Jig and fixture manufacturers · Content marketing
Write how your toolroom solves workholding problems in an engineer's own words.
Content marketing for a jig and fixture maker is the set of case notes, guides and explainers that answer a tooling engineer's questions before they brief a shop. GullySales writes in plain words from what your engineers say and asks them to check every technical line.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What content marketing means
Content marketing is writing articles, guides and pages that answer the questions buyers search before they are ready to enquire. This makes your business visible and trusted before the first call. GullySales plans this content from the first conversation onward, choosing topics that match real search demand rather than guesses.
Also for jig and fixture manufacturers
- Social media marketing for jig and fixture makers
- Lead generation for jig and fixture makers
- SEO for jig and fixture makers
- Local SEO for jig and fixture makers
- Buyer personas for jig and fixture makers
- CRM for jig and fixture makers
- Follow-up systems for jig and fixture makers
- WhatsApp marketing for jig and fixture makers
Sales and marketing for jig and fixture manufacturers, the overview.
Last updated 14 Nov 2026.
For jig and fixture manufacturers
Where it usually goes wrong, and what we would do.
“Engineers read to judge competence”
A buyer who has never met you reads a note on datum choice or clamping sequence to decide whether you understand the problem. One accurate paragraph earns more trust than a list of capabilities.
“Case notes sit unwritten on phones”
A fixture proved out, cycle time improved and the customer was pleased, yet the story lives only in a few photographs. Without a written note, the next buyer never sees the proof.
“Confidential parts force a different style”
You cannot name the plant or show the drawing. A case note works by describing the problem, the type of fixture and the machine, and leaving identifying details out.
“Technical content written by outsiders goes wrong”
A writer who does not know the shop floor gets a term wrong, and an engineer notices at once. Every piece has to pass through your design team before it is published.
What we do
What we deliver for jig and fixture manufacturers.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Anonymised fixture case notes
One-page notes on the problem, the fixture type, the machine and how it was proved, with no client named.
Result: A set of notes ready to attach to a quote or post.
Briefing guide for new parts
A plain guide telling a buyer what to send when asking for a fixture, and why each item matters.
Result: A guide you can link in every reply to an enquiry.
Fixture-type explainers
Short pieces on when to choose hydraulic clamping, a welding jig, a tombstone or a checking fixture.
Result: One explainer for each fixture type you build.
Engineer review step
A routine where your designer reads each draft and marks corrections before publishing.
Result: A marked-up draft kept for every published piece.
Content calendar tied to enquiries
A list of topics drawn from the questions your team answers on calls.
Result: Topics taken from real buyer questions, not guesses.
How the result is measured
- Pages published
- Organic traffic
- Enquiries from content pages
Recorded as a baseline before work starts, so every later report has an honest comparison.
Posts and pieces to plan
The case notes and guides an engineer reads before briefing a toolroom.
- How we fixtured a thin-walled housing
- A case note on distortion and clamping force, with sketches and a neutral part. The engineer who solved it reviews every line.
- What to send us for a fixture quote
- A briefing checklist covering the drawing, machine, operation, batch pattern and trial date, ready to print.
- Hydraulic against manual clamping
- An explainer for a machine shop owner comparing cost, loading time and maintenance, without a claim of savings.
- Locating on a casting
- A guide to datum choice for rough surfaces, drawn from fixtures you have built.
- When a checking fixture beats a gauge
- A note for the quality head on where each fits, with a photograph of the one you built.
Who it is for
This is written for these jig and fixture manufacturers.
- Machining fixtures and vices for VMC, HMC and CNC lathe work
- Welding jigs and positioners for fabrication shops
- Assembly fixtures for automotive tier suppliers
- Inspection and checking fixtures with gauges
- Hydraulic and pneumatic clamping fixtures
- Press tool holding and trimming fixtures
- Fixture repair, modification and re-qualification work
- Special-purpose workholding for electrical and electronics manufacturers
Before you decide
When this may not be the right fit.
- The engineers who design the fixtures have no time to review drafts, and a case note with an error would be read by exactly the experts you want to impress.
- You have no fixture you may describe, even in anonymised form, and the notes would stay generic.
- You want to publish customer drawings, which you do not hold the right to show.
Before you decide
Agree the work. Know how to judge it.
Content marketing for jig and fixture makers: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Bring questions from sales calls and examples of objections that delay a decision. Choose a subject expert who can check the substance, and identify evidence that can be published.
Make the scope clear
Agree the reader, buying question, format, and distribution route for each piece. Set the approval process and distinguish new research from rewriting material you already have.
Check the work in use
Ask a colleague to use the draft in a real buyer conversation. It should answer the question, support its claims, and make the next step clear without requiring a sales pitch to explain it.
Know when to change course
If the same unanswered question appears in several articles, improve the strongest page before commissioning another. More words are not a substitute for missing evidence.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from jig and fixture manufacturers. Anything missing is noted in the written scope, with who will supply it.
- Notes from the last ten quote conversations
- Whatever your salesperson or designer wrote down after talking to engineers, even scribbles in a diary, shows what buyers wonder about. Without these notes, we invent the questions, and the content answers things nobody asked.
- Trial reports or photos from fixture proving
- Fixtures are proved on the machine before they go out, and someone records the result. Bring those sheets or photos where the customer allows. They give the case notes a factual spine. If none exist, notes rely on the designer's memory and read thinner.
- A reviewer in your team with the final say
- One engineer must read each piece for technical accuracy and approve it. Tell us who it is and when in your routine they can respond. Without a reviewer, a wrong clamping description could reach a customer's engineer and cost trust.
- Written permission to describe each fixture
- For any case note, we need a message or email from the customer, or your own judgement that nothing identifying is shown. Keep it on file. Where permission is not available, the note is rewritten as a general explainer without reference to a specific job.
- Your view on what you will not publish
- Some processes, clamp designs or inspection methods are your edge. Tell us what to keep out of the public pieces. Without this line, a case note could give a competitor a clear picture of how you build, and you would find out only after it is printed.
How it works
How the content marketing work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Collect the questions engineers ask on calls
We go through your WhatsApp threads, email replies and the notes your salesperson keeps from calls, and list the questions tooling engineers ask before they brief a shop. These questions, in the engineers' own words, are the raw material for every piece. You tell us which questions you are tired of answering, and we mark the ones where a wrong answer once cost you a job, because those deserve the first piece and the closest review.
- 2
Pick the fixtures worth writing up
From jobs already delivered, we shortlist those that teach something: a tricky datum, a part that distorted on clamping, a checking fixture that replaced a gauge. You decide which can be written about, with customer names removed. A job that cannot be anonymised is left out.
- 3
Interview the engineer who designed it
We record a conversation with the designer or toolroom head about one fixture, from the part's problem to the trial on the machine. Questions follow the order an engineer would ask them. We write from the recording, and you read the draft for technical errors and anything that reveals a customer.
- 4
Draft the briefing guide for new parts
Using your part-brief form as a base, we write a plain guide telling a buyer what to send for a fixture quote: drawing, operation, machine, batch and launch date. The guide carries two examples of a good brief and a poor one. Your designer corrects it until it matches how you work, and your salesperson adds the two questions buyers forget to ask, such as the machine's table size or whether a trial on site is expected before the final payment.
- 5
Schedule pieces against the sales conversation
We arrange the pieces so that each one answers a question that appears in a live enquiry: first a briefing guide, then case notes, then explainers on fixture types. You tell us the fixture types you want more of, and those move to the front of the schedule.
- 6
Trace enquiries back to the pieces read
We record which pieces were opened, and which enquiries mention one. You and we compare these with the figures kept before the work began. Pieces that bring no briefs are rewritten or retired, and the next ones are drawn from the questions that did bring part drawings.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Do we have to share designs to write case notes?
How long should a case note be?
Should a case note include the price of the fixture?
Who should write the case notes, the engineer or a writer?
Do we need a person on staff to write all this?
Can one case note work for several fixture types?
How long is the contract?
Who will actually do the work?
What do you need from us?
What if we are not happy with the work?
More for jig and fixture manufacturers
Related work to consider.
Closest to this: content and social
Also for jig and fixture manufacturers
Or start from the overview: sales and marketing for jig and fixture manufacturers.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.