the voucher behind it.

  2. Machine and variant comparison

    Standard models, modified models and special builds shown separately, with the design and trial effort noted beside each.

    Result: You can see whether special builds are priced to cover their extra effort.

  3. Customer and sector view

    The same orders grouped by customer, by buying sector and by region, with the size and mix of each group stated beside the comparison.

    Result: You can say which sectors you serve at a profit and which you serve for the name.

  4. Retention, credit and service note

    Payment days, retention amounts held and the service visits and free spares sent, listed account by account and labelled by source.

    Result: Cash tied up and service cost sit next to margin, not outside it.

  5. Definitions sheet

    How cost, returns, warranty and shared overheads were treated, written in plain words and approved by you before any ranking is shown.

    Result: The owner and the accountant have agreed the rules before the numbers are read.

  6. Plain-language findings report

    A written summary of where the money stays and where it leaks, with the orders that could not be reconciled listed for your accountant.

    Result: You get a clear list of accounts and models to look at first.

How the result is measured

  • Margin by order, product, customer, region and salesperson
  • Discount given against list price, by account
  • Credit days taken and cash tied up in receivables

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these industrial equipment manufacturers.

  • CNC machine and precision equipment manufacturers
  • Industrial pump and compressor manufacturers
  • Packaging machinery manufacturers
  • Conveyor and material handling equipment makers
  • Motor and drive manufacturers
  • Custom fabrication and job-work manufacturers
  • Export-oriented industrial equipment makers
  • Spare parts and after-sales service providers

Before you decide

Agree the work. Know how to judge it.

Sales profitability analysis for industrial equipment manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring the current target, pipeline, and review format. Mark which decisions the manager can make and which still require the owner's approval.

Make the scope clear

Agree decision rights and the management routine, including who runs it after the engagement. Separate advice to your sales head from taking responsibility for an agreed part of the operation.

Check the work in use

A useful review ends with an owner and next action for the deals or constraints discussed. Revisit those actions before adding more dashboard measures.

Know when to change course

If a review only collects updates already available in the CRM, shorten it. Use the time to resolve a blocked decision or coach a specific piece of selling work.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

Invoices and payment records for the sample orders
The analysis needs the invoice and the receipts for each order. A varied set of recent orders is best. Where payment is incomplete, include the schedule.
Costing from the works office
The cost of a machine sits with the works office or the accounts team. Bring the costing sheets or the method used, and say whether overheads are added to the cost of an order or kept separate. Without them, margin is shown as price less direct costs only, and marked.
Records of commissioning and warranty visits
Service jobs after a sale carry cost. Bring the visit records for the sample orders, with parts used and the engineer's time. If none were kept, we ask the service head for estimates and mark every figure that rests on one.
A list of discounts and concessions given
The difference between the quotation and the invoice shows the concession. If a register exists, bring it. Otherwise we rebuild the list from the quotations and invoices, which takes longer and cannot show a concession agreed on the phone and never written down.
An accounts head who can answer questions
Questions about how a cost was booked arise at every step. The accounts head must be reachable. Without that, the definitions stay unsettled and the report is delayed, or it is issued with a note listing every figure that rests on an assumption.

How it works

How the sales profitability analysis work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Decide the questions the report must answer

    With the owner and the accounts head we write the questions: which machines earn well, which customers cost more than they bring, whether service is a cost or a profit. We then list the records that can answer them. Questions that your records cannot answer are stated at the start, so the owner does not expect a figure that the books cannot supply. We also ask what decision each answer would change, which keeps the report to what you will use.

  2. 2

    Take an export of orders and test it

    Your accounts team exports a spread of orders with the invoice, discount, freight, installation, warranty and payment records. We test a few against the original documents. If the export is wrong, we correct the method, not the numbers, and the accounts head confirms. Orders that straddle two accounting periods, or were invoiced in stages, are matched by the order number so that nothing is counted twice.

  3. 3

    Agree the definitions in a short sheet

    We write what counts as the order value, the cost of the machine, the commissioning visit, the warranty claim and the cost of credit. The works office and the accounts team both sign. The sheet is why two people reading the same report get the same answer. It also records the choices that could have gone another way, such as whether a free commissioning visit is charged to the order or to the sales budget, so the report can be re-run on a different basis if you prefer.

  4. 4

    Build the order-level margin view

    For each order, we show what was invoiced, what was given away and what it cost to deliver and support. Standard machines and special builds are shown apart, as are domestic and export orders. The accounts head reads each line against the file. A machine that looks profitable only because its warranty claim has not yet arrived is marked as provisional, and we list the orders still inside their warranty.

  5. 5

    Add credit, service and cost to serve

    We add the cost of waiting for payment, the free service visits and the extra work for large customers. A customer who orders large machines but pays slowly and asks for repeated visits may earn less than one who orders less. These lines are marked as estimates where records are thin.

  6. 6

    Walk through the findings with you

    We read the report with the owner, the sales head and the accounts head, in plain words, order by order where needed. Each finding states the evidence and its limit. You decide what to act on, and we leave the workbook and the definitions sheet with the accounts head. The report does not name a price to quote next time; it shows where the last prices left margin and where they did not, which is the evidence the owner needs for that decision.

Proof

Published examples of our work.

Real clients and the work recorded for each engagement. These examples may cover related services or industries. They show the method, not a guaranteed result.

All case studies
  • Burhani Hydroline

    Situation
    The website was dated. Menus were hard to follow, pages were slow, and it did not work properly on a phone, which is where a buyer looks first.
    What we did
    • Research before design
    • Wireframes and prototypes
    • The full product catalogue
    • An online checkout
    Result
    No numbers were recorded for this engagement. The work is described in full in the case study.
    Read the case study

Also worked with

Chord Road Hospital · Curtain Label · Difesa Security Services · Felicity Inn · Hands On CSR · Implevista · Kambar Group · Kalessi · Kerur Pain Clinic · LL Trust · Lucky Deals · Natural Gases · NavaShakthi Souhardha · NewCom Logistics · Proton Technical Services · SB Engineering · Shakthi Foundation · Shakthi Group · Urbanest · Insyde Studio · Venkateshwara Laser Tech · Vivara Studios

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Our costing is done by the works office, not the accounts team. Does that matter?
It matters for where the cost figures come from. We use whichever record your accountant confirms as the reliable one and say so in the definitions sheet. Where the works costing and the books disagree, the difference is shown, not smoothed over.
Can this be done if a machine takes a long time to build and invoice?
Yes. Orders are followed from the quotation through to the final invoice and the last payment, so a long build is read as one order. Stage billing is matched to the stage costs your accounts team records.
Will this tell us what price to quote next time?
It shows where the past margin went, which is the evidence a price decision needs. Building a new price list is separate work. The decision on what to quote stays with you and your accountant.
How do we count service visits that were given free?
As a cost of the order that earned the goodwill. Each free visit is entered against the order and the customer, with the engineer's time and the parts used, even if you charge nothing. The report then shows what the machine really earned after service. Whether to keep giving free visits is your decision, now made with the figure in front of you.
Which orders do we include if the order book is large?
A spread chosen to answer your questions: standard and special machines, large and small customers, domestic and export. We do not need every order. We agree the sample with the accounts head and state its limits in the report, so you know what the findings can and cannot say about the whole book.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.
What if we are not happy with the work?
Tell us and the plan changes. Everything is reported against the baseline, so a number that is not moving is visible to both sides. The term is in your written scope, and the refund and cancellation policy sets out the rest.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.