Skip to content
GullySales

Jig and fixture manufacturers · Follow up systems

Ask what happened to the part, and ask on a day written in the record.

A follow-up system for a jig and fixture maker is a set of rules for when and how to ask about a layout, a quote or a finished fixture. GullySales writes the rules, the scripts and the record that tells your team who calls whom.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For jig and fixture manufacturers

Where it usually goes wrong, and what we would do.

  • “No reply to a quote does not mean the answer is no”

    A layout and price go to the engineer, and no reply arrives. The part may be waiting for customer approval, given to another shop or dropped. You cannot tell without asking.

  • “The first fixture is the best moment to ask for more”

    Once a fixture has proved out, the engineer has just seen what you do. That is the time to ask about the second machine, variants and the next part launch.

  • “Follow-up that sounds like pressure backfires”

    Calling to ask whether the engineer has decided yet irritates a busy person. A call that offers a revised layout or a question about the launch date is welcomed.

  • “Nobody owns the chase”

    Sales assumes design will chase, design assumes sales will. Without a named owner for each open quote, every one waits for someone else.

What we do

What we deliver for jig and fixture manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Follow-up rules by stage

    What to do after a layout is sent, after a quote, after a trial and after delivery, and who does it.

    Result: A written rule for each stage with a named owner.

  2. Call and WhatsApp scripts

    Short scripts for each stage that ask a useful question rather than a pressing one.

    Result: A script sheet for each stage, in your own voice.

  3. Open quote board

    A list of every open layout and quote with the engineer, the last contact and the next action.

    Result: A board that shows which quotes have no next action.

  4. Duplicate-set routine

    After a trial succeeds, a call asking about further machines and the next launch.

    Result: A call note added to every approved fixture.

  5. Lost-quote reasons record

    A line explaining why a quote was lost, when the buyer is willing to say.

    Result: A record of reasons you can review with your design team.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The moments after a layout, a quote or a trial that need a recorded next step.

Design layout sent
Ask the engineer if the clamping and locating match their process sheet. Record which points they questioned.
Quote sent, no reply
Ask whether the part is still planned or has been passed to another shop. Record the answer and the reason.
Fixture dispatched
Confirm who will receive it and when the trial is planned on their machine. Record the contact.
After the trial
Ask what the operator and the quality head found. Record any change request before it becomes a complaint.
Repeat set requested later
Check whether a second fixture is wanted for a duplicate machine, and note the answer.

Who it is for

This is written for these jig and fixture manufacturers.

  • Machining fixtures and vices for VMC, HMC and CNC lathe work
  • Welding jigs and positioners for fabrication shops
  • Assembly fixtures for automotive tier suppliers
  • Inspection and checking fixtures with gauges
  • Hydraulic and pneumatic clamping fixtures
  • Press tool holding and trimming fixtures
  • Fixture repair, modification and re-qualification work
  • Special-purpose workholding for electrical and electronics manufacturers

Before you decide

When this may not be the right fit.

  • Nobody on your side owns the chase, so a rule would be written and then ignored while jobs stay open.
  • You have not recorded the reason when a quote is lost, so follow-up would not teach you anything.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for jig and fixture makers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from jig and fixture manufacturers. Anything missing is noted in the written scope, with who will supply it.

The list of quotes still open
Every quote that has not been closed, with the engineer's name and the date it was sent. This is the first thing the new rules apply to. Without it, the system starts empty and the quotes already at risk are never chased.
A salesperson willing to ring a silent plant
Follow-up depends on someone being comfortable calling an engineer who has not replied. Name that person and tell us how they feel about it. If no one is willing, we plan more WhatsApp contact and fewer calls, and the pace changes.
Your rule on revising a quote
Decide whether you reduce rate, change the scope or hold firm when an engineer says the quote is high. We need your actual position, not an aim. Without it, the follow-up message promises flexibility your costing cannot back.
Trial reports for the fixtures just delivered
A passed trial is the best moment to ask for the next part. Share the dates and outcomes of recent trials. Where trial records are not kept, we begin by setting up a one-line note after each trial so the follow-up has something to rest on.
The reasons you give when you lose a quote
List the reasons you already know: price, delivery, a rival's layout or a plant that built in-house. We turn them into a short pick-list. If you cannot list them, the first rounds of follow-up will be used to find out, and the list will be built from the answers.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Find where open quotes go cold

    We go through the quotation file with your salesperson and mark every quote that went quiet, then note the stage at which it stalled: layout sent, price sent or trial pending. The pattern shows which stage needs a rule first. You tell us which quiet quotes you still hope for, and we ask your designer which of them had a layout that needed a second look, since a quote may have stalled on the drawing and not on the price.

  2. 2

    Write the rule for each stage

    For layout sent, quote sent, order placed, fixture delivered and trial passed, we write what to say, who says it and what the next question is. The rules use toolroom words. You change any rule that sounds unlike a call you would make, so your team can follow it without a script in hand.

  3. 3

    Prepare the call and WhatsApp wording

    We write the short calls and messages for each stage, such as asking whether the layout matches the clamping the engineer imagined, or whether the quote needs a lighter version. Each has a polite way to ask for a clear no. Your salesperson reads them aloud and trims anything stiff.

  4. 4

    Put the open quotes on a board

    We build a simple board, a sheet or a tool, showing each open quote, its stage, the owner and the next contact. Anyone entering the toolroom can see which quotes are alive. You decide who reviews the board and when the team gathers around it.

  5. 5

    Plan the duplicate-set conversation

    After a fixture proves out, the plant may need a second set for another machine. We write the question that opens that conversation, and the point in the trial report where it is asked. You decide whether duplicates are quoted as a new job or at a reduced rate, and we note which machine the second set is meant for, so the question is about a real need on the plant floor and not a general offer.

  6. 6

    Review lost reasons with the quote file

    We read the lost-quote reasons recorded since the rules began and compare them with the earlier file. You and we look at which stages still lose quotes and which rules were skipped. Rules that were never used are cut, and the ones that brought a reply are kept, with the wording that worked copied into the scripts for the next round of open quotes.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How often should we follow up?
Set the day for each stage in the record and follow it, with a reason for every call. We do not prescribe a fixed rhythm, because it depends on the customer's launch date and your relationship.
What if the engineer never replies?
Try the purchase contact or the quality head, who may know the status. If nobody answers, mark the quote as quiet, note the date of the last attempt and move on.
How do we follow up with a plant that goes silent after a quote?
Ask a closed question about the part, not the price. Is the part still going ahead, and has the date moved? A silent engineer may be waiting on their own customer. A clear question gives them an easy reply and tells you whether to hold capacity.
Should the designer or the salesperson follow up after a layout is sent?
Let the designer ask the technical questions and the salesperson ask about the order. A layout question needs an engineer's answer, while a price question needs someone with authority on terms. Record both conversations against the same enquiry so neither repeats the other.
How many times should we follow up on one quote?
There is no fixed number. Follow up at each stage with a fresh question or a new piece of information, such as a revised layout or a note on delivery. Stop when the engineer says no or when two different questions have gone unanswered. We write the stopping rule with you so that it is firm but never rude.
Who sends the follow-up after a layout, the designer or the salesperson?
The salesperson sends it, with the designer on hand for technical questions. Engineers reply to a designer about clamping but to the salesperson about price and dates. We write one message for each case and agree which of them leaves the toolroom first, so the plant hears from one voice.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.