Skip to content
GullySales

Printing businesses · RFQ management

Every rate request should reach one place and leave the press with one answer.

For a print shop, RFQ management means every request for a rate, whether it comes by WhatsApp, email, a marketplace inbox or the counter, is logged, checked for the job details and answered in one standard way. GullySales builds the register, the checklist and the reply standard with your team, and prices stay with you.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of printing businesses at work in India

What RFQ management means

Request for quotation (RFQ) management is the handling of every buyer request from the moment it arrives to the recorded decision: one intake point, a completeness check, a reply standard and a record of why you won or lost. GullySales sets up that routine with your team, builds the register and the handoff into your CRM or ERP, and leaves prices and approvals with you.

Last updated 14 Nov 2026.

For printing businesses

Where it usually goes wrong, and what we would do.

  • “A rate request is half a job description”

    A message that says send rate for 1000 brochures is not a request a press can price. Size, paper, number of pages, colours, finish, binding, delivery place and date are all missing, and every one of them moves the price. Without a checklist the estimator guesses, the buyer compares a guess with a firm figure from another press, and the shop loses a job it could have won.

  • “Requests land on whoever holds the phone”

    A counter assistant gets one request, the owner gets another on WhatsApp, a marketplace inbox collects a third and an email address nobody checks collects a fourth. No single person knows how many requests came in this week or which are still waiting. A single intake route and a reference number give each request a record before anyone opens a rate book.

  • “Two people quote two prices for the same job”

    One person quotes from memory of the last similar job, another works from the paper rate list, and the buyer receives two figures for one carton. Trust goes before the order does. The reply standard names who may send a price, what the reply must contain and which rate book it draws from, so the buyer hears one answer from the shop.

  • “A lost request leaves no lesson”

    When a buyer goes quiet, the file closes without a reason. Was the price high, the delivery date wrong, the stock unavailable or the reply late? Nobody wrote it down, so the shop loses the same way next time. Outcome codes and a short reason in the buyer's own words turn each lost request into something the owner can read.

What we do

What we deliver for printing businesses.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. One intake route and request numbers

    A shared mailbox or form, with a rule for bringing WhatsApp messages, marketplace enquiries and counter requests into it. Each one is given a reference number and a named owner on arrival, so nothing sits in a personal phone unlogged.

    Result: You can pick any request and say which channel it came through and who owned it.

  2. Print job completeness checklist

    A short list of what a request must contain before pricing: finished size, stock and weight, number of colours, finish such as lamination or foil, quantity, artwork status, delivery place and the date the buyer needs it. A missing item goes back with a standard question.

    Result: You can see which requests were returned for detail before an estimate was begun.

  3. Triage rules set by the owner

    Written rules for which requests are priced the same day, which go first to the production head for a feasibility check, which need artwork seen and which are declined. The owner decides the rules; we write them down and test them on live requests.

    Result: You can read the rules and match any decline to the rule that caused it.

  4. RFQ register

    A shared sheet, or a view in your CRM, listing reference, buyer, channel, date received, owner, status, version of the rate sent and the outcome. It replaces the memory of whoever happened to read the message and shows open requests at a glance.

    Result: You can count requests received, answered, open and closed without asking anyone.

  5. Reply standard and quote version record

    A written standard for what every reply contains: acknowledgement, questions, the rate with its assumptions and the validity of the paper price. Each revised rate is numbered so a new figure never overwrites the one the buyer holds.

    Result: You can tell which version of a rate a buyer was given and what it assumed.

  6. Outcome codes and reasons

    Agreed codes for won, lost on price, lost on date, lost on stock, declined and no reply, plus a line in the buyer's own words. Your sales lead reads the grouped reasons and decides what to change in the offer or the process.

    Result: You can list the reasons behind recent losses and see which repeat.

How the result is measured

  • Requests received through the single intake route, by channel
  • Requests with a named owner and a reference number
  • Requests returned to the buyer for missing detail before pricing

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these printing businesses.

  • Commercial offset printing businesses
  • Digital and quick-print shops
  • Packaging and label printing businesses
  • Large format and signage printers
  • Wedding and event stationery printers
  • Corporate stationery and print suppliers
  • Textile and garment printing businesses
  • Print-on-demand and personalised merchandise printers

Before you decide

Agree the work. Know how to judge it.

RFQ management for printing businesses: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring the current target, pipeline, and review format. Mark which decisions the manager can make and which still require the owner's approval.

Make the scope clear

Agree decision rights and the management routine, including who runs it after the engagement. Separate advice to your sales head from taking responsibility for an agreed part of the operation.

Check the work in use

A useful review ends with an owner and next action for the deals or constraints discussed. Revisit those actions before adding more dashboard measures.

Know when to change course

If a review only collects updates already available in the CRM, shorten it. Use the time to resolve a blocked decision or coach a specific piece of selling work.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from printing businesses. Anything missing is noted in the written scope, with who will supply it.

A sample of recent rate requests
The checklist and register are drawn from requests your shop actually received, in whatever state they sit. Screenshots of WhatsApp threads, forwarded emails and counter notes are fine. Without them the checklist describes an ideal buyer and misses the gaps that really hold up your estimates.
A list of every channel requests use
Requests reach your shop by phone, messaging apps, email, marketplace listings and the counter. Each needs a route into the register. A rough list from the team is enough. Any channel left off stays invisible, and the register then shows only part of the picture.
One person who owns the register
A register stays accurate only when one named person keeps it and chases gaps. This can be a counter coordinator or the sales head. Without an owner, entries lapse and the team returns to answering from memory within a short time.
Your rate book and its rules
Estimates draw on paper prices, plate or setup charges, finishing rates and delivery. Bring the book as it is, with the rules for when an exception is allowed. Without it, we cannot write a reply standard, and your staff keep quoting from different sources.
Your reasons for declining a request
Triage rules need the grounds on which you already turn work away, such as a size the press cannot take, a stock you do not hold or a delivery date you cannot meet. A short note is enough. Without it the rules are invented by GullySales and do not reflect your judgement.

How it works

How the RFQ management work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Gather recent requests from every channel

    You share requests from recent months from WhatsApp, email, marketplace inboxes and counter notes, with the outcome where it is known. We map how each one arrived, who touched it and where it stalled. This also gives us the count of requests before the new route begins.

  2. 2

    Record the figures before changing anything

    We note how many requests had a named owner, how many arrived complete and how many closed with a reason. These are the starting figures. Without them nobody could later say whether the new route improved on the old one or simply felt tidier.

  3. 3

    Agree the rules with owner and estimator

    Your owner and sales lead decide the intake route, the triage rules and the reply standard. The estimator confirms what a request needs before pricing, and the production head defines the jobs that need a feasibility check on the machines before any rate leaves the shop.

  4. 4

    Build the register and the checklist

    We draft the register, the print job checklist and the standard questions for missing detail, in the words your counter staff already use. Open requests are loaded first, each with an owner and a next step, so the register begins with real work and not an empty sheet.

  5. 5

    Run live requests through the route

    Your team handles its next real requests through the new route, with us reading alongside. We note where a step was skipped and correct the checklist or the rules. A step that is skipped every time is a step that was badly designed, and we fix it.

  6. 6

    Connect, review and hand over

    We map the register to your CRM or job-card fields, and your system owner approves the map before any field changes. A named person then owns the register. Your sales lead reads the outcome reasons with us against the starting figures, and any change to rates or rules is yours.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need software for RFQ management?
No. A shared sheet and a shared mailbox are enough to begin. If your shop already uses a CRM or a job-card system, we map the register to its fields so the same data is not typed twice. Your system owner approves that map, and GullySales does not change fields in your system on its own.
Will you price our jobs or decide which requests to decline?
No. Costing, discount limits and the choice to decline stay with your owner and estimator. We write your rules down, test them on live requests and show where staff step outside them. A register shows where requests are lost; it does not win them, and the reply remains yours.
What about requests that arrive on a salesperson's personal phone?
Those are the ones the register is built to catch. The rule is that any request received anywhere is entered under a reference number before it is answered, and the owner agrees how staff pass it in. We read the register against the team's phones in the first live round and adjust the route.
How is this different from quotation management?
Quotation management is the quotation document itself: template, numbering and approval. RFQ management sits before it, handling arrival, the check on detail, triage and the record of the outcome. Quotation follow-up begins after a rate is sent. If you need more than one, we scope each separately in writing.
Can the register show which marketplace listing brings real jobs?
Yes, where the channel is recorded on each request and the outcome is recorded at the end. The register then shows requests by channel next to orders traced back to a numbered request. Whether to keep or drop a listing remains your decision, and the figures only reflect what your team enters.
What do you read to judge whether it is working?
The figures recorded before the work began, set against the new register: requests with a named owner, requests returned for missing detail, replies that follow the standard and closed requests with a reason. Those counts come from your own records, and we read them with your sales lead.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.