Skip to content
GullySales

Industrial repair and maintenance companies · Lead generation

Turn plants that have never called you into plants that call first.

Lead generation for an industrial repair company means bringing in enquiries from plants you do not yet serve, and recording where each one came from. It covers search, directories, dealers and estate visits. GullySales sets up each source, records every call and enquiry, and reports which source led to a job card.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Maintenance technicians inspect a disconnected industrial motor

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For industrial repair and maintenance companies

Where it usually goes wrong, and what we would do.

  • “Leads arrive as calls, not forms”

    A breakdown enquiry is a phone call or a WhatsApp message with a photograph, so a contact form on the website misses most of them.

  • “Estate visits are not logged”

    Technicians meet maintenance heads on jobs and hear about other machines, but nothing is written down, so the next lead is lost.

  • “IndiaMART enquiries go cold”

    A buyer posts a requirement for a pump repair and four suppliers reply. The one that replies with a clear message the same day gets the call.

What we do

What we deliver for industrial repair and maintenance companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. An enquiry source list

    A written list of every way a plant reaches you: phone, WhatsApp, IndiaMART, JustDial, dealer referral and technician visits, with who handles each.

    Result: No enquiry arrives at a place nobody watches.

  2. An enquiry record with machine and plant details

    One record per enquiry with plant, machine, make, fault, urgency and contact, created at the first call.

    Result: The technician arrives knowing the machine.

  3. A technician visit capture sheet

    A one-page sheet or WhatsApp form to note other machines, contacts and shutdown dates heard on a site, sent to the office the same evening.

    Result: Each job visit can open the next one.

  4. IndiaMART and directory reply templates

    Reply messages for repair enquiries that name the machine, ask two questions and offer a visit, kept ready for the person who replies.

    Result: Your reply reads as the one from a company that understands the fault.

  5. A target list of plants by estate

    A list of plants in the estates you serve, with machine types and a named contact where known, built from visits and public listings.

    Result: Outreach goes to plants that use what you repair.

  6. Source-to-job report

    A report from enquiry to job card to invoice by source, against your baseline.

    Result: You can stop paying for a source that brings only price checks.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

Where enquiries come from

Record these sources for every plant that reaches you, and reply the way each needs.

Breakdown phone call
Take plant, machine, fault, contact and whether the line is stopped. Confirm the visit on WhatsApp and note who took the call, so a missed number can be traced.
WhatsApp message with a photograph
Ask for the nameplate photograph and a video of the fault. Record it against the plant so the technician can prepare spares before the visit.
IndiaMART or JustDial enquiry
Reply with the machine type named and one question. Log the platform as the source, since these buyers send the same requirement to several repairers.
Dealer or OEM service desk referral
Write down the dealer and the machine. Report back on how the job went, since a dealer who hears nothing stops passing on names.
Technician visit or estate walk-in
Note the plant, the person met and the other machines the contact named. Put a call date in the record so the visit becomes a follow-up, not a memory.
Tender or vendor-registration enquiry
Log it with the due date and the papers asked for. Check the plant's or portal's current rules before replying, and keep your papers current.

Who it is for

This is written for these industrial repair and maintenance companies.

  • Electric motor rewinding and repair shops
  • Pump, gearbox and compressor overhaul workshops
  • Hydraulic and pneumatic repair companies
  • CNC and machine tool service companies
  • Electrical panel, drive and automation service teams
  • Diesel generator and transformer maintenance firms
  • Crane, hoist and material-handling service companies
  • Shutdown and plant maintenance contractors

Before you decide

When this may not be the right fit.

  • Your technicians are all booked on jobs, so more enquiries would only lengthen the wait for the plants that already called.
  • You cannot say which machines you repair best, and leads gathered from every kind of fault would fit none of your skills.
  • No one records where a call came from, and spending on leads would give you nothing to compare.

Before you decide

Agree the work. Know how to judge it.

Lead generation for industrial repair and maintenance companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial repair and maintenance companies. Anything missing is noted in the written scope, with who will supply it.

The phone log of recent breakdown calls
Bring the call register, the diary or the phone's call history for a recent stretch. We read it for sources and repeat callers. If none exists, we start the record fresh and the first period serves as the baseline.
Access to the marketplace account
We need to see the IndiaMART or similar login to read past enquiries and set up reply templates. Share a view, or sit with us. Without it we cannot judge which listings produce price checks only.
A decision on the jobs you refuse
State the machines, the sizes and the places you will not take. A lead system that does not know this passes you work you must decline. If the owner leaves this open, we set a narrow list and widen it with your word.
Technicians willing to note plant visits
Agree with the technicians that they will write down names and machines seen at plants, on a simple sheet. It only works if they accept it. Without their cooperation, the estate target list rests on the owner's memory alone.
Someone to own the enquiry record
One named person must keep the record up to date and chase the open quotes. A sheet nobody owns stops being filled within the first busy week. We plan a lighter record if your team is small.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sort last season's calls by how they arrived

    We take the phone log, the IndiaMART messages and any WhatsApp chats and sort them by source with you, noting which became job cards. The owner marks the enquiries that were really worth having. This gives us the sources already working, and the ones that only fill the inbox.

  2. 2

    Decide which repairs you want more of

    You choose the machines and the plant types where a job pays and fits your bench, and those you would pass on. Lead generation aimed at everything fills the workshop with small jobs. We write the choice down in a short sheet your team can read.

  3. 3

    Build the enquiry record the phone fills

    We set up one sheet or form that the person answering the phone completes: machine, make, fault, plant, estate, contact and source. We try it with the team on three real past calls, and you change any field that slows the person who is on the line.

  4. 4

    Draft replies for marketplace messages

    We write the first responses for IndiaMART and directory enquiries in your voice, asking the questions you need before a quote. You read them against your own habits and strike anything you would not say. The templates are then pinned for whoever opens the messages.

  5. 5

    Walk one estate with a target list

    We list plants in one industrial area from public directories and your own memory, and you mark which already know you. A technician who visits a plant for a job notes down who else works nearby. The visit capture sheet holds names and machines, not sales talk.

  6. 6

    Trace jobs back to their sources

    Once enquiries flow through the record, we set the jobs won against the sources noted at the start. You see which source brought job cards, which brought only price checks, and you decide where to spend more effort and which source to drop.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we buy leads from a lead-selling site?
Be careful. Sold leads are shared with several vendors, and a repair buyer wants one quick reply. Test one source on a small spend and judge it by job cards won, not by the number of names.
How do we count an enquiry that comes twice?
Match on plant and machine. A plant that calls on the phone and then messages on WhatsApp is one enquiry. Keep one record and note both sources, so counts do not inflate.
What makes an enquiry qualified for us?
Agree it in writing: a machine you repair, a plant you can reach, and a person who can approve the job. An enquiry for a machine you do not handle is recorded and passed on, not counted.
Can technicians really bring leads?
Yes, because they are inside the plants. Give them a short sheet and thank them when a lead becomes a job. Do not make it a quota, or they will stop noting the real ones.
Do we need to pay for ads to get repair leads?
Not as a starting point. The first gain for a repair shop lies in enquiries it already receives and loses: calls unanswered, marketplace messages that go cold, quotes nobody follows. We fix those and record sources, then decide whether a small paid test for one machine type is worth running. Paid clicks for breakdown searches can be costly, so we test one repair first and read the calls before adding anything.
How do we stop the same plant being counted twice?
Each record carries the plant name, the machine and the contact, so the person entering it sees an earlier entry for that plant before opening a new one. If a plant calls, messages on WhatsApp and then fills a form for the same breakdown, we note all three as one enquiry with three touches. This keeps the count honest and shows which routes plants prefer for urgent faults.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.