Jig and fixture manufacturers · Lead generation
Find the engineers whose new part has no fixture yet, before the process sheet is frozen.
Lead generation for a jig and fixture maker means putting your toolroom in front of the tooling or manufacturing engineer while a new part is still being planned. GullySales works on who to approach, what to send them and how every enquiry is recorded.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Also for jig and fixture manufacturers
- CRM for jig and fixture makers
- Follow-up systems for jig and fixture makers
- SEO for jig and fixture makers
- Local SEO for jig and fixture makers
- Social media marketing for jig and fixture makers
- Content marketing for jig and fixture makers
- Buyer personas for jig and fixture makers
- WhatsApp marketing for jig and fixture makers
Sales and marketing for jig and fixture manufacturers, the overview.
Plan the next part of the work
Last updated 21 Nov 2026.
For jig and fixture manufacturers
Where it usually goes wrong, and what we would do.
“The best lead is a part that has no fixture yet”
A machine shop that has just won a new component is the buyer with a live problem. By the time the process sheet is fixed and the part is running in a vice, the shop has settled on a workaround. Leads are worth more when they reach you early.
“Regular customers hide the thinness of the pipeline”
Three or four plants may give you steady work, and that makes outbound effort feel unnecessary. When one plant moves its toolroom work elsewhere, there is no second list of engineers who already know your name.
“Enquiries sourced from marketplaces need a different reply”
An IndiaMART enquiry for a fixture is a phone message with no drawing. Replying with a rate loses to the shop that replies with the questions needed to quote.
“The second buyer sits in quality”
A checking fixture is wanted by the quality head, not the person who bought the machining fixture. Treating them as separate leads doubles the doors into one plant.
What we do
What we deliver for jig and fixture manufacturers.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Target list of shops with parts in planning
Machine shops, tier suppliers and fabricators within reach, grouped by the fixture type each is likely to need.
Result: A named list, sorted by fixture type, that your team can call from.
Introduction note for the tooling engineer
A short note with a sample layout for one fixture type, written for the engineer and not the purchase desk.
Result: A note and sample layout ready to send to one plant at a time.
Part-brief form and WhatsApp template
Asks for drawing or model, material, machine, cycle time wanted and launch date.
Result: An enquiry that arrives without a drawing is caught before a quote starts.
Source tracking for every enquiry
A sheet recording where each enquiry came from, which fixture type it was and whether it became an order.
Result: You can see which source brought the enquiries that turned into fixtures.
Second-buyer outreach to quality heads
A note for the quality manager of plants you already supply, offering a checking fixture.
Result: A separate call list of quality contacts in current customer plants.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
What to ask for before a fixture enquiry can become a quote.
- Part drawing or 3D model
- Ask the tooling engineer for the file, or a dimensioned sketch with datum faces marked. Without it you can guess at a price but not design.
- Machine and operation
- Record the machine, such as VMC, HMC or lathe, and the operation. A fixture for first-op milling differs from one for a finish bore.
- Material and batch pattern
- Note the material and whether the part runs in small lots or continuous batches. It decides the clamping method and the wear allowance.
- Inspection need
- Ask whether a checking gauge or a CMM-ready location is wanted too, as it brings the quality head into the order.
- Date the fixture must be on the machine
- Record the customer's trial date. Your design start depends on it, and you can decline a job you cannot meet honestly.
Who it is for
This is written for these jig and fixture manufacturers.
- Machining fixtures and vices for VMC, HMC and CNC lathe work
- Welding jigs and positioners for fabrication shops
- Assembly fixtures for automotive tier suppliers
- Inspection and checking fixtures with gauges
- Hydraulic and pneumatic clamping fixtures
- Press tool holding and trimming fixtures
- Fixture repair, modification and re-qualification work
- Special-purpose workholding for electrical and electronics manufacturers
Before you decide
When this may not be the right fit.
- Your toolroom is loaded with regular customers' work and has no capacity to design a new fixture, so more enquiries would only be refused.
- You send quotes without a design layout, and a new lead would see only a price that cannot be compared.
- No one in your team can read a part drawing at the first call, so every enquiry would wait for the one engineer who can.
Before you decide
Agree the work. Know how to judge it.
Lead generation for jig and fixture makers: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from jig and fixture manufacturers. Anything missing is noted in the written scope, with who will supply it.
- Fixture order book with plant names
- The list of fixtures built, with the plant and the part behind each, shows us who has already trusted you. A spreadsheet or even a ledger photographed page by page will do. Without it the target list starts from guesses and the first approach goes to plants that never reply.
- Three finished fixtures with permission to describe
- Pick three fixtures whose owners agree that you may mention the fixture type and machine, with names removed if needed. The introduction note rests on real work. When none are cleared, we write around your toolroom capability and the notes read plainer but still stay honest.
- A named designer for the layout request
- Someone in your team must be able to turn a part drawing into a rough layout when an engineer asks. We need to know who that is and how much spare time they have, since the lead plan is sized to what they can answer. Without this, enquiries pile up unanswered.
- The list of machines in your toolroom
- Machine names, table sizes and inspection equipment let us state what you can build and check, which engineers read before sending a drawing. A printed list from the shop floor is enough. If it is missing, the notes avoid size claims and engineers may hesitate to send parts.
- Your decision on which plants to avoid
- Only you know the plants that pay late, change the drawing after the build or ask for unpaid trials. Tell us the names or the kinds of plant to leave off. Without that decision the list may bring enquiries that cost your designer time and never close.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Sort the fixture order book by plant
We ask for the order book, the quotation file and the invoice list for fixtures you have built. From these we mark which plants came back with a second part, which ordered once, and which enquiries never became orders. You decide which kinds of plant you would gladly build for again, because that choice decides who goes on the target list first.
- 2
Name plants with parts still in planning
We look for plants launching a new component, adding a machine or moving work from outside vendors in-house, using trade news, supplier meets and your own sales memory. Each plant gets a named tooling or manufacturing engineer where one can be found. You strike out any plant you would not want to serve, and the list then carries only buyers worth a call.
- 3
Write the note an engineer would open
We draft a short introduction that opens with a type of fixture you have built, the machine it served and what the engineer should send you to get a layout. You read it aloud and change any line that sounds unlike a toolroom owner talking. The result is a note and a WhatsApp version that your own team can send without rewording.
- 4
Build the part-brief form and its reply
With your design engineer we list what a quote needs: the part drawing or model, the operation, the machine, the batch size and the launch date. These become a short brief form and a WhatsApp reply that asks for the missing pieces in plain order. A sample enquiry is run through it together, and gaps are fixed before the form goes live.
- 5
Tag each enquiry to where it came from
We set up a simple register in which every enquiry carries its source: a cold note, a referral from a peer plant, a marketplace listing or a walk-in at an exhibition. The person who takes the call fills one line and nothing more. You see at once which routes bring parts that are actually quotable.
- 6
Read enquiries against the order book
We compare the register with the figures noted at the start: enquiries received, drawings that reached your designer and quotes sent. You and we go through the lost ones and the silent ones, and decide which plants to approach again and which routes to drop. The read is of your own numbers, not a promise of any count.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Should we chase large plants or small shops?
Does lead generation mean buying a database?
What do we do when the enquiry has only a photograph?
Should we quote a standard price list for fixtures?
Who writes to the engineers, GullySales or our own team?
What if an engineer sends a drawing and then goes quiet?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
More for jig and fixture manufacturers
Related work to consider.
Closest to this: leads and follow-up
Also for jig and fixture manufacturers
Or start from the overview: sales and marketing for jig and fixture manufacturers.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.