Skip to content
GullySales

Industrial repair and maintenance companies · Search engine optimisation

Show up when a plant searches for the machine that has just stopped.

SEO for an industrial repair company means building pages that answer the searches a maintenance head makes at a breakdown, such as gearbox repair or servo drive repair. A page for each machine and each industrial area decides whether a plant finds you. GullySales builds those pages and tracks which search brought which call.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Maintenance technicians inspect a disconnected industrial motor

Last updated 14 Nov 2026.

For industrial repair and maintenance companies

Where it usually goes wrong, and what we would do.

  • “The search names the machine and the fault”

    A maintenance head types screw compressor not loading or VFD error repair, not repair company. A page that lists only services cannot answer that.

  • “Plants choose by area”

    Buyers add Peenya, Bommasandra or Bhosari to the search because a technician must reach the plant that day. A page with no area is skipped.

  • “Make and model names carry weight”

    An engineer looks for the make the plant runs. A page that says which makes you have repaired earns a call a general page would not.

What we do

What we deliver for industrial repair and maintenance companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A page per machine type

    Separate pages for motors, pumps, gearboxes, compressors, hydraulic units and drives, each with common faults, what the repair involves and a call button.

    Result: A search for a specific machine reaches a page written for it.

  2. Pages by industrial area

    A page for each estate you can reach, naming the roads and the kinds of plants there, written from your own job records.

    Result: A search that includes your estate finds a page about it.

  3. A fault and symptom list for each machine

    Short entries such as motor tripping on overload or pump losing prime, each saying what to check and when to call you.

    Result: An engineer searching a symptom meets your name early.

  4. Make and brand coverage

    A list of makes you have serviced, taken only from your own job cards, shown on the relevant machine page.

    Result: A buyer sees that you have worked on that make.

  5. Search tracking tied to calls

    Call tracking and a source column on every enquiry, so you see which page produced which job card.

    Result: You know which machine pages are worth extending.

How the result is measured

  • Ranking positions
  • Organic traffic
  • Enquiries from organic search

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

These are the searches a plant makes, and the page that should answer each.

Machine and fault, such as servo motor not running
The engineer is at the machine. Send the engineer to a page for that motor type listing the faults you repair, the makes you handle and a number that rings at night.
Machine repair plus estate, such as gearbox repair Peenya
The plant needs a technician who can reach it. Write one page per estate you serve, with the roads, the machines you service there and your visiting hours.
Make and model, such as a named compressor brand overhaul
Add the brand to the machine page only if your technicians have serviced it. Match it to a job card so the page is not guesswork.
AMC and preventive maintenance for a plant
The searcher is a plant head or purchase officer. Give this its own page describing what an AMC visit covers, what the plant provides and what is out of scope.
Reconditioning versus replacing a machine part
Answer the question a purchase officer asks before approving a repair. A short page on when reconditioning makes sense earns trust before the first call.

Who it is for

This is written for these industrial repair and maintenance companies.

  • Electric motor rewinding and repair shops
  • Pump, gearbox and compressor overhaul workshops
  • Hydraulic and pneumatic repair companies
  • CNC and machine tool service companies
  • Electrical panel, drive and automation service teams
  • Diesel generator and transformer maintenance firms
  • Crane, hoist and material-handling service companies
  • Shutdown and plant maintenance contractors

Before you decide

When this may not be the right fit.

  • Your workshop cannot take a call on a stopped machine the same day, so pages that bring breakdown searches would collect calls you miss.
  • You repair only a few machines for two or three plants you already know, so search work would add visibility you do not need.
  • No one can photograph or write up a repaired machine, and pages with nothing true to show would match any workshop.

Before you decide

Agree the work. Know how to judge it.

SEO for industrial repair and maintenance companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring the pages for the products or services you want to sell, the search queries available in your reports, and examples of enquiries from search. Separate branded searches from buyers discovering you for the first time.

Make the scope clear

Agree which pages and technical fixes come first, who can publish changes, and who supplies subject knowledge. Link search work to a relevant enquiry route on each priority page.

Check the work in use

Follow the trail from a relevant query to its landing page and then to an enquiry. Review whether those enquiries fit your offer, alongside indexing and search visibility.

Know when to change course

A ranking movement alone is not a buying signal. If traffic grows but relevant enquiries do not, revisit page intent and the offer before producing more pages.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial repair and maintenance companies. Anything missing is noted in the written scope, with who will supply it.

Job cards for your last busy stretch
We need the cards or the register showing machine, make, fault and plant, even in handwriting. They show which repairs you actually do, so the pages follow your work and not a guess. Without them we plan from what the owner remembers, which favours the loudest jobs.
A technician who will read drafts
One person who does the repairs must be free to correct the fault wording and the list of makes. A page that a plant engineer finds wrong costs you the call. If nobody is free, we publish fewer pages rather than unchecked ones.
Access to the current website
We need login details for the site, its hosting and the domain, handed over by whoever bought them. In some shops the original developer still holds them. Without access we cannot add pages or tracking, and the plan shifts to a fresh site built beside the old one.
The list of estates you serve
Write down the industrial areas your van and your technicians reach, and the ones you want to reach. Pages by area only help where you will really attend the breakdown. Missing this, we limit pages to the workshop's own area and add the rest later.
Photographs from the bench
Gather pictures of repaired motors, rewound coils and overhauled gearboxes taken in your own workshop, with nameplates and plant names covered. Real bench photographs make a page credible to a maintenance head. Without them we use plain diagrams, which carry less trust.

How it works

How the search engine optimisation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List the machines your bench handles

    We start with your job card file and ask the workshop head to name the motors, gearboxes, drives and pumps that come in again and again, and the ones that earn the better work. You also tell us which makes you are happy to see and which you would turn away. This decides which machines get a page first and which wait.

  2. 2

    Collect the faults technicians describe aloud

    We sit with two or three technicians and write down the faults in the words they use on the shop floor: a motor that trips, a gearbox that whines, a drive that shows a fault code. Plant staff search in the same plain words, so these phrases become the questions each machine page answers.

  3. 3

    Check what a plant sees on Google now

    We search for your machines with the estate names added, the way a maintenance head would at a breakdown, and note who appears, which listings show and where your own site is missing. You tell us which of those rivals you actually meet at plants, so we do not chase names that do not matter.

  4. 4

    Write each machine page with a technician

    A technician reads every draft before it goes anywhere, correcting the fault descriptions, the makes and the parts you can really handle. We add photographs of your bench work where the plant has allowed it. You approve the wording on each page, and nothing is published until a person who does the repair has read it.

  5. 5

    Connect the pages to one tracked number

    Each machine page carries the same click-to-call button and a short enquiry form that asks for the machine, make and fault. We set the call tracking up with whoever answers your phone, and test it with a call from outside the workshop so the first real breakdown call is not the test.

  6. 6

    Read calls against the search record

    We take the call log and the job cards from the period before the work began and set them against the calls now traced to search, by machine type and estate. You see which pages brought calls that became job cards and which brought none, and decide together which machines get further pages.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How much of our work comes from search?
We do not know until we record it. Your baseline of enquiries by source is set before work starts, so you see what search brings against calls from existing plants and directories.
Should we write about every machine we can repair?
Start with the five or six where you win most jobs and have photographs. A thin page for a machine you rarely repair adds nothing. Add a page when a second enquiry for that machine arrives.
Do photographs of repaired machines help?
Yes, if the plant allows it. Photographs of the workshop, test bench and a stripped gearbox show what you do. Remove nameplates and anything that identifies the plant unless you have permission.
Who owns the website and the content?
You do. The domain and hosting should be in your name, and every page we write is yours to keep. Ask any vendor to confirm that in writing before they build.
Should the pages name the brands of machines we repair?
Yes, where you repair them and a technician has confirmed it. A maintenance head may search with the make and the model, so a page that names the brand can be found for that search. Listing makes you do not handle brings calls you must refuse, so we take the list from your job cards and have a technician sign it off. Brand names appear as plain text describing what you repair, and we do not suggest any link with the maker unless you are an authorised service partner and can show it.
What if a rival repair shop already ranks for our machines?
We still build the pages, because a rival's position does not close the search for you. We look at what their pages leave out: the fault descriptions, the estates, the makes, the photographs of real work. Your pages answer those gaps. We do not copy their wording, and we do not promise to pass them. The record of calls from search shows over time whether the pages are earning a place for your shop.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.