Skip to content
GullySales

Material handling equipment manufacturers · CRM

Keep every site visit, drawing and quotation in one record.

A CRM for a material handling maker is a shared record of every factory, consultant and warehouse operator you deal with, with visits, drawings, quotations and service dates attached. GullySales sets up the fields, the stages and the habits so the record is used.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Material Handling product collection

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For material handling equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “The knowledge sits in one engineer's phone”

    The load, the bay width and the buyer's preference are known to the person who visited. When that engineer is away or leaves, the next caller starts again. A shared record keeps the history with the customer.

  • “A quotation without a stage is a guess”

    Open quotations pile up with no sign of whether the buyer is comparing, waiting for budget or has gone elsewhere. Defined stages show what is genuinely live and where to spend the next call.

  • “New supply and service need the same record”

    The factory that bought a crane is also the one that needs an inspection and an annual maintenance contract. When service sits in a separate notebook, the chance to renew or extend is missed.

  • “A CRM nobody fills in is worse than a diary”

    A heavy system with a long list of fields is skipped on a busy site. The record has to be short enough to fill in on a phone after a visit, and the owner has to read it for it to matter.

What we do

What we deliver for material handling equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Field and stage design

    A short set of fields (equipment, load, site, decision-maker) and stages from first visit to order.

    Result: Everyone logs the same things in the same order.

  2. Customer and site records

    One record per factory or consultant, with contacts, visits, drawings and quotations linked.

    Result: The history is found in one place.

  3. Service and renewal dates

    Inspection and annual maintenance dates held against each customer.

    Result: A due date is seen before it passes.

  4. Phone-friendly entry

    A way for an engineer to log a visit from site in a minute or two.

    Result: Records are written the same day as the visit.

  5. Owner's review sheet

    A view that shows open quotations by stage and by person.

    Result: The owner sees where each quotation stands.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Fields that keep a site visit, a drawing and a quote together.

Site and plant name with contact roles
Filled by the engineer after the visit. Roles matter more than names, because the person who raised the need is rarely the one who signs.
Equipment, load, span and lift
Entered from the visit notes. It lets anyone in the office rebuild the quote when the engineer is on another site.
Quotation stage and date sent
Entered by sales. It separates a quote waiting for a decision from one that went silent.
Installed equipment and commissioning date
Filled at handover. It starts the record that later drives inspections and spares.
Next service or inspection due
Filled by the service team. It turns past customers into after-sales calls, so the contract is not sold by chance.

Who it is for

This is written for these material handling equipment manufacturers.

  • EOT crane, gantry and jib crane makers
  • Hoist and winch makers
  • Stacker, pallet truck and trolley manufacturers
  • Conveyor and roller track makers for factory lines
  • Racking, platform and storage equipment makers
  • Forklift attachment and special lifting tackle makers
  • Dock leveller, lift table and tail-lift makers
  • Makers who combine new supply with crane inspection and AMC

Before you decide

When this may not be the right fit.

  • Your engineers keep notes on their phones and will not share them, so the first step is agreeing where notes go.
  • You have a handful of live quotations, which a clear shared sheet can hold.
  • Nobody has time to enter records after a visit, so the CRM would be empty within a few visits.

Before you decide

Agree the work. Know how to judge it.

CRM for material handling equipment makers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from material handling equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

The quotation book and enquiry diary
All the places where quotations and visits are written now, whatever their state. Photographs of pages are fine. A record we do not see is lost on the move. Include the enquiry diary kept by the person who answers the phone, since that is where early contacts, which never reach a quotation, are recorded.
A list of installed equipment by customer
Where each machine was supplied, the model and the year, so service dates can be set. A rough list will do. Without it, service reminders start only for new supplies. Add the service dates from any annual maintenance contracts, so the first reminders are real ones and the service engineer sees them from the first day.
A phone or tablet for each field engineer
Engineers need a device that runs the tool on site. Their own phones are acceptable with their agreement. Without devices, entries are made at the office and slip. Engineers on the road must be able to enter a visit note while standing in the bay, so check that the device has signal at the sites you visit. Tablets work as well as phones for entering drawing references.
A decision on who owns the customer
State whether the salesperson, the service engineer or the owner holds the relationship after the sale. One line is enough. Without it, the record shows no owner after delivery. Where the sales and service engineers disagree, the owner's call is final, and we record it so the rule is not reopened with each customer.
A day of your sales head's time for testing
The tool proves itself only when your sales head uses it for real work. A day is enough. If it cannot be spared, acceptance is delayed. Please also let us watch how the quotation is currently priced and approved, because the tool will carry that approval as a stage. Pick a day with visits planned.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one order from enquiry to commissioning

    We take a recent order and follow it through the enquiry, visit, drawing, quotation, order, fabrication, installation and handover with your sales head, noting where each record lived. You pick the order. What exists afterwards is a drawn journey, from which stages and fields are taken.

  2. 2

    Design stages and fields for a quotation book

    We set up the stages from enquiry to order and the fields for equipment, load, span, site, drawing reference and decision maker, using the tool you choose. You approve names and who may move a deal. Afterwards a quotation has a stage and an owner, not a guess.

  3. 3

    Test with a day of real visits

    Your sales engineer uses a test copy for a day of real visits, entering notes from the phone, and tells us what took too long. You decide what to simplify. The result is a short list of fixes made before live records are loaded.

  4. 4

    Load customers, sites and installed equipment

    We clean and import the customer list, with each site and the equipment installed there, linked to service dates. You approve the clean list. Afterwards a service call and a new enquiry both find the same customer record.

  5. 5

    Check the rules and the owner's sheet

    We test that a quotation cannot sit without a stage, that service dates raise reminders, and that the owner's review sheet shows open quotations by value and age. You check it against a sheet you know. Afterwards the rules have been proved on facts.

  6. 6

    Move the team over and name the keepers

    Once your engineers accept the test, we switch off the old diaries and sheets and name who keeps each record. You approve the switch. We later read open quotations and recorded visits against the figures taken before the move.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid software?
Not always. A well-built shared sheet is enough for a small team. We suggest a tool only when your volume of quotations and service dates outgrows it, and name options in ordinary use in India.
How do we get the site visit team to fill it in?
Keep it short, make the owner ask for it in reviews, and enter the first records together. A record that the owner never reads is dropped within days.
Should installed equipment be recorded as a separate record?
Yes. Each installed machine needs its own record with serial number, capacity and handover date, linked to the customer. That is what lets your service team find every customer with a given model when a spare or a notice is needed.
Who owns the customer after the sale?
Name one person from sales as the account owner, with a service contact beside them. Without a named owner, a customer's service call goes to whoever answers. Record the owner on the customer record and review it when staff move.
Should installed equipment be a separate record?
Yes, link it to the customer and the site as its own record, because a machine outlives the quotation and carries a service date, a certificate and a history. A customer may have several machines at several sites, and a single customer line cannot hold that. We set one record per installed unit, with fields for model, serial number and next inspection. Your service engineer confirms the fields suit the work.
Whose name sits on the customer after delivery?
Decide it in writing, since the record needs one name. In some works the sales engineer holds the customer for new supply and the service engineer for upkeep, and the two see each other's notes. We set the tool to show both. The risk is a customer who hears from neither, so the rule states who calls first when equipment is due for inspection.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.