Skip to content
GullySales

Material handling equipment manufacturers · Follow up systems

Follow up each quotation until the buyer says yes or no.

A follow-up system for a material handling maker is the routine that decides who contacts the buyer after a visit or quotation, on what basis and what happens when there is no reply. GullySales designs the routine, the messages and the owner's list of open quotations.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Material Handling product collection

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For material handling equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “Silence after a quotation is read as a no”

    The buyer may be waiting for budget approval, a second quote or the shutdown schedule. Without a polite, useful follow-up the maker assumes the order is lost and stops calling at the moment the buyer is ready.

  • “A follow-up that only asks has no value”

    Calling to ask whether the buyer has decided adds nothing. A call that brings a revised drawing, a reference site or an answer to the safety officer's question gives the buyer a reason to pick up.

  • “Layout drawings are given away early”

    A detailed drawing sent with the first quote can be used to get a lower price elsewhere. Deciding what is shared at each stage keeps the engineer's work from becoming the competitor's tool.

  • “Service customers drift away unannounced”

    An annual maintenance contract lapses when nobody calls before the end date. A reminder tied to the contract date, with a short note on the last inspection, brings the customer back into the conversation.

What we do

What we deliver for material handling equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Follow-up rule

    A written rule that names the owner of each quotation and the next contact for every stage.

    Result: No quotation is left without a named person.

  2. Message set

    Short messages for after a visit, after a quotation, on silence and on a lost order.

    Result: The team does not write each message from scratch.

  3. Value-adding contacts

    A list of useful things to send: a reference site, a revised drawing, a note on testing.

    Result: Each follow-up gives the buyer something.

  4. Open quotation list

    A sheet showing every live quotation, its stage and the date of the next contact.

    Result: The owner reviews all open quotations in one sitting.

  5. Lost-order notes

    A short record of why each order was lost, filled in when the buyer replies.

    Result: The team learns where quotations fail.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Moments in a capital-equipment sale that call for a message or a visit.

Site visit just completed
A note to the engineer who raised the need, summarising what was measured and what drawing will follow. It keeps your visit fresh.
Layout drawing sent
A call to ask if it matches the bay and whether the safety officer has seen it. Buyers change the plan after a drawing.
Quotation sent
A message that checks they received it and offers to walk through it. Silence after a quote can be a missing step, not a no.
Shutdown or budget date mentioned
A reminder set against the date the buyer gave. An order can wait for a shutdown, and the follow-up should match it.
Equipment commissioned
A visit or call at handover, then the service schedule agreed with the owner. It is where after-sales cover is first offered.

Who it is for

This is written for these material handling equipment manufacturers.

  • EOT crane, gantry and jib crane makers
  • Hoist and winch makers
  • Stacker, pallet truck and trolley manufacturers
  • Conveyor and roller track makers for factory lines
  • Racking, platform and storage equipment makers
  • Forklift attachment and special lifting tackle makers
  • Dock leveller, lift table and tail-lift makers
  • Makers who combine new supply with crane inspection and AMC

Before you decide

When this may not be the right fit.

  • Your quotations are not recorded anywhere, so a follow-up would reach buyers you have forgotten.
  • The team has no technical person free to answer a question that follow-up brings, and the buyer would wait.
  • You are adding sequences to a business with a few open quotes, where a call from the owner does the job.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for material handling makers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from material handling equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

Every open quotation with its date
A list with customer, equipment, value and date sent. A sheet from the register is enough. Without it we cannot find which ones have gone quiet. Add the revision number of each quotation, since a buyer who received two versions must be followed up on the later one. Mark the ones that carry a drawing, since those follow a different rule from a bare price.
A rule on discounts a follow-up may offer
Say whether the person following up may revise a price, and by how much, or must refer to you. A line is enough. Without it follow-ups avoid price altogether. Where a discount needs the owner's approval, say so, since that is a stage the follow-up must wait on rather than chase.
Past reasons orders were lost
What buyers said when they went elsewhere, as your team remembers. Brief notes suffice. Without them, the lost-order record starts from the first call. Include notes on whether the buyer gave a reason such as budget, a rival or a postponed project, because each reason leads to a different later contact. Even a line such as price, delivery or a rival's offer is enough to start the record.
Service due dates for installed equipment
Dates when inspections or annual tests fall due give useful reasons to contact. A list will do. Without it the service contacts begin with equipment you supply from now. Mark equipment under an annual maintenance contract, as those customers hear from the service engineer on a separate rule.
Agreement on who speaks for the works
State who may answer technical questions in a follow-up. A name is enough. Otherwise technical queries wait for you and the buyer cools. Technical replies should not wait for the owner, so list the questions an engineer may answer alone.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Open the list of quotations with no reply

    We take every open quotation from your register and mark who sent it, when, what was in it and whether a reply came. You tell us which still look alive. What exists afterwards is a count of quotations gone quiet, kept as the baseline.

  2. 2

    Write the rule for who contacts the buyer

    With your sales head we set who follows up each quotation, the sales engineer or the designer or the owner, and on what basis. You approve the rule. Afterwards every open quotation has a named person and a reason to call.

  3. 3

    Draft contacts that give the buyer something

    We write messages that carry a useful item, such as a clearance check for the bay, a foundation note or a service reminder, so a follow-up is not only a request for an order. Your engineer corrects the content. Afterwards the team has a set to send at each stage.

  4. 4

    Decide what to release in a layout drawing

    We agree with your designer which drawings go out with a quotation and which wait for an order, since a free layout can be taken to another maker. You decide. The result is a rule on drawings that the whole team follows.

  5. 5

    Run the rule on live quotations

    Your sales engineers use the rule on the open quotations for a stretch you choose, and note where it failed. You decide what to change. Afterwards the open list is current and the rule has been tried.

  6. 6

    Read lost-order notes and service contacts

    We sit with your sales head and read the recorded reasons for lost orders and the service contacts made, against the quotation count from the start. You decide what changes. Our report states what the record shows, never an order forecast.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How often should we contact a buyer?
Set the rhythm by stage and by what the buyer told you, such as a budget date or a shutdown. We agree it with you rather than apply a fixed number to every quotation.
What if the buyer never replies?
Send a closing message that thanks them and leaves the door open, then mark the quotation as quiet. A buyer who reappears later finds the history intact.
What should a follow-up say besides asking for the order?
Give something useful: a corrected drawing, a note on installation, a reference to a similar site. A message that only asks has no value for the buyer. Pick one item from the conversation and send it with a short line, then wait for a reply.
Should the engineer or sales follow up?
Technical questions go to the engineer, and the commercial follow-up goes to sales. Agree who owns each quotation so the buyer is not contacted twice with different messages. Record each contact on the same record so both can see it.
How soon after a quotation does a buyer expect a call?
Expect the buyer to want a call when they have something to decide, which is not on a fixed schedule: a plant with a shutdown date moves faster than one filling a budget line. Ask the buyer at the time of sending when they will review it, and note the answer in the record. The follow-up then follows the buyer's own calendar. We write that question into the quotation cover note and the rule for the date.
Should the engineer or the salesperson follow up?
Let the salesperson open the contact and bring in the engineer when the question is technical, as a buyer values an answer from the person who knows the load. A designer who follows up every quotation will have no time to design. We write the rule so the salesperson owns the date and the engineer owns the technical reply. Test it on live quotations before fixing it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.