Skip to content
GullySales

Handyman and home maintenance services · Lead generation

Turn a leaking tap in one flat into a booked visit before the next number is dialled.

Lead generation for a handyman firm is the work of getting a person with a fault, or a landlord with a list of repairs, to call or message you instead of the next number on the screen. GullySales works on the Maps profile, the job pages and the WhatsApp route that bring those enquiries, and on how each enquiry is recorded.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A handyman explains a cabinet repair to a homeowner

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For handyman and home maintenance services

Where it usually goes wrong, and what we would do.

  • “The urgent lead lasts for one search”

    A tripped geyser or a dripping ceiling sends the flat owner to Maps once. They tap the first listings that show a rating and a call button, and the job goes to whoever picks up. Getting that lead is a matter of an accurate listing and a phone that is answered.

  • “Planned work arrives with questions attached”

    Someone who wants a wardrobe hinge fixed or a terrace sealed asks the society group, saves a few numbers and wants to know what a visit covers. The lead comes to the firm whose page or first message answers that before the buyer has to ask.

  • “One landlord is a string of leads”

    The owner of several flats or a PG sends one enquiry that turns into repair after repair. Treat that first call as the start of an account, with one contact and photographs after each visit, and the next flat comes without a new search.

  • “Every source looks identical until it is labelled”

    A call from Maps, a forward from a neighbour and a message from the sticker on the van all land on the same mobile. Without a note of where each came from, the owner cannot tell which route deserves more effort and which only feels busy.

What we do

What we deliver for handyman and home maintenance services.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A job-and-area enquiry path

    One route per fault and locality, from the Maps button or the page to a call or WhatsApp message, written for the job the buyer has in mind.

    Result: A leak enquiry and a wardrobe enquiry each land somewhere that fits.

  2. A missed-call rule

    A routine for noting each call that rings out while the team is on site, and for who calls back and in what order.

    Result: No missed call goes unrecorded.

  3. A landlord and PG enquiry route

    A short form and a WhatsApp reply for owners of more than one flat, asking for the list of repairs and the access arrangements.

    Result: A multi-flat owner is handled as an account.

  4. Source tags on every enquiry

    A one-word note on the enquiry sheet for Maps, page, referral, society group or van.

    Result: You see which route brings the work.

  5. A referral ask at job close

    A line the technician says and a message that follows, asking the customer to pass the number to a neighbour or a landlord friend.

    Result: Past customers have a clear way to send the next one.

  6. An enquiry sheet with an owner for each row

    One shared record with the fault, the locality, the person who replied and the next step.

    Result: Nothing sits without a name against it.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Capture the fault and the flat before the call ends.

The fault in the caller's words
A tap that drips or a switch that sparks, written as said, so the right technician and tools are sent.
Photograph of the problem
One picture of the leak, the socket or the wall, which turns a vague call into a job the team can price.
Flat or house, and the floor
Matters for access, parking and lifts, and tells the technician whether the visit may need a second person.
Urgent or planned
A burst pipe is booked now; a repaint can wait. The answer decides who is called back first.
Owner, tenant or landlord
Records who pays and who must approve, so a tenant's call does not end at a landlord who was never told.
How the caller found you
A listing, the map, a neighbour or a landlord, noted at the first call, so the owner sees which source sends paying work.

Who it is for

This is written for these handyman and home maintenance services.

  • Single-trade plumbers and electricians
  • Carpenters and furniture fixers
  • Painters and waterproofing teams
  • Multi-skill handyman firms
  • AC and appliance repair teams
  • Home AMC providers for flats and villas
  • Property maintenance for landlords and PGs
  • Pre-move-in and post-handover snagging teams

Before you decide

When this may not be the right fit.

  • The team is fully booked and cannot take any new visit, so more enquiries would only be refused.
  • Nobody calls back a missed call, and a new source would add calls that go unanswered.
  • The firm wants only landlord and annual contract work and will not take a single call-out.

Before you decide

Agree the work. Know how to judge it.

Lead generation for handyman services: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from handyman and home maintenance services. Anything missing is noted in the written scope, with who will supply it.

A rough record of last season's jobs
We need a list of jobs with the customer's source, even if incomplete. It sets the starting picture. If there is none, we begin tagging from today and the first comparison waits until enough rows exist.
Control of the Maps profile and number
The enquiry path depends on a profile and number you own. Bring the logins and say who answers. If these are in someone else's hands, the first task is to recover them.
A list of the landlords you serve
Repeat accounts are your best leads. Bring the names, the number of flats and the kind of work. Without this, the landlord route is built blind and may miss the people already trusting you.
A rule for calls outside your reach
Decide whether you will take or refuse jobs far from your areas. Write the rule for the desk. Without one, each call is judged on the spot and the crew spends time on trips that do not pay.
A person to ask the source question
Someone must ask every caller how they found you and write it down. Name that person. If nobody does, the source tags stay empty, and the report shows only totals.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Count where the last jobs came from

    We go through the last batch of jobs and ask where each customer found you: Maps, a neighbour, a landlord, an app, a society group, a sign on the van. The desk fills the gaps from memory. This gives a first, honest picture of your sources, with the unknown ones marked as unknown.

  2. 2

    Set up the job and area enquiry path

    Each job and area you serve gets a route from the search or listing to a phone that is answered. We check the Maps profile, the page for the job and the number. You tell us which jobs and places to push first, and we leave the rest quiet.

  3. 3

    Fix the missed-call rule

    An urgent lead lasts for one search, so a missed call must be returned at once by someone. We agree who calls back, what they say and how the sheet records it. You test the rule by calling your own number at a busy time and watching what happens.

  4. 4

    Build a route for landlords and PG owners

    A landlord with several flats is a string of leads, so that landlord needs a different door: a short page, a contact for repair lists, and a way to share photographs. We write it with you and decide who handles these accounts. You give us any landlords you already serve.

  5. 5

    Tag every enquiry with its source

    Each enquiry row on the sheet gets a source tag: Maps, site, WhatsApp, referral, app, landlord. The desk fills it by asking the caller. We test that the tags are used for a few days before relying on them. Without the tags, all leads look alike.

  6. 6

    Compare sources by visits booked

    We lay the count of enquiries and booked visits by source against the first picture. You see which source brings visits and which brings only calls. You then decide where the next push goes, and which source the van's route can actually support.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Where should a two-technician firm look for leads first?
Start with the Maps profile and the phone, because urgent faults come from there. Add a page for the two or three jobs you do best, then the referral ask. Advertising comes after the phone is answered reliably.
Do leads from the listing apps count?
They count as leads, tagged by source like the rest. Record who the customer is and whether they came back to you directly, so you can see whether the app is feeding your own list or only renting you the work.
How do we tell a good enquiry from a wasted call?
Compare enquiries with quotes sent and jobs done, by source. A route that brings calls for jobs outside your area or price is not generating leads for you, however busy the phone looks.
Should we take calls from outside the areas we cover?
Take them only if a technician can reach the door on time. A far call costs travel and leaves the nearer customers waiting. Name the areas you serve in the first reply, and offer a later visit if the job can wait.
Should we pay for leads from the listing apps?
Decide after you have counted. Note, for each lead from an app, whether it became a visit and a paid job, and what the app charged. Compare that with the cost of a lead from your own profile or referrals. We help you set the count up, and you judge whether the app earns its fee for your crew and areas.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.