Skip to content
GullySales

Industrial repair and maintenance companies · Follow up systems

Call back after every quotation and every repair, so no plant drifts to a rival.

A follow-up system for an industrial repair company is the dates, owners and messages that makes sure a quotation, a finished repair or a contract end date gets a call. GullySales works with your team on who follows up, what they say and where each plant's next call is written down.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Maintenance technicians inspect a disconnected industrial motor

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For industrial repair and maintenance companies

Where it usually goes wrong, and what we would do.

  • “The quotation goes out and the file closes”

    A gearbox overhaul quote is sent by WhatsApp or email and the technician returns to the bench. The purchase officer, who asked three vendors, hears nothing further from you and chooses the one who rang to check. Silence reads as lack of interest.

  • “The repair is done and the relationship stops”

    A plant that has just been rescued is as willing as it will ever be to hear about a contract. A call after delivery, asking how the machine is running and what else the plant owns, is the moment a workshop easily misses.

  • “A contract end date nobody owns”

    An annual maintenance contract ends on a date that sits in one file. If no named person looks at that date ahead of time, the customer renews by chance or hears from a rival first.

  • “Follow-up fails when it rests on one person”

    If only the owner remembers which quotations are open, the system dies when the owner is on a site visit. A shared record with a named caller for each stage lets the work carry on without that person.

What we do

What we deliver for industrial repair and maintenance companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A stage list from enquiry to renewal

    Each step a job passes through, such as call taken, site visit, quotation sent, repair done and contract offered, with who owns it.

    Result: Everyone can say where a job stands.

  2. A call rule for every quotation

    A set follow-up date entered when the quotation is sent, with a call script that asks about the decision and not just whether it arrived.

    Result: No live quotation is left without a next call.

  3. A post-repair call

    A short routine after delivery to ask how the machine is running, note other machines on site and mention the contract.

    Result: Each finished job produces a new conversation.

  4. An AMC end-date calendar with owners

    Every contract with its end date, the machine list and the person who calls before it lapses.

    Result: Renewals are scheduled by you, not by chance.

  5. WhatsApp templates for common messages

    Approved wording for visit confirmation, quotation follow-up and post-repair check, kept in the business account.

    Result: The team sends consistent messages without retyping.

  6. A lost-quote reason list

    A required note on every lost quotation: price, delay, a rival's relationship or a changed plan.

    Result: You see why quotes are lost and can act on it.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Send or record these after each quotation and each repair.

Quotation sent with machine and fault
Record the date, the machine and the cause stated. A call about the quote can then name the exact job the plant asked for.
Waiting for purchase approval
Note who must approve and the vendor form pending. A plant may be waiting on paperwork, not on you.
Job done and test run
Send the completion note with the test result. A short message at close gives the plant something to show the approver.
Call after the repair
Ask if the machine is holding and note the answer. A fault that returns is easier to fix when you hear of it early.
AMC end date and the owner
Record the date and a named person on your side. A contract nobody owns lapses without a call.

Who it is for

This is written for these industrial repair and maintenance companies.

  • Electric motor rewinding and repair shops
  • Pump, gearbox and compressor overhaul workshops
  • Hydraulic and pneumatic repair companies
  • CNC and machine tool service companies
  • Electrical panel, drive and automation service teams
  • Diesel generator and transformer maintenance firms
  • Crane, hoist and material-handling service companies
  • Shutdown and plant maintenance contractors

Before you decide

When this may not be the right fit.

  • You get a few calls each season and the owner remembers all of them, so a routine would add steps without catching a lost job.
  • Quotes are given verbally with no written copy, so there is nothing to follow up against.
  • Nobody on your team is free to make a call, and reminders would pile up unread.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for industrial repair companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial repair and maintenance companies. Anything missing is noted in the written scope, with who will supply it.

Quotations sent in the last stretch
Bring copies or the register. We need plant, date, value and status. We read them for the quotes that went quiet and for the plants never called back, which become the first tasks in the system.
The AMC contract list
Provide plants and end dates. Without dates we cannot set the calendar. Where an AMC is lapsed, tell us whether the plant was informed by call or by letter.
A named person for each task
Decide who calls, who records and who renews. A system with no names fails. Where one person holds several tasks, we suggest handing one to another so that a holiday does not stop the calls.
Lost-quote reasons you remember
Write the reasons plants gave. We start the reason list from them. Reasons such as a nearer vendor or a lower price tell us what the call should ask.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Count the quotations still open

    We gather every quotation sent in the recent past and mark with you which are won, lost or unknown. The unknown ones are the first follow-up job. This shows how much work is hanging, and who last spoke to each plant. We also note the last person at each plant who spoke to you, because a follow-up call goes to a name, not to a company. The owner reads the list in full and tells us which plants matter first to the business.

  2. 2

    Choose the stages from enquiry to renewal

    We write a short list of stages in your words, from enquiry to AMC renewal. You decide what counts as moving from one to the next. A quote is not closed until someone has heard a yes or a no. Where a quote is lost, the stage records the reason in the plant's own words so the reason list grows from real answers. The reasons feed the lost-quote list directly.

  3. 3

    Set the call rule for each quotation

    The rule says who calls after a quote leaves, what they ask and what they write down. It is not a script. You decide whether the estimator or the owner calls the larger plants. The call is logged with the date and the plant's answer, so the next caller does not repeat the question. The rule also says what the caller does when the plant asks for a revised quotation, so a changed price is recorded and not lost in a message thread.

  4. 4

    Write the post-repair call and message

    We draft a call for the day after a machine is back running, and a WhatsApp message to go with it. A technician checks the wording. The answers go into the plant record. We then test it on live jobs with the team, and the owner reads the first week's tasks to see whether they match how the workshop really runs. The templates cover the quote check, the post-repair message and the AMC reminder, each in the shop's own plain wording.

  5. 5

    Give each AMC end date an owner

    We build a calendar of contract end dates and put a named person against each. The person is told before the date, not after. You test it on the next three contracts due. The owner reads the first set of results and decides which template to rewrite.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

When should we chase a quotation?
There is no fixed rule. Ask the buyer when they expect to decide and put the call on that date. If the plant gives no date, ring after the next likely purchase meeting and record what you hear.
Is it pushy to call after a repair?
No, if the call is about the machine. Asking how it is running and whether anything else needs attention is service. The contract mention comes after, and only if the plant is happy.
Do we need software for this?
A shared sheet works to begin with. Software helps once several people take calls or the list of open quotes outgrows one screen. We set up the stage list and call rules first, whatever tool holds them.
What if the plant says the machine runs fine and no call is needed?
Thank them and note the date. Record that it ran well and ask when the next service is due. A call that confirms good work builds the base for a contract, and it takes a minute. Do not push a visit the machine does not need.
What if the estimator is the only person who knows the plants?
Then the system must bring that knowledge out of one head. We record each plant's contacts, the last conversation and the next call in the sheet so another person can pick up if the estimator is away or leaves. Ask the estimator to dictate what they know about the top plants in one sitting. The owner keeps the sheet, and the estimator remains the main caller.
Which plants should we follow up first?
Start with open quotations of the highest value and the AMC contracts nearest their end dates, since both can be lost by silence. Then the plants whose last job was recent and who have not been called. Small, one-off jobs come last. We rank the list with you on the first day, and the person who calls works down it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.