Skip to content
GullySales

Welding fabrication companies · Website

Build a site that tells a plant engineer what you weld, in what, and how it is checked.

A website for a fabricator is the page an engineer or purchase team opens to check you before sending a drawing. GullySales works on its structure, the job-type pages, the proof you show and the simple route to send a drawing or ask for a visit.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Fabrication supervisor discussing welder skills and work standards

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For welding fabrication companies

Where it usually goes wrong, and what we would do.

  • “A welder's photo is not a capability statement”

    A buyer needs to see materials, thickness range, processes, equipment and industries served. A site that shows a picture and a phone number leaves the buyer guessing, so they call the next shop.

  • “The document pack belongs on the site”

    Welder records, procedures and inspection methods are what a tender reader checks. A page that presents them, with a contact for the full pack, saves both sides a round of emails.

  • “A drawing needs an easy way in”

    Buyers want to send a PDF or a photo. A form that accepts a file with material, quantity and site gets a usable enquiry, where a bare contact form gets a vague message.

  • “Mobile matters on the shop floor”

    A maintenance head opens the site on a phone beside the broken part. Pages must load, read well and offer a call button without pinching and zooming.

What we do

What we deliver for welding fabrication companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Site structure

    A clear structure with a page for each job type, a capability page, a work gallery and a contact route.

    Result: Every page has a purpose and a link to enquire.

  2. Job-type page copy

    Writing for each page with your engineers: materials, processes, thickness and industries served.

    Result: Each page states what you weld and for whom.

  3. Capability and proof page

    Equipment, qualification records and inspection methods set out for a buyer to scan.

    Result: A buyer finds equipment and inspection details in one place.

  4. Drawing upload enquiry

    A form accepting a drawing with material, quantity and location, and sending it to the estimator.

    Result: Enquiries arrive with a drawing and key facts.

  5. Mobile-first build

    Pages built to read and act on from a phone, with a visible call and WhatsApp button.

    Result: The site works on a phone at the plant.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

These are the searches a fabrication shop's site should answer.

fabrication shop capability statement
A page listing materials, thickness range, processes, equipment and industries served, with a download for the purchase file.
stainless steel tank fabricators
A job page with tank photographs, grades, finish and test options, and a form for a drawing.
welder qualification records
A page explaining what records you hold and a request form for the document pack. It shows buyers you are ready to be checked.
site visit for fabrication quote
A page describing what the estimator measures on a visit and what the buyer should prepare.
fabrication unit address and gate
A contact page with plot number, map pin, gate for vehicles and working days.

Who it is for

This is written for these welding fabrication companies.

  • Structural steel and platform fabricators
  • Stainless steel tank and vessel fabricators for food, dairy and pharma
  • Pipe spool and piping fabrication shops
  • Machine frame and base fabricators for OEMs
  • Heavy fabrication for cement, steel and power plants
  • Aluminium and stainless welding for kitchens and architectural work
  • Maintenance and shutdown fabrication contractors
  • Trailer, tipper and truck body builders

Before you decide

When this may not be the right fit.

  • You have no cleared photographs of finished work, so the site would carry only stock images.
  • Your equipment list is out of date, so the site would promise capacity that is not there.
  • Nobody monitors the enquiry form, so a better site would send buyers to an empty inbox.

Before you decide

Agree the work. Know how to judge it.

Website for welding fabrication companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from welding fabrication companies. Anything missing is noted in the written scope, with who will supply it.

Registrar and hosting logins
Held by the owner or recovered from whoever set up the old site. Without them we cannot point the domain, and launch is blocked. If the domain was bought by a vendor in their own name, tell us now, as moving it takes some correspondence.
A copy of the shop's document pack
The papers you send with a quote: capability sheet, procedure and welder records, certificates. They show what the capability page can claim. If a paper is absent, the page leaves it out. Include the old quotation format too, so the page matches what a buyer later receives.
A shot list of the bays and equipment
Photographs of each bay, cranes, machines and finished work, taken in daylight. They show scale. Without them the site relies on stock images and loses credibility. Add the crane, the press brake and the cutting table, because buyers read equipment as capacity.
Three jobs written up by your engineer
Short notes on the problem, build and check for three jobs. They become the proof section. If unavailable, the section stays thin. Choose jobs that show different work, such as a vessel, a platform and a frame, so the section is not a single story.
A decision on client names
Which clients may be named, in writing. We never add one on our own. If undecided, the site shows job types without names. A client who has agreed informally still needs to confirm in writing before the name appears.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Walk the shop and list proofs

    We visit the shop with the owner, looking at the bays, the stores, the inspection corner and the documents on the office wall. You tell us what a plant engineer asks to see first. The site map that follows is built around those proofs, not around a standard menu. We photograph the stores and the quality corner too, because purchase teams look for evidence of material traceability and inspection before they look at price.

  2. 2

    Hand over domain, hosting and old site access

    We ask for the domain registrar login, the hosting details and the current site's admin, and note anything held by a former agency. You decide who owns what going forward. Once we have access, we copy the old site, so nothing already there is lost. We also list the job-type pages, with the processes and materials each needs, so structure is settled before design starts. We also check whether the old site has pages that still bring calls, so they are carried across and not lost in the move.

  3. 3

    Write the capability page with the document list

    We draft the capability and proof page: bay sizes, processes, inspection methods and the papers you can send, such as procedure and welder records. Your engineer checks each claim. A document you cannot produce is not listed, and a client name appears only if the client has agreed. The page also has a short list of questions a purchase team asks, such as bay size and material traceability, answered in plain words. We write the page for each job type at the same time, in the order of the menu, so the buyer finds the next step on every page.

  4. 4

    Build and phone-test the drawing upload

    Our developer builds the enquiry form that accepts a drawing, a material and a site location, and we send test files from a phone on a poor connection. You test it yourself. Failures on mobile are corrected before the test site is shown. We also try a large drawing file, since site engineers send heavy PDFs and the form must not reject them.

  5. 5

    Approve the test site, then launch

    You read the test site page by page, change what is wrong and give a clear yes. Only then does the site replace the old one, with redirects from the old pages. We check the live site and the form before handing over logins. A purchase officer reading the quote on a desktop and an engineer reading on a phone at the site should both reach the same facts, and we check both.

  6. 6

    Set new visits and enquiries beside the old site's

    We compare visits to job pages, drawing submissions and calls with the figures recorded from the old site. You tell us which enquiries became quotes. We decide which pages need more material, and who in your shop updates them. We also add the new site to Search Console and set up the redirects from the old addresses, so earlier links keep working and nothing already earned is lost.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need to name clients on the site?
No. Describe the job type, material and industry, and name a client only with their agreement. Some plants prefer not to be named.
Can you reuse our existing site?
Parts of it can stay. We look at what is there, keep what works and rebuild the structure and pages that do not answer a buyer's questions.
Who updates the site after launch?
Your team should be able to add a job write-up or a photo without a developer. We set it up so routine changes are simple.
Can we put client names on the site?
Only with the client's written permission. Some plants keep suppliers confidential for security or commercial reasons. Describe the industry and the job instead, such as a dairy tank, and ask the client in advance if you wish to name them.
Which client names are safe to show?
Only with the client's written agreement. Plants and EPC firms may forbid it, and a site that names a client without leave can harm the relationship. We ask you for a list of clients who have agreed. Everyone else appears as a job type, such as a dairy tank for a food plant, with no name attached.
After launch, who keeps the pages current?
Agree this before launch. Either someone at your shop adds new job photographs and notes through a simple editor we set up and train them on, or we do it for you as a separate arrangement. Whichever you choose, a name is written against the task, because a site that never changes loses its search position.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.