Skip to content
GullySales

CNC machining companies · Social media

Post the part that came off the machine this morning.

For a CNC machining company, social media is the part that came off the machine this morning, photographed with the material and the tolerance written beside it. GullySales collects a month of those photographs on one visit to your shop and posts them on LinkedIn, where a procurement engineer scrolls between meetings.

A 90-minute audit call and a written, scored report. Turnaround, reporting and term are agreed in writing after the audit.

A community noticeboard under a small pitched roof, posters layered four deep, with a fresh notice just pinned over the corner of an older one

What social media means

Social media is the ongoing posting your business does on platforms such as Instagram, Facebook and LinkedIn to stay visible to customers and prospects between purchases. GullySales plans a posting calendar, writes captions and designs the images so the page looks active and answers what a visitor would ask.

For CNC machining companies

Where it usually goes wrong, and what we would do.

  • “The argument about a tolerance is the post”

    A drawing arrives with a tolerance in microns that the part does not need, you ring the customer, and the price comes down. Written up without naming anyone, that is the post a design head stops on.

  • “The job you turned down says more than the ones you won”

    A shop that explains why it refused a thin-wall aluminium run at that quantity sounds like a shop that knows its own machines. The buyer remembers it when a job does fit.

  • “A phone held against the enclosure window beats a film crew”

    Thirty seconds of a five-axis cutter working, coolant on the glass, says more about your capability than a drone shot of the building. Nobody in this trade watches the drone shot twice.

What we do

What we deliver for CNC machining companies.

Every deliverable, what it covers for you, and the result it is there to produce. Nothing here is an extra.

  1. One photograph a week, taken at the machine

    A person on the floor is shown what to shoot and when: the finished part on the bed, the setup, the first article on the inspection table.

    Result: The account runs on your own work instead of stock pictures.

  2. Captions written by someone who can read a drawing

    Each post names the material, the process and the tolerance held, so a buyer can judge in seconds whether you machine what they buy.

    Result: The engineer who matters stops scrolling.

  3. The enquiry you did not quote, once a month

    A short post about a job that went elsewhere and why, written plainly and without a complaint about price.

    Result: Fewer wrong enquiries arrive, and the right ones arrive better briefed.

  4. A page that matches your vendor registration form

    Machine list, inspection capability and certificates kept current on LinkedIn, checked against what your quality documents already state.

    Result: A buyer comparing the two finds the same shop in both.

  5. RFQs traced back to the post that brought them

    Every enquiry that mentions LinkedIn recorded in your CRM and reported at the agreed interval against the baseline taken before the work started.

    Result: You know whether an hour of posting is worth the hour.

How the result is measured

  • Posts published
  • Engagement rate
  • Enquiries from social profiles

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these CNC machining companies.

  • Job shops doing contract machining
  • Precision component manufacturers
  • Auto ancillary machining suppliers
  • Aerospace and defence component machinists
  • Machine shops serving medical device makers
  • Prototype and low-volume machining shops
  • Sheet metal and fabrication shops with CNC capability
  • Export-focused precision machining units

Not for

It is not the right fit if.

  • You want a guaranteed Google ranking or a guaranteed number of leads. Nobody honest can promise either.
  • You need enquiries by next week and have nobody to answer them.
  • You want posts and reach reported, not enquiries and orders.

How it works

From your first message to the first report.

No open-ended retainer. Each step has a point in time and something you receive.

  1. 01 · Day 1

    Free audit call

    90 minutes with whoever handles your enquiries: how they arrive, how fast they are answered, where they are lost.

  2. 02 · After the call

    Written, scored report

    Six areas scored, fixes ranked by return and cost. If you want our help, the scope, the fee and the reporting come with it, in writing.

  3. 03 · Before work starts

    Baseline recorded

    Enquiries by source, reply time, conversion and cost per order, written down so every later month has an honest comparison.

  4. 04 · Month 1

    The first fix goes live

    Usually the cheapest one on the report: reply time, a follow-up sequence or the marketing-to-sales handover.

  5. 05 · As agreed

    Report against the baseline

    What moved, what did not, and what changes next, in plain words. How often you get it is set in writing before work starts.

  6. 06 · At the end of the term

    Renew on the numbers

    The term ends and you decide whether to continue from the results. The length is agreed in writing before anything starts.

How the work runs for CNC machining companies

  1. 1

    Assess

    We look at how clear your capability page is, how long a quote currently takes to go out, and where your enquiries actually come from.

  2. 2

    Build the capability page and the quote routine

    Pages that list materials, tolerances and machine capacity clearly, and a same-day acknowledgement routine for every RFQ that arrives.

  3. 3

    Get found for the exact capability

    Search visibility and directory presence built around the specific machining, material and tolerance searches your buyers actually run.

  4. 4

    Bring buyers in

    Search, IndiaMART and targeted outreach for the segments you want, backed by a portfolio of past work buyers can check.

  5. 5

    Keep the account

    A call after every quote and every delivery, plus a note of each rejection's cause so the same fault is not shipped twice.

Proof

What happened when owners fixed this.

Real clients, the work we did, and the result as it was recorded. Where no number was recorded, none is claimed.

All case studies
  • SB Engineering

    Situation
    Buyers searching for laser cutting and sheet metal work in Bengaluru were finding other suppliers first, because the company did not rank for the terms its own customers type.
    What we did
    • The site redesigned for mobile
    • Search work on the buyer's terms
    • Content that shows the work
    • Social channels managed
    Result
    • Website traffic rose 60% within six months, against a target of 50%.
    • High-quality leads rose 45%, with a rise in conversion rates alongside them.
    • Fifteen target keywords moved up the rankings, five of them into the top three positions.
    Read the case study
  • HOPO Hardware

    Situation
    There was no website or online platform of any kind, so nothing showed the products, their features or their technical specifications. A dealer who wanted a specification had to ask for it every time.
    What we did
    • Website and product catalogue
    • Logo and colour palette
    • Printed stationery
    • Social accounts opened
    Result
    No numbers were recorded for this engagement. The work is described in full in the case study.
    Read the case study

Also worked with

Chord Road Hospital · Curtain Label · Difesa Security Services · Felicity Inn · Hands On CSR · Implevista · Kambar Group · Kalessi · Kerur Pain Clinic · LL Trust · Lucky Deals · Natural Gases · NavaShakthi Souhardha · NewCom Logistics · Proton Technical Services · Shakthi Foundation · Shakthi Group · Urbanest · Insyde Studio · Venkateshwara Laser Tech · Vivara Studios

Why us

Why owners pick GullySales over an agency.

  • Marketing and sales, as one job

    Most agencies stop at the enquiry. We also fix what happens after it: the reply, the follow-up, the quote and the CRM.

  • The person on the first call does the work

    No account managers in between. You are never handed to someone you have not met.

  • A baseline before anything starts

    Your numbers are written down on day one, so every later report compares against something honest.

  • The fee in writing, split three ways

    Our time, your media spend and production on separate lines. You always see what goes to us.

  • No guarantees we cannot keep

    The term is agreed in writing and never a default twelve months. We never promise a ranking or a lead count, because nobody controls those.

  • One office, and we say so

    Nagarbhavi, Bengaluru. We work across India by call and WhatsApp and travel when a session needs to be in person.

#257, 3rd floor, Sri Nanjundeshwara Complex, Nagarbhavi 8th Block, Outer Ring Road. How we work.

The offer

Start with a free audit of how you sell.

It is useful on its own, whether or not you hire us.

What you receive

  • A 90-minute call with the person who will do the work
  • A written, scored report on the six places orders leak
  • Every fix ranked by what it returns and what it costs
  • The one thing to do first, and why
  • An honest line on whether you need outside help at all
  • If you do, the scope and the fee in writing

No invoice. No obligation. No sales script.

We call and WhatsApp on this number.

We use your details only to reply to this enquiry. See the privacy policy.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How often should a machining shop post?
Once a week from the floor does more than five posts from a stock library. Parts finish in your shop every day, so the material is already there. The real limit is who remembers to take the photograph.
Nobody here wants to be on camera. Does that stop us?
No. The part is the subject and the caption does the explaining. Hands, a machine and good light are enough.
How soon would we see more RFQs?
Fixing quote turnaround and the capability page shows within weeks. Ranking for a search such as five-axis machining in your industrial area takes a few months.
Do we need to advertise?
Most shops benefit first from a faster quote response and a clearer website. Advertising helps when you want a specific capability, such as export orders, pushed this quarter.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped in the free audit and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after the audit, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
Who will actually do the work?
The person you meet on the audit call. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
For the audit, last month's enquiries in any format and 90 minutes with whoever handles them. After that, access to the accounts the work touches, such as the website, Google Business Profile or CRM, and time for the review meetings.

Your next practical step

Get a free audit of how you sell, and a scored report of where the work is.

90 minutes. A written, scored report. No invoice and no obligation.