Metal casting foundries · Follow up systems
A quote is not finished when it is sent; the trial casting is where the follow-up starts.
A follow-up system for a metal casting foundry is the routine that returns to each quote, trial casting and quiet account at the right moment. GullySales builds the reminders, the messages and the ownership so that no drawing is quoted once and forgotten.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What follow up systems means
A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.
Last updated 14 Nov 2026.
For metal casting foundries
Where it usually goes wrong, and what we would do.
“Buyers go quiet after the quote”
A purchase executive collects rates from several foundries and then waits for a decision from the design team. Silence means the quote is in a queue, not that it was refused, and a polite call about the drawing revision restarts it.
“The trial casting needs its own follow-up”
After a trial lot is shipped, the buyer machines it, tests it and talks to quality. A foundry that asks nothing hears nothing. A short request for the inspection result, with an offer to adjust gating, keeps the next step moving.
“Complaints are follow-up in disguise”
A porosity rejection is also a chance to show method. The reply that states cause, action and what changes on the next heat does the work of a year of marketing. A reply that waits is read as indifference.
“Standing orders drift”
A buyer with a repeat order slowly moves a part elsewhere when nobody checks schedules. A planned call near the buyer's own planning cycle, asking about forecast and upcoming drawing changes, catches the drift while it can be stopped.
What we do
What we deliver for metal casting foundries.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Quote follow-up steps
A set of reminders and message drafts for each quote, tied to the buyer's stage.
Result: Every open quote has a next date and an owner.
Trial casting check-in
A message and a call script asking for the machining and inspection result and offering corrections.
Result: Trials do not close by silence.
A cause-and-fix reply format
A one-page format for dimension and porosity complaints, naming cause, containment and change.
Result: Replies follow the same structure each time.
Standing order review calls
Calls planned for each repeat buyer to ask about forecast, schedule and drawing changes.
Result: Repeat accounts are asked before they leave.
WhatsApp templates for follow-up
Short message drafts that stay polite and specific, with the drawing number quoted.
Result: Messages sound like the trade, not a mass broadcast.
An overdue list
A view of quotes and trials with no contact for a stated period.
Result: Neglected enquiries are listed for the owner.
How the result is measured
- Follow-up completion rate
- Average number of follow-ups before close
- Enquiries closed after repeat follow-up
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
What to send and record after a quote and a trial casting.
- Quote acknowledgement
- A short message confirming the quote, the drawing revision and the assumptions on alloy, weight and quantity.
- Revision query
- A polite call about a drawing revision that arrived after the quote. It restarts a quote sitting in the buyer's queue.
- Trial casting dispatch note
- Sent with the lot: the heat number, the test reports and what to check. Gives the buyer a reason to report back.
- Trial result request
- A message asking for the machining and inspection result, offering corrections if anything failed.
- Cause-and-fix reply
- A one-page reply to a dimension or porosity complaint naming cause, containment and the change made for the next lot.
Who it is for
This is written for these metal casting foundries.
- Grey iron foundries for machine tools, pump casings and brake parts
- SG iron and ductile iron foundries for valves, pipe fittings and auto parts
- Steel casting foundries for heavy engineering and railways
- Non-ferrous foundries for brass, bronze and aluminium gravity castings
- Stainless steel foundries for pumps and process equipment
- Shell moulding and resin sand foundries making precision castings
- Foundries with in-house pattern shop and machining
- Small jobbing foundries serving local engineering units
Before you decide
When this may not be the right fit.
- Nobody owns the quote after it leaves, so a reminder would be set and never sent.
- You do not log quotes with their drawing revision, so a follow-up could refer to the wrong version.
Before you decide
Agree the work. Know how to judge it.
Follow-up systems for foundries: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.
Make the scope clear
Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.
Check the work in use
Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.
Know when to change course
If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from metal casting foundries. Anything missing is noted in the written scope, with who will supply it.
- Quotations issued with dates and last contact
- A list of quotations with the date sent, the buyer and the last conversation. A spreadsheet or the sent folder is enough. Without it, we cannot tell which quotations are alive, and the first stage of the work becomes digging through chats and mailboxes to rebuild the list.
- The sales engineer's account of each buyer
- The person who visits the plants must tell us what was said about timing, approvals and any second foundry. Without this, follow-up messages are generic and may contradict what the buyer told the visitor, which is how a polite buyer becomes an irritated one.
- Dispatch records for recent trial castings
- The dates, quantities and any buyer feedback for recent trial castings. Without them the check-in has nothing to be pinned to, and the call becomes a general enquiry about whether the buyer has decided, which is the call purchase executives resent.
- Complaints and how they were closed
- Copies of past complaints with the replies and the fix, names hidden if you prefer. They shape the cause-and-fix format. Without them the format is written from theory and may not fit the records the quality head actually keeps.
- The standing order schedule
- The list of standing orders with the quantity, the call-off pattern and the contact at the plant. Without it the review calls cannot be planned, and a standing order drifts until a rival is already supplying part of the quantity.
How it works
How the follow up systems work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
List every quotation now waiting
We list each quotation issued and not yet answered, with the part, the buyer, the date issued and the last conversation. You tell us which are live and which have gone quiet. A buyer who is silent after a quote may be waiting on a pattern cost approval or a revised drawing, so each entry gets a status of its own and not a shared label.
- 2
Find out why each buyer has gone quiet
For each quiet quotation we ask the estimator or sales engineer what the buyer last said: the drawing is being revised, the budget is not approved, a second foundry is being tried. We record the reason beside the entry. The reason decides what the next call can usefully say, and an unknown reason becomes the first question to ask. The sales engineer who visited the plant last is the one who can tell us what was said at the gate.
- 3
Write the trial casting check-in
We write a check-in for the time after a trial casting is dispatched: what the buyer measured, which test was run and whether the machining allowance suited. The sales engineer makes the call, and the quality head joins if a defect is reported. A trial casting is a different conversation from a quote and needs its own routine.
- 4
Set the cause-and-fix reply for complaints
We write a format for answering a complaint: what the buyer reported, what the foundry found, the cause and the correction. You approve it. A foundry that answers a porosity complaint with a cause and a fix keeps the account, while one that disputes first invites a second vendor, so the reply is drafted before any complaint arrives.
- 5
Prepare the standing order review calls
For each standing order, we agree who checks the schedule with the buyer and what is asked: next quantity, drawing changes, delivery experience. Templates for WhatsApp follow-up are written for the buyers who prefer a message. An overdue list shows the account nobody has contacted, so standing orders do not drift into silence.
- 6
Read the accounts against the starting list
We compare quotations answered, trial castings converted and standing orders confirmed with the list of waiting quotations made at the start. You decide which follow-ups to keep and which to drop. No order is promised, since the buyer decides on the casting and on the pattern cost, not on the call. We list the follow-ups that produced a reply, so the team can see which kind of call a purchase desk welcomes.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
What is the right moment to chase a quotation?
Will follow-up annoy purchase heads?
When is a call about a sent quote welcome?
Will follow-up annoy purchase heads?
Should the owner or the sales engineer follow up on a quote?
What if a buyer says the order went to another foundry?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for metal casting foundries
Related work to consider.
Closest to this: leads and follow-up
Also for metal casting foundries
Or start from the overview: sales and marketing for metal casting foundries.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.