Skip to content
GullySales

Industrial repair and maintenance companies · Referral marketing

Get introduced to the next plant by the maintenance head who trusts you.

Referral marketing for an industrial repair company means asking the people who already see your work, such as plant engineers, dealers and fellow vendors, to introduce you to the next plant. It is the strongest source in this trade, but it goes unrecorded. GullySales sets up the asking, the thanking and the record of who sent whom.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Maintenance technicians inspect a disconnected industrial motor

What referral marketing means

Referral marketing is asking an existing customer to recommend you to someone they know, usually with a reward for both sides. It differs from a loyalty scheme because it brings in a new customer rather than a repeat purchase. GullySales builds the ask and the reward into a point where a customer is already satisfied.

Last updated 14 Nov 2026.

For industrial repair and maintenance companies

Where it usually goes wrong, and what we would do.

  • “Engineers move between plants”

    A maintenance head who liked your repair joins another plant and does not know who to call there, because nobody told that person to.

  • “Dealers are asked and do not know your name”

    A dealer of pumps or compressors is asked who repairs them after warranty and recommends whoever was spoken to last.

  • “Referrals are thanked, not recorded”

    A job arrives with a name that is forgotten by next week, so the person who sent it is never recognised.

What we do

What we deliver for industrial repair and maintenance companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A referral source list

    A list of the plants, dealers, OEM service desks, estate association members and suppliers who have sent you work or could.

    Result: You know who to call first.

  2. A short ask after a good job

    A message sent to the maintenance head after a successful repair, asking if the contact knows another plant with a similar machine.

    Result: The request is made at the point of goodwill.

  3. A dealer and OEM contact plan

    A visit and a capability sheet for each dealer of the machines you repair, with a report back on every job they sent.

    Result: A dealer has your name ready when asked.

  4. A referral record

    A field on every enquiry for who sent it, so you can see which relationships bring work.

    Result: Your best referrers become visible.

  5. A thank-you routine within plant rules

    A call, a note or a service visit offered to referrers, with a rule that no payment goes to an employee of a plant.

    Result: Thanks are given without creating a problem for the plant.

How the result is measured

  • Referrals received
  • Referral conversion rate
  • Cost per referred customer

Recorded as a baseline before work starts, so every later report has an honest comparison.

How referrals work in this trade

Know who sends you plants, what makes them do it and what never to offer.

Maintenance heads and engineers you have served
Ask them, after a clean job, which other plant uses the same machine. Note their name and the plant they move to, since an engineer who changes jobs takes you along.
Machine dealers and OEM service desks
Give them a one-page capability sheet and tell them how each job went. A dealer who hears back keeps sending names; one who hears nothing stops.
Fellow vendors, such as spares suppliers and electricians
They see breakdowns you do not. Agree a simple exchange of names, record who sent what, and settle any commission in writing between businesses.
Industrial estate association members
Offer to speak briefly at a meeting about a common fault, such as motor failures after voltage dips. Note who asks for a visit afterward.
Your own technicians and drivers
They overhear plants discussing other machines. Give them a way to pass a name on and thank them when it becomes a job.
What never to do
Never pay or gift a plant's employee for an order or a referral, and never promise a result to win one. Check each plant's vendor rules.

Who it is for

This is written for these industrial repair and maintenance companies.

  • Electric motor rewinding and repair shops
  • Pump, gearbox and compressor overhaul workshops
  • Hydraulic and pneumatic repair companies
  • CNC and machine tool service companies
  • Electrical panel, drive and automation service teams
  • Diesel generator and transformer maintenance firms
  • Crane, hoist and material-handling service companies
  • Shutdown and plant maintenance contractors

Before you decide

When this may not be the right fit.

  • You have not yet done enough good work at any plant for an engineer to feel able to recommend you.
  • Plant rules forbid staff from accepting anything for a referral, and you would have no way to thank anyone within them.
  • Your job records are not kept, so you could not tell who was referred by whom or follow up a recommendation.

Before you decide

Agree the work. Know how to judge it.

Referral marketing for industrial repair and maintenance companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Review repeat orders, inactive customers, and reasons for leaving. Separate a normal buying interval from a customer who stopped because of an unresolved problem.

Make the scope clear

Choose the customer group and the reason to contact them. Agree how complaints, renewal decisions, and additional offers are handled, including when a sales message is inappropriate.

Check the work in use

Track the response through to a retained or repeat order, with discounts and service costs visible. Record why the customer returned rather than crediting every repeat purchase to the campaign.

Know when to change course

If customers leave because delivery is unreliable, fix that before offering a loyalty reward. Repeated promotions can hide the cause without improving the experience.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial repair and maintenance companies. Anything missing is noted in the written scope, with who will supply it.

Names of plant engineers who moved
List the engineers and managers who left plants where you worked and who now sit elsewhere, if you know. They are the warmest introductions you have. If you have none, we begin with dealers. Include the plant they moved to and the machine types there, since an introduction is easier when you can name what you could repair.
A dealer and OEM contact list
Bring the names of dealers, distributors and service desks you have dealt with. We plan visits from it. If a contact is unclear, note it so we do not approach someone with the wrong message.
A view on what you can offer in thanks
Decide what you are able to give: a visit, a priority slot, a free inspection. Each must be allowed by the receiver's rules. Where nothing is decided, we limit the plan to a thank-you call. A free inspection offered to a referred plant should be something the technicians have time for.
Your adviser's view on commissions
If you consider paying referral fees, check with your own adviser first. We do not set commission terms. Missing this, the plan avoids any payment and uses thanks and priority only.
The habit of asking how they found you
Whoever answers calls must agree to ask this each time and write the answer. Without it the record is blank. We prepare a one-line prompt for them.

How it works

How the referral marketing work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Name the people who already send work

    We go through your job cards and ask who recommended you: a plant engineer who moved, a dealer, an OEM service desk, a fellow workshop. The owner marks the ones that sent good jobs. This short list is the base, and no outside list is bought.

  2. 2

    Check what each source is allowed to take

    Plants have rules on gifts and commissions, and dealers have their own arrangements. Before any thank-you is planned, you tell us what each source can accept, and where you are unsure you ask the plant or your adviser. We then shape each source's thank-you and ask around what it can accept, and drop the source if the rule leaves nothing workable.

  3. 3

    Write the ask for after a good job

    With the technician who finished a job, we draft a short, honest request made once the machine is running and the maintenance head is satisfied. It names what you would value, such as an introduction to a sister plant. You decide who makes the ask and when.

  4. 4

    Plan the dealer and OEM conversations

    We prepare a one-page sheet of the machines you repair and the plants you cover, to leave with dealers and service desks. You decide who visits. The sheet says what you do and what you do not, so referred jobs fit your bench. The sheet is printed and also sent as a message, so a dealer can forward it to a customer who asks for a repairer.

  5. 5

    Set up the record of who sent whom

    A simple sheet or field in the enquiry record notes the referrer, the plant, the date and the job. The person who answers the phone asks every new caller how they found you. We test it with your next five real enquiries.

  6. 6

    Read referred jobs against all jobs

    We set the jobs that came through referrals against the earlier job cards and see which sources sent work worth keeping. You decide whom to thank, whom to visit again and which source to leave, using what the record shows.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 7, after the sale. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Can we pay a commission to a plant engineer who refers us?
Do not. Some plants prohibit staff from taking payments from vendors, and it can cost the engineer the job and you the account. Thank the engineer with a call or a clear, small, company-approved gesture.
Can we pay a dealer a commission?
A dealer is a business, so a written commission or margin agreement is possible. Put the terms on paper, and make sure the dealer's own supplier does not forbid it.
How do we track who sent whom?
Ask at the first call how they found you and write the name in the source field. Check it again when the quotation is sent, since the first answer is just the search they did last.
How often can we ask?
Ask after each completed job and once more after a repeat job. Asking on every call becomes a nuisance. If an engineer says no, note it and wait for the next good result.
Is it awkward to ask a plant for an introduction?
It is less awkward when the ask comes after a job that went well and is small and specific, such as naming one sister plant or one engineer who has the same machine. We help you word it so the maintenance head can decline without discomfort. Never ask during a dispute or while a quotation is open. If the plant has a rule against recommending vendors, we drop the ask and keep the relationship.
What if a referred plant turns out to be a poor payer?
Take the job on your normal terms and record the experience against the referrer. A referral does not oblige you to accept looser payment terms. The record lets you tell the referrer honestly that the plant was not a fit, and shows which sources send plants that pay. We set a simple check on credit before the first quotation for any new plant.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.