Skip to content
GullySales

Handyman and home maintenance services · CRM

Keep every enquiry, quote and repeat visit where the whole team can open it.

A CRM for a handyman firm is the record of each person who has called, the fault they described, what was quoted and when the next contact is due. GullySales sets up a record the technicians and the person answering the phone will use, starting with a shared sheet before any software is bought.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A handyman explains a cabinet repair to a homeowner

Last updated 14 Nov 2026.

For handyman and home maintenance services

Where it usually goes wrong, and what we would do.

  • “The customer list lives in one phone”

    The owner's contacts hold the history of every flat the firm has served. If that phone is lost, or a coordinator leaves, the geyser model, the flat number and the date of the last visit leave with it.

  • “Technicians remember what the office never wrote down”

    The technician knows which tap needed a new cartridge and which building has no lift. None of it reaches the next person unless a note is made at job close, so a return visit starts from nothing.

  • “A CRM that the crew ignores loses to a plain sheet”

    Firms buy a CRM, enter a week of records and abandon it because the fields are too many. A short record that is filled in at the door beats a rich one that is filled in never.

  • “Repeat work follows dates”

    Tank cleaning, AC servicing and pre-monsoon checks come round on a schedule. A record without a next-due date cannot tell the firm who to message, so the repeat job goes to whoever remembers first.

What we do

What we deliver for handyman and home maintenance services.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A short enquiry record

    Name, locality, fault, source, quote, status and next step, kept to the fields the person on the phone can fill in while talking.

    Result: Every enquiry has the same few fields.

  2. A job history for each flat

    The work done, the parts fitted and the photographs, held against the address or the landlord.

    Result: A return visit begins with the last visit in front of the technician.

  3. A next-due list

    A view of customers whose service, cleaning or seasonal check is coming round, for the person who sends the reminder.

    Result: Repeat messages go to the right people.

  4. Landlord accounts

    One record for an owner with several flats, showing each flat, each job and one contact.

    Result: A landlord is one account, not five strangers.

  5. Past customers moved in

    Contacts and job notes brought from the owner's phone and WhatsApp into the record, with a mark for who agreed to hear from you.

    Result: The firm starts with its own history.

  6. A tool recommendation

    A shared sheet first, then a CRM in ordinary use in India, such as Zoho CRM, only when the sheet is being outgrown.

    Result: You spend on software when the habit is already there.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep the flat, the fault and the next visit due.

Address, floor and access notes
Filled by the person who books, such as the watchman, the lift or the key holder, so the technician is not turned away.
Job done and parts fitted
Entered by the technician at the visit, so a later call about the same geyser or tap starts with what was fitted.
Amount quoted and amount billed
Recorded by the office, which shows where a revised figure caused a dispute.
Next service due
Set by the office after a tank clean or a fitting, so the customer is reminded before the monsoon or the next season.
Owner, tenant or landlord contact
Recorded once, so the bill goes to the person who pays and the visit is arranged with the person who lives there.
Technician assigned
Entered at booking, which shows whose work draws repeat calls and whose draws complaints.

Who it is for

This is written for these handyman and home maintenance services.

  • Single-trade plumbers and electricians
  • Carpenters and furniture fixers
  • Painters and waterproofing teams
  • Multi-skill handyman firms
  • AC and appliance repair teams
  • Home AMC providers for flats and villas
  • Property maintenance for landlords and PGs
  • Pre-move-in and post-handover snagging teams

Before you decide

When this may not be the right fit.

  • The firm has few customers, and the owner knows each flat and fault by heart.
  • The technicians will not report what they fitted, and the record would be empty where it matters.
  • Customer details sit in a former partner's phone and nobody has agreed to move them.

Before you decide

Agree the work. Know how to judge it.

CRM for handyman services: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from handyman and home maintenance services. Anything missing is noted in the written scope, with who will supply it.

Every phone and notebook with customer names
Collect or photograph the places customer details live. The import depends on them. If some stay with technicians who will not share, the record starts incomplete.
A person who enters the records on the day
A named person must add each call to the sheet at the time. Pick who, and plan what happens when they are away. Without this, the sheet is stale within days.
A clear rule on who sees what
Customer details and addresses need care. Decide who may read, edit or download the sheet, and who must not. Missing this, the record may leave with a departing technician.
A decision on keys and gate arrangements
If you note where keys are left or how to enter a flat, decide how that is stored. It is sensitive. If you prefer not to record it, we leave it out and the technician asks at each visit.
Your past customers' consent status
Know which past customers agreed to be contacted again. Tell us what you have. Without it, the reminder list is limited to people who asked for it.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    See where customer details live today

    We ask you and the desk to show us everywhere customer details sit: the owner's phone contacts, a notebook, WhatsApp chats, the invoice book, technicians' own phones. We count the places and note which holds the largest share. This tells us how much must be gathered before a shared record can replace them.

  2. 2

    Decide what a record must hold

    We choose the few facts each enquiry needs: name, number, flat or address, fault, quote, owner and next date. You say which extra facts matter to your trade, such as the key arrangement or gate pass. We cut anything the desk would skip, because a long form is a form nobody fills in.

  3. 3

    Start with a shared sheet

    We build the record as a shared sheet before any software is bought. The desk and owner fill it from today's calls. You decide who may edit and who may only read, and we show the crew how to open it on a phone, so a technician at a site can look up the earlier visit before ringing the bell.

  4. 4

    Move in past customers and landlords

    We import the contacts you can trust from phones and the invoice book, tagged by flat and landlord, so a job history exists for each home. You mark people who asked not to be contacted. The import is done once, carefully, and duplicates are merged.

  5. 5

    Add the next-due list

    Jobs with a natural return, such as a geyser service or repainting, go on a list sorted by the date a call is due. The desk reads it at the start of the working day. You decide which jobs deserve a reminder and which would feel intrusive.

  6. 6

    Check whether a tool is needed yet

    After the sheet has been used with real enquiries, we look at what slows the desk and what the crew skips. Only then do we suggest software, if any. You compare calls recorded and visits booked with the earlier picture before spending on a tool.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is a spreadsheet really enough for a small firm?
For a small team, yes, if it has one row per enquiry and an owner for each row. Move to a CRM when two people edit at once, or when reminders need to go out without someone remembering.
Who should enter the records, the technician or the office?
The person who hears the detail. The office logs the enquiry and quote; the technician adds a line at job close. Keep the technician's part to one message on WhatsApp, which the office copies in.
Can we keep customer data safely?
Keep it where only the team can reach it, collect only what the job needs and message only customers who agreed to hear from you. Check your own adviser on data and consent obligations.
Is it safe to record the key arrangement for a flat?
Record who holds the key, not a code or a hiding place. A record may be seen by several staff, so keep only what a technician needs to arrange the visit. Ask the customer to share any sensitive detail directly with the person who attends.
If a technician quits, what becomes of the customer record?
Nothing is lost, because the record lives in the firm's shared sheet and not in the technician's phone. Remove the person's access on their last day, and ask them to hand over any notes or chats that held customer details. Job history, quotes and next dates stay with the flat. We write this as a short exit step, and you can add it to your own checklist for people leaving.
How do we keep customer data safe?
Limit who has access, use a login for each person, and keep the sheet in an account you control. Do not email copies around. Remove access when a technician leaves. Record only what you need, and avoid noting anything sensitive such as door codes. Check with your own adviser about the rules that apply to customer data in your area.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.