Skip to content
GullySales

Jig and fixture manufacturers · Website

Give the engineer a site that shows the fixture type, the machine and where to send a drawing.

A website for a jig and fixture maker is a set of pages that tells a tooling engineer what you build, on which machines and for which industries, and how to send a part for quoting. GullySales works on structure, wording, photographs and the enquiry form.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For jig and fixture manufacturers

Where it usually goes wrong, and what we would do.

  • “Tooling solutions says nothing”

    A heading like that over a stock photograph leaves the engineer to guess whether you build workholding, press tools or spare parts. Naming the fixture types fixes this in one stroke.

  • “The enquiry path asks too much or too little”

    A form that asks only for name and phone produces calls with no drawing. A form with a page of fields is abandoned. The right form asks for the few items needed to quote.

  • “A phone visit is the main way people read it”

    Engineers check a vendor on a phone after a referral, sometimes at the plant. Pages that load slowly or need pinching and zooming are closed.

  • “Proof is missing”

    A site with no photographs of your shop, machines or inspection equipment gives the buyer nothing to check. Real images and a machine list make a small toolroom look established.

What we do

What we deliver for jig and fixture manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Site structure by fixture type

    Pages for each fixture type, each machine and each industry, linked from the home page.

    Result: A site map where each fixture type has its own page.

  2. Capability page with machine and inspection list

    Your machines, design software and inspection equipment set out for a technical reader.

    Result: One page an engineer can print or forward.

  3. Part-brief enquiry form

    A short form for drawing or model, material, machine, cycle time, batch and launch date.

    Result: A form that sends a complete brief to your inbox.

  4. Case notes section

    Anonymised fixture write-ups linked from the matching fixture page.

    Result: Case notes that sit beside the fixture type they prove.

  5. Phone-first layout and speed check

    Pages tested on a mobile phone for loading, readability and tap targets.

    Result: A test record on a phone you name.

  6. Contact route that works

    Click-to-call, WhatsApp link and a map pin at your gate on every page.

    Result: The same contact route visible on every page.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

What a tooling engineer looks for on a toolroom's website.

Fixture types you build
A page for each type, such as welding, machining, assembly and checking, with one photograph and the machine named.
Machines and inspection equipment
A capability page listing the machines, travel limits and measuring equipment, so an engineer can judge fit.
How to send a part for quoting
A short form asking for the drawing, machine, operation and batch pattern, which works from a phone.
Industries you serve
A page for each sector with a neutral example and no customer names unless permission is held.
Where the toolroom is
A contact page with a map link, shift hours and a gate instruction for visitors.

Who it is for

This is written for these jig and fixture manufacturers.

  • Machining fixtures and vices for VMC, HMC and CNC lathe work
  • Welding jigs and positioners for fabrication shops
  • Assembly fixtures for automotive tier suppliers
  • Inspection and checking fixtures with gauges
  • Hydraulic and pneumatic clamping fixtures
  • Press tool holding and trimming fixtures
  • Fixture repair, modification and re-qualification work
  • Special-purpose workholding for electrical and electronics manufacturers

Before you decide

When this may not be the right fit.

  • You have no photograph of your own fixtures, and a new site would carry stock images of lathes.
  • Nobody opens the enquiry inbox, so a better form would collect drawings that sit unread.
  • The old site already brings drawings and the problem lies in the quoting step, which a redesign would not fix.

Before you decide

Agree the work. Know how to judge it.

Websites for jig and fixture makers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from jig and fixture manufacturers. Anything missing is noted in the written scope, with who will supply it.

Current domain and hosting details
The login to the domain registrar and the hosting account, or the vendor's contact. Domains can be bought in a former employee's name. Without access, we cannot connect the new site and a launch can be held up while ownership is sorted.
Machine list with table sizes and capacity
A printed or typed list of your machines, their table sizes and any inspection equipment. Engineers check this before they send a drawing. If it is missing, the capability page stays general and plants may send parts that do not fit your machines.
Clean photographs of finished fixtures
Photographs of fixtures that can be shown, with no customer part visible. A good phone in daylight is enough. When none exist, we plan a shoot at the toolroom first, and the launch waits for it.
A decision on showing repair and re-qualification
Say whether you want to be known for repairing and re-qualifying old fixtures. If yes, we give it a page. If no, the site does not mention it and plants with such work will go elsewhere.
Someone who can answer the contact form
Name the person who reads form submissions and rings back. We need their phone number for testing, though it will not be published. Without a named person, forms go to an unread inbox and the site appears to bring no enquiries.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Collect the fixtures you want to be known for

    We ask you to list fixture types in the order you would like to build them, with the machines and industries behind each. This list decides the shape of the site. You mark the types that bring margin and the types you accept only to keep a customer. We also ask which industries you want named on the site, such as automotive tier suppliers or electrical makers, since an engineer scanning the home page looks for their own sector before anything else.

  2. 2

    Draw the site on paper with the designer

    With your design engineer, we sketch the pages: home, fixture types, machines and inspection, case notes and contact. Each fixture type gets its own page. You approve the sketch before any screen is built, and changes are cheap at this point.

  3. 3

    Write the capability page from the machine list

    We take your machine list, inspection equipment and the sizes you handle and write them as a plain page an engineer can check against a part. Your toolroom head corrects any wrong figure. Items under repair or on order are left off the page. Where a machine is shared with another unit or hired from a neighbour, we write it as such, since engineers who visit will see the shop floor and a mismatch with the page costs more trust than a shorter list would.

  4. 4

    Build the part-brief form engineers will fill

    The enquiry form asks for the part drawing, operation, machine, batch size and launch date, with a field for a photograph if no drawing exists. We test it on a phone and on a slow connection. Submissions go to your salesperson and the designer together, and the confirmation page tells the engineer what happens next and who will call, in your toolroom's own words. We send three test briefs through, one with a drawing, one with only a photograph and one with a missing field, to see that each arrives whole.

  5. 5

    Place the case notes and test on phones

    Case notes are placed under each fixture type, with the customer removed. We open the site on an ordinary phone, check speed, tap targets and the call button, and test the contact route by ringing the number. Anything that fails is fixed before launch. We also walk through the site as an engineer who has only a part number and a deadline, asking whether the capability page, the form and the phone number can be reached in a few taps, and we change the order of the menu if they cannot.

  6. 6

    Read visits and briefs against the old site

    After launch, we compare visits, form submissions and calls with the figures recorded before the work began. You and we check which pages the quotable briefs came through. Pages no one reaches are changed or merged, and no number of enquiries is promised.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How many pages does a toolroom site need?
Enough for each fixture type and machine you want to be found for, plus a capability page, case notes and contact. Add pages only when you have real material to put on them.
Can we show customer drawings on the site?
No. Show your own demonstration parts or describe the fixture type in words. A customer drawing or name goes up only with the customer's written permission.
Should the site publish our machine list?
Yes, in plain terms, because an engineer decides on fit from it. List machine type, table size or travel, and the inspection tools you hold. Leave out serial numbers and age. Update the list when equipment changes, so it matches what the visitor sees.
Do we need a page for repair and re-qualification?
Yes if you take that work. A plant with a worn fixture searches for repair, not a new build, and a separate page shows you take it in and return it checked. Add a photograph of a restored fixture and the information you need to start.
How many pages does a toolroom website need?
One for each of the fixture types you want to be found for, plus a few fixed pages: home, capability, case notes, about and contact. A small toolroom might have eight pages and a larger one twenty. We decide the number from your fixture list, not from a standard package.
Can we change the site ourselves later?
Yes. We build it on a system that your designer or an office assistant can edit for text and photographs, and we give a short guide for adding a case note or changing the machine list. Structural changes such as new page types are better left to a developer, and we say so in the guide.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.