Skip to content
GullySales

Window manufacturers · CRM

Keep every window enquiry, measurement and quote in one record someone can open.

A CRM for a window manufacturer is the one place that holds each enquiry, the measurement, the quote versions, the site visit and the installation. GullySales works on setting up the stages, the fields and the habits that keep it current.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Windows and doors companies: show a real physical business scene illustrating Opening-wise measurement sheet. Record each opening with width, height, opening type, floor, location and a photo, taken on the surveyor’s phone at site.

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For window manufacturers

Where it usually goes wrong, and what we would do.

  • “A window order has a long chain”

    Enquiry, measurement, quote, revision, order, factory, delivery, fitting and snag visit pass through several people. Without a shared record, each handover is a phone call, and details such as the glass change are lost.

  • “Quote versions confuse everyone”

    A homeowner asks for the sill to change, the mesh to be added or a grille removed. Three versions later, nobody knows which one was agreed. The record must show the version, the change and who approved it.

  • “Showroom visitors vanish”

    People look at samples, take a brochure and leave. If the salesperson does not enter a name, a number and the window they liked, there is nobody to call when the visitor has had time to think.

  • “Builders and dealers need an account view”

    A developer with several towers, or a dealer with several leads, is not a single enquiry. They need a record of every contact, sample, quote and delivery, so whoever calls knows the history.

What we do

What we deliver for window manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Stage design

    Stages matching your work, from enquiry to measured, quoted, ordered, delivered, fitted and reviewed.

    Result: Each enquiry sits in one stage that the whole team agrees on.

  2. Fields for window work

    Room, opening count, material, glass, hardware, colour, site address and measurement date held in set fields.

    Result: The factory receives every needed detail without a chasing call.

  3. Quote version log

    Each revised quote saved with the change and the approval.

    Result: You can tell which quote the buyer accepted.

  4. Showroom visitor entry

    A one-minute entry for each walk-in, with the window type they looked at.

    Result: Every showroom visitor can be called back.

  5. Builder and dealer accounts

    Records that group the contacts, sites, samples and orders of one builder or dealer.

    Result: One screen shows a builder's whole history with you.

  6. Team habits

    A short routine for who enters what, and when, with a simple check of overdue records.

    Result: Records stay current because the entry points are agreed.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The fields a window maker needs on each enquiry, measurement and order.

Opening list with sizes and type
Filled by the measurer on site. It lets the factory cut to the right size and shows later what was ordered if a window is disputed.
Quote version and date
Filled by the sales lead each time a quote changes. It ends the argument over which price the buyer was shown.
Buyer type and decision-maker
Filled at the first call. It separates the homeowner from the builder's purchase head and tells the next caller who to speak to.
Site stage and fitting date
Filled by the coordinator. It shows whether the building is ready for fitting and prevents a crew arriving at unplastered walls.
Complaint and rework note
Filled by the installer or service lead. It records a leak or a fit problem and its cause, so the pattern reaches the factory.

Who it is for

This is written for these window manufacturers.

  • uPVC window manufacturers
  • Aluminium window and sliding door makers
  • Aluminium extrusion system suppliers to fabricators
  • Wooden window and teak frame makers
  • Fixed glass, curtain wall and structural glazing fabricators
  • Fire and acoustic window specialists
  • Mosquito mesh and safety grille window makers
  • Manufacturers with their own dealer and installer network

Before you decide

When this may not be the right fit.

  • Your measurement sheets are on paper in a vehicle and nobody will enter them, so a system would show only the first call
  • You handle a handful of orders in a month, and a shared sheet still keeps every quote and date in view

Before you decide

Agree the work. Know how to judge it.

CRM for window manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from window manufacturers. Anything missing is noted in the written scope, with who will supply it.

Measurement sheets and a sample quote
Bring a few measurement sheets and quotes in their current form. They show the fields the system needs. Without them, fields are guessed, and the first week of entry shows what is missing.
The lists you keep in registers or sheets
Collect the enquiry register, the order list and the builder list, however they are kept. We load a test batch from them. Without them, the system opens empty and staff keep the registers beside it.
An owner for the system
Name one person who adds users and changes stages. They need not be technical. If nobody is named, the system drifts from the way the team works within weeks.
A decision on who may see rates
Decide which staff can see the rate and discount on a quote and which see only the status. Only you can set this. Without a rule, we restrict rate visibility, and a salesperson may be unable to answer a buyer.
A list of dealers and builders by account
Write the builders and dealers you serve with their projects. The account view uses it. Without the list, each project is entered as a separate customer and the total relationship is invisible.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one window order from call to fitting

    We take one finished order and follow it through every record you hold: the first call, the measurement sheet, each quote version, the site visit and the installation date. You tell us where each paper sits. We write the stages as they happened. What exists afterwards is the order chain in your own sequence, which the system then follows. You see the chain written on one page, with the gaps marked, such as a quote that has no date or a measurement with no owner.

  2. 2

    Decide the stages and who owns each

    From the chain we set the stages, such as enquiry, measured, quoted, revised, ordered, in production, fitted, and name the person responsible at each. You remove stages nobody uses. The result is a small set that your team recognises as its own work.

  3. 3

    Add the fields a window order needs

    We add what your quote depends on: number of openings, material, window type, glass, colour, floor and wall condition. You decide which fields are required before a quote can be made. Fields nobody reads are cut so that entry stays fast on a phone.

  4. 4

    Set up the quote version log

    We build a place where each version of a quote is kept with its date, what changed and the reason. Your sales head decides who may issue a revision. When a buyer says the earlier rate was lower, the desk can show what changed and why.

  5. 5

    Enter showroom visitors and builder accounts

    We create a quick entry for walk-ins at the showroom, so a visitor is recorded before leaving, and an account view for builders and dealers that gathers all their projects. You choose who fills the entries. A test day shows whether the showroom desk uses them. We also set a rule for what a desk member does when a visitor leaves without giving a number: the entry is still made, with the product looked at, so the showroom's footfall is counted.

  6. 6

    Train the team on live orders and check habits

    We sit with the sales desk and the measurement team and enter real orders together. You see where staff skip a step and we adjust it. We then compare the record with the old registers to see what is still outside the system. The check shows whether the desk can answer a buyer's question from the screen.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should a window maker pick?
Pick the one your team will open every day. For a small maker a simple tool or well-built sheet does better than a heavy system nobody enters. We help choose, then set up the stages around how you work.
Can the CRM connect to our measurement sheets?
It can hold the measurement sheet as an attachment on the record, and key fields in the record itself. Tying it into factory software depends on what you run, so we look at that before promising anything.
Can the CRM hold drawings and measurement sheets?
It can attach the final sheet and a photograph of the opening to the order. Keep the working drawing in your design tool and link it. Attaching every draft makes the record hard to read, so store only the version that went to the factory.
How do dealers appear in the record?
As accounts with their own contacts, orders and complaints, separate from end customers. Mark which end buyer each order serves where known. This shows which dealer sells your system well and which one needs training before it damages your name.
Who enters the data when the sales desk is busy?
The person who had the conversation enters it, at the end of the call or the visit, even if only a few fields. A second person entering later loses detail and is rarely done. We keep the required fields short so that entry takes a minute or two, and allow the rest to be filled in later. Your sales head should check the record at a fixed point in the week. If entry is routinely skipped, we shorten the form and do not add pressure.
What happens to enquiries already in our registers?
We load the live ones into the system and archive the old ones. Enquiries from the current season, open quotes and active builders are entered with their stage. Old closed enquiries are kept in a separate list for later reference, so they do not crowd the screen. Your team decides what counts as live. We test the import on a small batch first, and the original registers are kept untouched until you are satisfied that nothing has been lost.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.