Skip to content
GullySales

Jig and fixture manufacturers · Manufacturing

A jig and fixture maker is called while the part drawing is still open, not after the line is frozen.

A production engineer at a machine shop has a new component running on a VMC, and the operator is spending four minutes loading it in a vice. The engineer photographs the part, notes the cycle time wanted and calls two toolrooms already known to the plant. The one that comes back with a sketch and a rough number is the one handed the drawing.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

In one paragraph

Jig and fixture manufacturers design and build the workholding, gauges and assembly tooling that hold a part steady while it is machined, welded, checked or assembled. Marketing makes you findable by production and tooling engineers. Sales turns a part drawing into a design, a quote and a fixture that is signed off on the shop floor.

Most fixture work comes from people who already know a shop, so the toolrooms that grow are the ones found early in a new part's life, before the process sheet is fixed. Being easy to brief, quick to quote and clear about what the buyer must send is most of the difference.

Last updated 14 Nov 2026.

How buyers decide

How jig and fixture manufacturers are chosen.

The buyer is a tooling engineer, a manufacturing engineer or the owner of a machine shop, and increasingly a purchase manager who has been handed an engineer's request. They search for fixture makers near the plant, ask peers in the same industrial area, or go back to the toolroom that built the last one. A short list of two or three gets the part model or drawing.

They compare on design clarity, how well the toolroom understands datum and clamping for that machine, delivery against the part launch, and whether the first fixture works on the first trial. Price comes in after confidence. A shop that sends a simple layout with clamping points and a loading sketch is trusted over one that sends only a rate.

After the first fixture proves out, the same buyer brings the next part, the duplicate set for a second machine, and repair or rework of old fixtures. The relationship is built on trials that went well and drawings kept safely.

The problem

What usually goes wrong for jig and fixture manufacturers.

Common situations to check against your own enquiry records.

  • “Enquiries arrive as a phone photo and no drawing”

    The buyer wants a number while standing at the machine, and we cannot quote without datum details, so the lead goes to whoever guessed.

  • “Our work sits with three or four regular customers”

    When one plant changes its toolroom policy or stops a model, a large part of the order book goes with it and we have no other buyers warming up.

  • “The website says tooling solutions and shows a stock lathe”

    A tooling engineer searching for hydraulic fixtures or welding jigs finds a page that names no fixture type, no machine and no industry we serve.

  • “Quotes go out and the engineer never replies”

    A design layout and price are sent, and then we do not know whether the part was dropped, given to another shop or is waiting for customer approval.

  • “Trial reports and photos are never used”

    Every fixture is proved on the customer's machine, yet the photos, cycle-time gains and notes stay on someone's phone and never reach a buyer who is still deciding.

  • “Repeat and duplicate orders are not asked for”

    A customer who bought one fixture for one machine may need three more, and nobody calls to ask when the next part launch is.

What we do

What we do for jig and fixture manufacturers.

Possible deliverables for jig and fixture manufacturers. Your written scope confirms what is included.

  1. A page for each fixture type and each machine

    Separate pages for machining fixtures, welding jigs, checking fixtures, hydraulic workholding and tombstones, each describing the parts, machines and industries you have built for.

  2. A part-brief form that gets a quotable enquiry

    A short form and WhatsApp template asking for the part drawing or model, material, machine, target cycle time, batch size and launch date, so the first message is quotable.

  3. Fixture case notes with the customer left unnamed

    One-page write-ups of a fixture, the problem it solved, the machine it ran on and how it was proved, with client names withheld unless they have agreed in writing.

  4. Quote follow-up routine

    A record of every layout and price sent, the engineer and the purchase contact for it, and a rule for when and how to ask what happened to the part.

  5. IndiaMART and Google Business Profile upkeep

    Listings with product categories for fixtures, jigs and gauges, real shop photographs and a rule for who answers each marketplace enquiry.

  6. A capability presentation for plant engineers

    A short deck with your machines, software, inspection equipment and sample fixtures, written for tooling and manufacturing engineers.

How the result is measured

  • Enquiries by source and fixture type
  • Enquiries that included a drawing or model
  • Layouts and quotes sent against orders won
  • Duplicate and repeat orders from existing customers
  • Share of orders from the top three customers
  • Trial-proved fixtures with a case note written

Recorded as a baseline before work starts, so every later report has an honest comparison.

Every service, written for jig and fixture manufacturers

Each has its own page: what it involves for jig and fixture manufacturers, what you get, and what it is measured on.

Worth a page and a campaign of their own

Machining fixtures for new part launches · Welding jigs for repeatable fabrication · Checking and inspection fixtures · Hydraulic and pneumatic workholding · Fixture design and 3D layout approval · Duplicate fixtures for additional machines · Fixture repair and modification · Cycle-time and loading-time improvement · Tombstone and multi-part fixtures

Priority campaigns

Campaigns for what jig and fixture manufacturers most want to sell.

Each one planned around when your buyers decide, and measured against the baseline.

  • New part launch outreach

    A list of machine shops and tier suppliers in your area that are known to add parts, with a short introduction and a sample layout for a typical fixture on offer.

  • Welding jig campaign for fabricators

    Search ads and a landing page for welding jigs and positioners, aimed at fabrication shops that repeat the same assembly and lose time on manual alignment.

  • Duplicate fixture follow-up

    A call and WhatsApp note to existing customers once a fixture has proved out on their machine, asking whether more machines or variants are coming.

  • Checking fixture outreach to quality heads

    A note aimed at quality managers in auto and engineering plants explaining how a checking fixture saves time against CMM inspection, with a sample drawing.

  • Industrial estate presence

    Visits and a printed capability sheet for industrial estates and small-scale industry associations near your toolroom.

Beyond search

Where we reach buyers of jig and fixture manufacturers, beyond Google.

Search matters, but it is rarely the only way this industry's buyers find a supplier.

  • Machine shops and job-work units

    Job-work shops around you running VMC and CNC. Each gets an introduction with a sample fixture for the kind of part on its machines.

  • Automotive and engineering tier suppliers

    Plants that add new parts each year. The note is addressed to the tooling or manufacturing engineer, since the general purchase desk only sees the rate.

  • Fabrication and structural shops

    A shop that welds the same frame every week and lines it up by hand is the natural buyer of a welding jig or positioner.

  • Machine tool dealers

    A buyer of a new CNC machine asks the dealer who can supply the workholding. A short introduction to the dealer's sales engineer puts your shop in that answer.

  • Design consultants and product engineers

    A small design firm whose product is moving to production needs a build partner for assembly and checking fixtures, and writes to the shop it has already met.

Why GullySales

Fixture makers are chosen on a drawing and judged on the trial.

A tooling engineer sends a part model to two or three toolrooms and compares design clarity and how the fixture is proved. Choosing a firm means choosing who reads the drawing, who sends the layout and who returns after the trial. GullySales joins those steps for you.

  • From the part drawing to the proved fixture

    The model arrives, a layout and quote go out, the fixture is made and the trial proves it. We build how the drawing is acknowledged, how the layout reply is followed and how a trial note is written up, so a proved fixture brings a duplicate order or an introduction.

  • Written for the tooling engineer and the purchase manager

    Two readers see your quote: the engineer who checks layout and clamping, and the purchase manager handed the request. We begin from what each looks for, then arrange pages and replies so design clarity reaches the engineer and a clear price and drawing list reaches the buyer.

  • Layouts, quotes and duplicate orders in toolroom terms

    Your quote file and order list are taken as written before work begins. Afterwards we read in toolroom terms: enquiries by fixture type, enquiries carrying a drawing or model, layouts against orders, duplicate and repeat orders, the share from your top three customers and trial notes written.

  • Scope and fee fixed before the first layout reply

    The toolroom's scope and fee are set on paper before the first layout reply is reshaped. We promise no order count and no rank. Where the plant already sells every fixture through one customer's purchase desk, we say that new marketing would not suit.

Sales and channel services

Choose the sales work your business needs.

Review the sales and channel catalogue in the context of jig and fixture manufacturers. Each page states what the service covers and when it is unsuitable. A specialist programme is not assumed to fit every industry.

210 services available.

Sales strategy and process (29)
Sales training and enablement (29)
CRM, sales operations and RevOps (46)
Customer success and retention (42)
Fractional leadership and audits (22)
Dealers, distributors and partners (42)

A practical starting point · Jig and fixture manufacturers

Start with one buying journey.

Use a real enquiry to find the first useful change. You do not need to buy every service listed on this page.

The record to review
Start with a recent RFQ and the quotation it produced. Remove buyer identifiers, then retain the specification, quantity, delivery requirement, and reason the order moved forward or stopped.
The buyer's question
Check whether the buyer can establish technical fit before asking for a price. Purchasing, engineering, and the end user may need different evidence from the same product page.
The handover to agree
Give the technical question to someone who can answer it, and keep the commercial follow-up with a named owner. A vague request for a catalogue should not be treated as a qualified RFQ.

Who it is for

This is written for these jig and fixture manufacturers.

  • Machining fixtures and vices for VMC, HMC and CNC lathe work
  • Welding jigs and positioners for fabrication shops
  • Assembly fixtures for automotive tier suppliers
  • Inspection and checking fixtures with gauges
  • Hydraulic and pneumatic clamping fixtures
  • Press tool holding and trimming fixtures
  • Fixture repair, modification and re-qualification work
  • Special-purpose workholding for electrical and electronics manufacturers

Before you decide

When this may not be the right fit.

  • You want a guaranteed Google ranking or a guaranteed number of leads. Nobody honest can promise either.
  • You need enquiries by next week and have nobody to answer them.
  • You want posts and reach reported, not enquiries and orders.

How it works

How the work runs for jig and fixture manufacturers

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sort old layouts and quotes by drawing, win and repeat

    Old layouts and quotes show which enquiries had a drawing, which were won and which customer sent a second machine's fixture.

  2. 2

    Make enquiries quotable

    A part-brief form, a WhatsApp template and a rule for who replies and with what, so a first message gets a clear next step.

  3. 3

    Write a page for each fixture type and machine

    A page for each fixture type and machine, with case notes that describe the problem and the proof without naming a client.

  4. 4

    Reach the engineers

    Outreach to machine shops, tier suppliers and fabricators, with search ads for urgent fixture searches.

  5. 5

    Ask for the duplicate set and the referral after each trial

    Follow-up after each trial, duplicate sets asked for early, and referrals sought from the plants that already use your fixtures.

Proof

Published examples of our work.

Each example names the client and the work delivered. Some examples come from related industries; use them to assess the method, not to predict your results.

All case studies
  • SB Engineering

    Situation
    Buyers searching for laser cutting and sheet metal work in Bengaluru were finding other suppliers first, because the company did not rank for the terms its own customers type.
    What we did
    • The site redesigned for mobile
    • Search work on the buyer's terms
    • Content that shows the work
    • Social channels managed
    Result
    • Website traffic rose 60% within six months, against a target of 50%.
    • High-quality leads rose 45%, with a rise in conversion rates alongside them.
    • Fifteen target keywords moved up the rankings, five of them into the top three positions.
    Read the case study
  • Burhani Hydroline

    Situation
    The website was dated. Menus were hard to follow, pages were slow, and it did not work properly on a phone, which is where a buyer looks first.
    What we did
    • Research before design
    • Wireframes and prototypes
    • The full product catalogue
    • An online checkout
    Result
    No numbers were recorded for this engagement. The work is described in full in the case study.
    Read the case study

Also worked with

Chord Road Hospital · Curtain Label · Difesa Security Services · Felicity Inn · Hands On CSR · Implevista · Kambar Group · Kalessi · Kerur Pain Clinic · LL Trust · Lucky Deals · Natural Gases · NavaShakthi Souhardha · NewCom Logistics · Proton Technical Services · Shakthi Foundation · Shakthi Group · Urbanest · Insyde Studio · Venkateshwara Laser Tech · Vivara Studios

Where this fits

Three pieces of sales work, in this order.

Start by finding where enquiries and orders are being lost. Agree the changes to your sales process, then decide who will manage the work and review the results.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions jig and fixture manufacturers ask before they call.

Not here? More answers, or ask on WhatsApp.

We depend on a few customers. Can marketing reduce that?
Marketing can widen the list of plants that know you. We research the machine shops and suppliers near you and prepare an introduction aimed at engineers whose parts are still in planning. Whether they order depends on the part and the price.
Will you design the fixtures or write the technical content?
No. Your engineers design and prove the fixtures. We write the pages and case notes in plain words from what your team tells us and ask your engineers to check every technical line.
Does a toolroom need a website at all?
A simple one helps. Buyers who do not know you will check it after a referral, and search brings some new engineers. It needs real fixture types, machines and photographs, not a general tooling statement.
How do we handle confidentiality of customer drawings?
We do not publish a customer drawing or name. Case notes describe the problem and the type of fixture only, and a client name appears only with written permission.
Is IndiaMART worth it for fixtures?
It can bring enquiries for standard workholding and gauges. Custom fixtures need a drawing, so the value is in a clear reply and a form that asks for what you need to quote.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
Fixes to reply time, follow-up and your Google Business Profile are the quickest to show, because the enquiries already exist. Ads can follow soon after follow-up is in place. SEO and content take longer. How long each takes depends on your business, and we tell you which applies to you after we have spoken. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
To start, last month's enquiries in any format and time with whoever handles them. After that, access to the accounts the work touches, such as the website, Google Business Profile or CRM.

Part of Manufacturing. See the other industries in the sector.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.