Skip to content
GullySales

Metal casting foundries · Website

A foundry website is a capability sheet a purchase engineer can check at their own desk.

A website for a metal casting foundry is the place a buyer confirms alloys, weights, process and testing before sending a drawing. GullySales plans the pages, writes them with your engineers and sets up a clear route for drawings to reach the right person.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For metal casting foundries

Where it usually goes wrong, and what we would do.

  • “The buyer checks the site before calling”

    After a colleague's recommendation or a search, the purchase executive opens your site to confirm that you cast their alloy and weight. If the answer is hidden or absent, the call is never made and you never learn of the loss.

  • “Finished work sells more than raw metal”

    A machined valve body or housing shows capability that a ladle image cannot. The site should lead with parts as the buyer receives them, with notes on alloy, process and machining allowance beside each.

  • “Testing needs its own place”

    Spectrometer analysis, mechanical tests and inspection methods are why a buyer trusts a first lot. Spread across the homepage they are skimmed. On a dedicated page, with a sample report, they answer the quality engineer's questions in one visit.

  • “The drawing form decides whether enquiries arrive”

    A contact form asking for name and message gets vague messages. A form that accepts a drawing file and asks alloy, weight, quantity and machining brings enquiries you can quote. An overlong form stops buyers, so the questions must be few and exact.

What we do

What we deliver for metal casting foundries.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A site plan built around alloys

    Pages for each alloy family, a machining page, a testing page, a pattern page and a contact route.

    Result: A buyer reaches their alloy in two steps.

  2. Copy written with your engineers

    Plain, specific wording on grades, weight range, moulding method and parts, checked by your quality head.

    Result: Every claim on the site is one your team can defend.

  3. A drawing submission form

    A form that takes a file and asks the questions your estimator needs.

    Result: Enquiries arrive with what you need to quote.

  4. A compliance and approvals page

    A short page describing approvals held, in general terms, with documents ready on request.

    Result: You answer a compliance question with a link.

  5. Photograph direction

    A list of shots to take: patterns, moulds, test bench, finished and machined parts, with captions.

    Result: The gallery shows what you cast, not only fire.

  6. Mobile and speed checks

    Pages checked on a phone, since purchase people open links on a handset.

    Result: Pages load and read cleanly on a handset.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

Pages that let a purchase engineer check the foundry at their desk.

does this foundry cast my alloy
A capability page listing grey iron, SG iron, steel and others with the grades, weight range and moulding method.
how are the castings tested
A testing page naming the spectrometer, mechanical tests and inspection, with a blanked sample report.
foundry with machining
A machining page showing finished parts, the machines used and the tolerance range your shop holds.
pattern making and storage
A pattern page covering materials, ownership, storage and repair, set out in plain terms.
send a drawing to the foundry
A form that takes the file with alloy, weight, quantity and machining, so the first reply starts from a complete enquiry.

Who it is for

This is written for these metal casting foundries.

  • Grey iron foundries for machine tools, pump casings and brake parts
  • SG iron and ductile iron foundries for valves, pipe fittings and auto parts
  • Steel casting foundries for heavy engineering and railways
  • Non-ferrous foundries for brass, bronze and aluminium gravity castings
  • Stainless steel foundries for pumps and process equipment
  • Shell moulding and resin sand foundries making precision castings
  • Foundries with in-house pattern shop and machining
  • Small jobbing foundries serving local engineering units

Before you decide

When this may not be the right fit.

  • You cannot yet state your weight range and grades with confidence, and a site would repeat vague wording.
  • The site is edited only by an outside agency that is slow to respond, so every correction would wait.

Before you decide

Agree the work. Know how to judge it.

Website for foundries: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from metal casting foundries. Anything missing is noted in the written scope, with who will supply it.

Weight, section and grade limits
The smallest and largest weight, the section range and the grades poured. A page without them is skipped by the buyer who is checking whether the part fits. If the limits are not written down, the moulding foreman states them and we record the answer.
Test reports and approvals, names removed
Sample test reports and the foundry's approvals and registrations, with customer names hidden. Without them the compliance page is empty, and a quality engineer who looks for evidence finds only claims. If an approval is held by a customer and not by the foundry, say so, and we will not describe it as the foundry's own certificate.
Photographs cleared for publication
Pictures of castings, the pattern shop and the inspection bench, cleared where a part is recognisable. Phone pictures in daylight are acceptable. Without them the site is short of finished work, which is what sells more than raw metal.
Domain and hosting logins
The domain registrar and hosting access, or the names of whoever holds them. A forwarded renewal notice shows this. Without them launch waits while we trace the owner of the address, and the old site stays live.
An estimator to receive the form
A named estimator who will read and answer each drawing sent through the form, and a cover. Without one, drawings wait in a mailbox and the form gains the foundry nothing. The buyer who sent a drawing and heard no acknowledgement assumes the foundry is not interested and sends it to the next name on the list.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the present site as a purchase executive

    We read the current site as a purchase executive checking a foundry before a call would, looking for grades, weight range, testing and a way to send a drawing. We write down every point where the reader is left to guess. You tell us what a buyer must find on the first screen, and we compare that with what a stranger on a phone actually sees in the first moments, which is a company history and a banner.

  2. 2

    Plan the site around alloys and castings

    With the owner, we draw a site plan with a page for each alloy and casting family, a page for machined castings, a testing page and an approvals page. You decide which families are shown first. The plan follows what buyers search for and not the history of the company.

  3. 3

    Write the copy with the metallurgist

    We sit with the foundry's metallurgist and sales engineer and write each page: the grades, the weight and section limits, the moulding method and the tests. The metallurgist corrects every figure. Finished work sells more than raw metal, so machined castings come with a page of their own.

  4. 4

    Direct the photographs

    We plan a short photo session at the foundry covering finished and machined castings, the pattern shop, the inspection bench and the dispatch bay, with a list of what to avoid. Customer parts are shown only with permission. Each photograph goes beside the text that explains it, with a plain caption naming the metal, the process or the test shown, so that a quality engineer reading the page does not have to guess what the picture proves.

  5. 5

    Build the drawing submission form

    We design a form that asks for the drawing, the grade, the yearly quantity, the weight and whether a pattern exists, and sends the answer to a named estimator. The owner decides who reads it. The form decides whether enquiries arrive, so we test it with a real drawing from the files, sent from a phone, and check that the estimator receives the file with its revision intact. A form that rejects a large drawing file loses the buyer at the last step.

  6. 6

    Test on phones and read enquiries after launch

    We check the site on phones and for speed, launch it, and compare the drawings received with the count noted from the old site. You tell us which were real castings the shop could pour. We then decide what to add. No number of enquiries is promised.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should the site show our customers' names?
Only with their written permission. Where permission is absent, describe the industries served, such as pump, valve or tractor makers, without naming the plant.
Can the existing site be built on, or should it be replaced?
We read the existing site first. If its structure can carry alloy and testing pages, we build on it; if not, we say so and plan a rebuild with you.
Should the site show our customers' names?
Only with the customer's written consent. Some buyers prefer silence about their sources. Describe the sectors and parts you serve, and show customer names only where permitted, since a name shown without consent can cost you the customer.
Is it better to edit the old site or start again?
The old one can be rebuilt around alloys, testing and a drawing form when it is editable. A new site makes sense if it cannot be edited or fails on a phone. Judge by whether a buyer can find their alloy and weight in two steps.
Can the site show our price per kilogram?
We advise against it. The rate depends on the grade, the weight, the quantity and the pattern, so a figure on a page misleads the buyer and invites comparison with a foundry quoting for a different part. The site says what the quotation covers and how to send a drawing, and leaves the rate to the estimator.
Will a new site lose our present search visits?
Not if it is done with care. We list the pages that bring visitors now, keep their addresses or send them to the nearest new page, and check the result after launch. Pages that have no visitors and no purpose are removed. The starting record shows what to protect before anything changes.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

More for metal casting foundries

Related work to consider.

Closest to this: search and visibility

Or start from the overview: sales and marketing for metal casting foundries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.