Skip to content
GullySales

Metal casting foundries · CRM

Keep one record per pattern, because a drawing lost in a chat is a furnace shift lost.

A CRM for a metal casting foundry is a single record of every plant, contact, drawing, pattern, quote and order, kept so nothing sits in a chat or a notebook. GullySales sets up the fields, the stages and the habit of recording that fit how a foundry sells.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For metal casting foundries

Where it usually goes wrong, and what we would do.

  • “Drawings arrive on WhatsApp and email at once”

    A single enquiry may come as a photograph of a drawing in a chat and a revised PDF by email. Without one record, two people quote separate versions and the buyer notices. The record carries the revision and the sender.

  • “The sale has stages unlike other trades”

    Enquiry, quote, pattern approval, trial casting, trial result and standing order are separate steps, and a buyer can stall at any of them. A flat list of leads cannot show that ten quotes have not yet become trial castings.

  • “The pattern is an asset that outlasts the order”

    Who owns the pattern, where it is stored and when it was last repaired matter years after the first batch. These facts belong against the account, not in the memory of the person who negotiated them.

  • “Account history protects the relationship”

    When a porosity complaint arrives, the person replying needs the last three heats, the previous fix and the buyer's earlier remarks. A record that holds this turns an argument into a cause-and-fix reply.

What we do

What we deliver for metal casting foundries.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Fields built for castings

    Alloy, weight, yearly quantity, machining, test report required and pattern ownership as fields on every opportunity.

    Result: Any enquiry shows the facts needed to price it.

  2. Stages from drawing to standing order

    Pipeline stages that match enquiry, quote, pattern, trial and batch.

    Result: You see where quotes stall.

  3. A pattern register

    A list of patterns by customer, storage place, condition and repair history.

    Result: Each pattern can be found and its owner stated.

  4. Complaint and fix log

    A record for each rejection with cause, action and the heat concerned.

    Result: Repeat issues are visible by customer and cause.

  5. Import of past accounts

    Old orders and contacts entered so the system starts with history.

    Result: Your first day in the system already holds your buyers.

  6. Simple reports for the owner

    Views for tonnage by customer, open quotes and trials awaiting result.

    Result: The owner reads the position without asking sales.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Fields a foundry record needs on every drawing and pattern.

Alloy, weight and yearly quantity
Filled by the estimator at enquiry. Lets anyone see what the part is and whether it suits the plant before pricing.
Drawing revision
Filled by whoever receives the file, and changed when a new revision arrives, so the quote always matches the current drawing.
Pattern ownership and location
Who paid, who owns, where it is stored and its repair history. Settles an argument that otherwise returns at every reorder.
Trial casting result
Filled by sales after the buyer reports on machining and inspection, with the reason for any rejection.
Stage in the sale
Enquiry, quote, pattern, trial or batch order. Shows where quotes stall and which buyers are waiting on the foundry.

Who it is for

This is written for these metal casting foundries.

  • Grey iron foundries for machine tools, pump casings and brake parts
  • SG iron and ductile iron foundries for valves, pipe fittings and auto parts
  • Steel casting foundries for heavy engineering and railways
  • Non-ferrous foundries for brass, bronze and aluminium gravity castings
  • Stainless steel foundries for pumps and process equipment
  • Shell moulding and resin sand foundries making precision castings
  • Foundries with in-house pattern shop and machining
  • Small jobbing foundries serving local engineering units

Before you decide

When this may not be the right fit.

  • Drawings and rates are held by one person who will not move them into a shared record.
  • You have so few active buyers that a notebook already holds everything and nothing is missed.

Before you decide

Agree the work. Know how to judge it.

CRM for foundries: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from metal casting foundries. Anything missing is noted in the written scope, with who will supply it.

The spreadsheets and phone lists in use
Every spreadsheet, folder and phone contact list where accounts and quotations are kept today. We import from them so the record does not open empty. If accounts live only in an estimator's phone, the first task is a sitting to copy them, with that person's agreement, and the record opens later.
A pattern list checked on the floor
A walk through the pattern store with the foreman to note each pattern, its customer and its condition. If the list has never been made, the walk is the first task and the register opens when it is done. Without it, a customer's pattern could be scrapped or lent without anyone knowing it was owned elsewhere.
A person to enter drawings as they arrive
Name the person who records a drawing on the day it arrives by chat or email, and a cover for when that person is on the shop floor. Without a named person, the record is filled once and then abandoned, and drawings go back to being lost between two phones and an inbox.
Past complaints with cause and fix
Copies of past complaints and the replies sent, with customer names removed if you prefer. They seed the complaint log with cases the team recognises. Without them the log opens empty, and the team has no example of a good entry to follow when a real complaint arrives.
A decision on who sees prices and patterns
Decide which staff can see the price per kilogram and pattern ownership, and which can only enter drawings. Without this decision, everyone sees everything, and an estimator who leaves takes the foundry's whole price book and customer list to the next employer.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Follow one casting from drawing to dispatch

    We trace a recent order through the foundry: who received the drawing, who priced it, who approved the pattern, who poured the trial casting and who raised the invoice. You supply the emails, chat messages and the job card. The trace shows what the record must hold, and where the knowledge sits in one person's phone and nowhere else in the shop.

  2. 2

    Name the stages from drawing to standing order

    We write the stages in the foundry's own words: drawing received, quoted, pattern approved, trial casting, first order, standing order and lost. You approve the names, and a stage that nobody can tell from the one before it is merged with it. The stages show the owner exactly where drawings stall, whether at pricing, at pattern approval or after the trial.

  3. 3

    Build the fields a casting needs

    We set up the fields a foundry needs and a generic record lacks: part name, metal and grade, weight, yearly quantity, pattern status and owner, testing required and machining wanted. You tell us which fields the estimator will really fill at the desk. A field nobody completes in a busy hour is removed before the record goes live.

  4. 4

    Enter the pattern register from the store

    We list every pattern and core box the foundry holds against the customer it belongs to, with its condition and where it is stored, after a walk through the store with the foreman. Patterns outlast orders, so the register must be right. Any pattern whose ownership is in doubt is marked for the owner to settle with the customer.

  5. 5

    Import past accounts and open the complaint log

    We import the past accounts from spreadsheets and phone contacts, and open a log for complaints with the cause found and the fix made. You decide who may see it. The history of a porosity complaint protects the relationship, because the next call starts from what was done last time and not from a blank page.

  6. 6

    Build the owner's reports and read first entries

    We build two or three simple reports, such as quotations open by stage and patterns held by customer, and review the first entries with the estimator and the sales engineer. Against the earlier spreadsheet, you see what the record shows that the old one could not. We promise no increase in orders, only a clearer view of where they come from.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM suits a small foundry?
One the staff will actually update. A simple sheet-based tool or an affordable CRM in ordinary use in India works if the fields are right. We choose with you after seeing how drawings reach the office.
Will our people use it?
Only if entry is short and replaces something they already do. We keep fields few, link entry to the quote routine and review what is left blank, so the record stays alive.
Which CRM suits a small foundry?
Whichever the estimator will actually open. The needs are simple: fields for alloy, weight, quantity and revision, stages from enquiry to batch, and a pattern list. A basic system with those fields beats a large one nobody updates.
Will our people use it?
They will if entering a drawing takes less effort than the chat it came in. Build the record so the estimator logs alloy, weight and quantity once, and tie one named person to its upkeep. Without an owner, the record decays.
Can the record link to our accounts software?
Sometimes, depending on the software the foundry uses and whether it exports orders and invoices. We check this at the start and tell you before the build. If the two cannot connect, the order number is entered by hand in one step, kept short. The record is not a replacement for the accounts, and it does not hold the ledger.
What happens to the record when an estimator leaves?
The accounts, quotations and notes stay in the foundry's record, because they were entered there and not in a private phone. The owner removes the leaver's access on the day they go, and reassigns their open quotations. We write this step into the handover rules so no buyer is left without a contact.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.