Skip to content
GullySales

Industrial repair and maintenance companies · Sales process

Move a plant from a breakdown call to a standing contract in clear steps.

A sales process for an industrial repair company is the set of steps from the first call to the job card, the quotation, the repair, the invoice and the contract. Each step has an owner and a note. GullySales writes your process in the words your team uses and checks that each step is recorded.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Maintenance technicians inspect a disconnected industrial motor

Plan the next part of the work

Last updated 21 Nov 2026.

For industrial repair and maintenance companies

Where it usually goes wrong, and what we would do.

  • “The visit and the quote are different people”

    The technician sees the fault, the owner prices it and the coordinator sends it, so details are lost between three people.

  • “The plant buys on price after approval”

    A purchase officer asks for a second quote after the maintenance head has already chosen you, and nobody is prepared for it.

  • “Nobody asks for the contract”

    A job ends with an invoice, and the offer of an AMC is left unsaid because nobody is assigned to say it.

What we do

What we deliver for industrial repair and maintenance companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A written process in your own terms

    One page listing the steps (call, visit, estimate, quotation, approval, repair, invoice, AMC offer) with who does each and what is written down.

    Result: A new coordinator can run the process from the page.

  2. An inspection and estimate format

    A standard sheet for the visit: machine, fault, cause, parts, labour, test and photographs, so the quotation is built from facts.

    Result: Quotations stop depending on what the technician remembers.

  3. Quotation templates with terms

    A clear quotation with scope, exclusions, spares, GST, payment terms and validity, in the format a plant's purchase department accepts.

    Result: A purchase officer finds the needed details without a call.

  4. A price-objection guide

    Written answers for the plant that has a lower quote, an approved vendor or a request to wait for the next budget.

    Result: The team answers calmly instead of discounting at once.

  5. AMC offer at job close

    A short offer attached to the completion report for any plant with other machines, with a call date set.

    Result: Each finished job opens the question of a contract.

How the result is measured

  • Enquiries with a named owner and next action
  • Opportunities meeting the stage evidence
  • Time waiting at each decision
  • Handovers returned for missing information

Recorded as a baseline before work starts, so every later report has an honest comparison.

Steps of a sale

Write each step the way your own team says it, and note what each one records.

Breakdown call
Take plant, machine, make, fault and whether the line is stopped. Name who is visiting and when, and send that on WhatsApp so the plant knows someone owns it.
Site inspection
Complete the inspection sheet with photographs of the fault and the nameplate. The quotation is built from this sheet, not from a phone call.
Estimate and quotation
Send scope, spares, labour, GST, payment terms and validity. Record the amount, the date and the follow-up date in the plant record.
Approval and purchase order
Ask who approves and whether a purchase order is needed before work. Starting without one can delay payment, so note the order number against the job.
Repair, test and handover
Complete the job card with work done, parts used and test result, signed by the plant's engineer. A signed card settles most disputes about the invoice.
Invoice and AMC offer
Send the invoice with the completion report, and make the AMC offer in the same message for plants with other machines. Log the reply and a call date.

Who it is for

This is written for these industrial repair and maintenance companies.

  • Electric motor rewinding and repair shops
  • Pump, gearbox and compressor overhaul workshops
  • Hydraulic and pneumatic repair companies
  • CNC and machine tool service companies
  • Electrical panel, drive and automation service teams
  • Diesel generator and transformer maintenance firms
  • Crane, hoist and material-handling service companies
  • Shutdown and plant maintenance contractors

Before you decide

When this may not be the right fit.

  • You win jobs through one engineer you know at a few plants, and a written process would not change who calls you.
  • Your quotes are different each time and no rate or terms are written, so there is no process to describe yet.
  • Only the owner quotes and the owner is unwilling to hand any step to another person, so a process would stay on paper.

Before you decide

Agree the work. Know how to judge it.

Sales process for industrial repair and maintenance companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring examples of deals that moved forward and deals that stalled. Record what the buyer had actually agreed at each stage rather than relying on the salesperson's confidence.

Make the scope clear

Define the entry and exit rule for each stage, the owner, and the document or decision that moves the deal. Agree how exceptions will be handled before rolling the process out.

Check the work in use

Take a live enquiry through the proposed stages with the team. Two people reviewing the same evidence should place it at the same stage and agree the next action.

Know when to change course

If a stage produces no useful decision or handover, remove it. The process should help someone do the next piece of work, not create administration for its own sake.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial repair and maintenance companies. Anything missing is noted in the written scope, with who will supply it.

Your last set of quotations
Bring a handful of quotations, won and lost, as they went to plants. We read the terms and the tone. If they are all in different formats, the first work is a single format. We look for the lines plants query closely, such as the parts allowance and the validity of the price, and build the terms around them.
The rule on price changes
Decide who may agree to a lower price and by how much, in your own words. A process with no limit invites the lowest bid every time. We write the rule into the price guide. The answer to a purchase officer who asks for a better rate should be the same whoever picks up the call.
A technician who inspects well
Choose the person whose inspections the others trust. The sheet follows how they work. If this person is overloaded, we plan the sheet from a short shadowing visit.
A sample AMC document
Hand over any maintenance contract you have used, even one from another company. We build the offer from it. Without a sample, we write a one-page scope that your adviser should read before use.
Agreement from the person who quotes
Whoever prepares quotations must agree to use the new sheet and format. If they are reluctant, say so now. A process that the estimator ignores gets bypassed within a fortnight of the first busy day.

How it works

How the sales process work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sit in on a real breakdown call

    We listen to how a breakdown call is handled, from the first question to the promise of a visit. We note what the caller asks and what your staff say. Nothing is scripted yet; this shows where the sale actually starts, which is before the quotation, in the questions asked of the caller.

  2. 2

    Write the stages in your own words

    From the calls and job cards, we draft the stages your jobs pass through, using your terms: enquiry, inspection, estimate, approval, repair, delivery, AMC offer. You change names and order until the team agrees it is how the work goes. The agreed list is then written out as the process your office and technicians follow, with the owner's name against each stage.

  3. 3

    Design the inspection and estimate sheet

    With the technician who inspects, we design one sheet that records the machine, the fault found, parts needed and the repair route. The estimator uses it to quote without calling back to ask. You decide which fields are compulsory before a quote may leave the office. The sheet is tested on two live inspections before it becomes the standard.

  4. 4

    Set the quotation terms and the price answers

    You and we write the terms your quotations carry and the replies to the usual price push from purchase officers. The replies state what the job includes, not a discount. The owner decides in advance how far a price may move and who may agree. The guide is kept to a single page, so the person on the phone can find the right answer while the purchase officer waits.

  5. 5

    Add the contract offer at job close

    We work out with you the moment, when the machine runs again, that the plant is asked about an AMC. The offer is a short page. A technician hands it to the maintenance head with the job card, and the sheet records the answer.

  6. 6

    Check stages against quotes won and lost

    After the team has used the process, we compare quotes sent, approvals received and AMC offers made against the figures recorded before. You see which stage loses the plant, and decide whether to change the sheet, the terms or who handles that step.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should the technician quote on site?
Give a rough range only if the fault is clear and the owner has set the rule. Written quotes should come from the office with the inspection sheet. A wrong figure given on site is hard to withdraw.
What do we do with a buyer who only asks for the lowest price?
Ask what is in the other quote: parts used, warranty, test and who does the work. If the plant still wants only price, quote clearly and move on. Do not cut a margin you cannot sustain.
When should we follow up a quotation?
Set the first call date when you send it, and agree it with the buyer: ask when the purchase decision will be made. Then call at that date and write what the buyer said.
Can we add a step for approved-vendor registration?
Yes. Add it as its own step with the papers the plant needs and a person who chases it. Registration takes several rounds, and without an owner it stalls.
Who should sign off the written process?
The owner and the person who prepares quotations should both sign it, because the owner sets the limits and the estimator lives by them. Technicians who inspect should see it and say where it does not match the work. A process the owner alone approves sits unused, so we hold a short walk-through with the whole team before it is final.
What if plants insist on their own purchase formats?
Some plants send a vendor format or a purchase portal. We keep your inspection sheet and your quotation as the working documents, and fill the plant's format from them. The sale itself does not change. The process marks which plants require their own format so the estimator knows to expect it and allows time for the form before the quotation goes out.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.