Metal casting foundries · Digital marketing
Put the foundry where a buyer looks: search, listings, email and the plant inbox.
Digital marketing for a metal casting foundry joins search, ads, listings, email and outreach into one effort aimed at plants that buy castings. GullySales decides which channels earn their cost for your alloys and weights and drops those that bring only rate checks.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What digital marketing means
Digital marketing is the combined work of search, social media, advertising and website channels running together rather than as separate projects with separate people. GullySales runs these as one connected system so a change in one channel, such as a new offer, is reflected everywhere at once.
Last updated 14 Nov 2026.
For metal casting foundries
Where it usually goes wrong, and what we would do.
“Channels differ in the quality of drawing they bring”
Search brings buyers who know the alloy. A marketplace brings a mix, some only comparing rates. Outreach brings the plant you chose. Judging channels by number of messages hides which one produces a trial casting.
“Ads suit the alloys with the best margin”
Paid search for every alloy burns budget on work that earns little. Ads for the grades and weights where the foundry is strongest, sent to a page that names them, meet the buyer who is ready to send a drawing.
“Email still reaches the purchase desk”
A well-aimed note with a capability sheet and a sample report is opened by a purchase head who is also searching. Bulk mail with no relevance is deleted, and a poor sender reputation hurts later messages too.
“A single measure ties it together”
Without one record of where each drawing started, a foundry credits whatever it saw last. Tagging every enquiry by source lets the owner stop paying for channels that bring only passing queries.
What we do
What we deliver for metal casting foundries.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
A channel plan for your alloys
A written choice of search, listings, email and outreach, matched to the alloys and plants you want.
Result: The reason for each channel is written down.
Search ads for chosen alloys
Campaigns and landing pages for the grades and weights with the best margin.
Result: Ad clicks land on a page that names the alloy.
Listing clean-up
Marketplace and directory profiles corrected to match your site, with alloys, sizes and testing stated.
Result: Your listings say the same thing everywhere.
An email sequence for plants
A short series of notes with a capability sheet, a sample report and a trial-lot offer.
Result: Each sent note has a purpose and a next step.
Tracking by source
Each enquiry tagged with its origin and its outcome in the enquiry log.
Result: You can compare channels by trial castings, not clicks.
A review of what to stop
A written list of channels that bring only rate checks, with the evidence.
Result: Spending shifts to what brings quantities.
How the result is measured
- Enquiries across channels
- Cost per enquiry overall
- Channel mix by contribution
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
What to count so each channel is judged by trial castings.
- Source of each drawing
- Search, listing, outreach, referral or repeat customer, logged when the file arrives.
- Alloy and weight of the enquiry
- Shows which channels bring the grades and sizes you want and which bring mismatched work.
- Quantity stated by the buyer
- Separates a rate check from a real requirement, so a channel is not credited for drawings with no order behind them.
- Quote sent and trial made
- Linked back to the source, so the channel is measured by trial castings and not by messages.
- Standing order from it
- The final result against the original source, entered by sales when a repeat order is confirmed.
Who it is for
This is written for these metal casting foundries.
- Grey iron foundries for machine tools, pump casings and brake parts
- SG iron and ductile iron foundries for valves, pipe fittings and auto parts
- Steel casting foundries for heavy engineering and railways
- Non-ferrous foundries for brass, bronze and aluminium gravity castings
- Stainless steel foundries for pumps and process equipment
- Shell moulding and resin sand foundries making precision castings
- Foundries with in-house pattern shop and machining
- Small jobbing foundries serving local engineering units
Before you decide
When this may not be the right fit.
- The foundry has no spare capacity for new alloys, so more channels would bring work it must decline.
- You cannot record where a drawing came from, so any paid effort would be impossible to judge.
Before you decide
Agree the work. Know how to judge it.
Digital marketing for foundries: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Bring a recent won order and an enquiry that went nowhere. Trace how each buyer found you, what they asked, and who handled the next step. A channel list alone will not explain the difference.
Make the scope clear
Choose one offer and one buyer group first. Agree which part needs attention: being found, getting a useful enquiry, or turning an enquiry into an order. Separate recommendations from the work required to carry them out.
Check the work in use
A useful plan names the first change, its owner, the evidence behind it, and the number that will show whether it worked. Ask what has deliberately been left out and why.
Know when to change course
If your team cannot answer the enquiries it already receives, improve that handover before buying more traffic. If the offer itself is unclear, test it with buyers before adding channels.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from metal casting foundries. Anything missing is noted in the written scope, with who will supply it.
- Capacity and margin by alloy
- A note of which alloys leave room in the furnace and moulding schedule, and which earn the best margin. A conversation with the production head is enough. Without it, ads could bring work the shop is too full to take, and a good buyer meets a slow reply.
- The enquiry register for the past year
- A list of drawings received over the past year with dates and where each came from, if known. A rough list is acceptable. Without it, there is no starting point, and every channel looks equal because nothing was counted.
- Logins for listings, site and analytics
- Access to the marketplace listings, the website and its statistics, or the names of whoever holds them. Without them, the listing clean-up and the tracking wait, and old claims about metals and weights remain live in places we cannot reach.
- A budget and a ceiling from the owner
- The owner decides how much goes into paid search and the ceiling for the test, including none. Without this, we plan only the unpaid channels, and the question of whether ads would have worked is left open for the next review.
- Records of consent for email contacts
- A note of how each contact agreed to receive email from the foundry, such as a saved reply or a business card note. Without it the list starts small and grows only with permission, which is slower and also the only list the foundry should hold.
How it works
How the digital marketing work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Rank the alloys by margin and spare capacity
We sit with the owner and the production head and rank the alloys and casting families by margin and by the furnace and moulding capacity left. You tell us where the foundry is full and where it is not. Marketing is aimed only at work the shop can take on and wants, since capacity is fixed.
- 2
Check what each channel brought in drawings
We go through the website, the marketplace listings, the email list and the posts, and ask the estimator which drawings each produced and what became of them. Channels differ in the quality of drawing they bring. Where nobody kept a count, we say so plainly and record one from now, using a column in the register that the estimator fills as each drawing arrives.
- 3
Clean up the marketplace and directory listings
We list the foundry's entries in trade directories and marketplaces and align the name, address, capabilities and contact to the website. You give us the logins. Old entries that promise metals or weights the foundry no longer pours are corrected or removed, because a wrong promise brings the wrong drawing.
- 4
Choose search ads for a few alloys
We pick the alloys where paid search suits, those with the best margin and spare capacity, and write the ads and landing pages around the grade and the part. The owner sets the budget and the ceiling. No ad runs for work the foundry cannot take, and each ad lands on a page that names the limits, so that a buyer with a part outside the weight range reads the limit before sending a drawing and not after the estimator has spent an hour on it.
- 5
Write the email sequence for target plants
We write a short sequence for the plants on the target list, each message tied to a casting the foundry makes and a question the buyer's role asks. Only contacts who agreed to receive it are sent the emails. The purchase desk still reads email, and the sales engineer checks every message against what the plant actually buys, so that a pump maker is not sent a note about brake drums.
- 6
Track by source and decide what to stop
We tag every drawing by source and compare drawings received, quotations issued and orders won with the register from the start. You see which channel brought work the shop could do. We then decide what to stop. No number of enquiries is promised, and the decision is recorded in writing.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Is digital marketing worth it for a foundry with fixed capacity?
How do we judge ad spend?
Is digital marketing worth it for a foundry with fixed capacity?
How do we judge ad spend?
Do marketplace listings still matter for a foundry?
Should we advertise alloys we are already full on?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for metal casting foundries
Related work to consider.
Closest to this: strategy and research
Also for metal casting foundries
Or start from the overview: sales and marketing for metal casting foundries.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.