Skip to content
GullySales

Industrial equipment manufacturers · Sales turnaround consulting

When orders fall, read the RFQ register before blaming the market or the price.

Sales turnaround consulting for an equipment manufacturer is a focused diagnosis of why orders have dropped. GullySales reads your RFQ register, offers, order book and lost-order notes, separates market, product, price, team and follow-up causes, and writes an ordered list of fixes with interim controls. It does not promise a recovery.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

An owner and adviser review monthly order records and lost-deal reasons

What sales turnaround consulting means

Sales turnaround consulting is a focused diagnosis for a business whose sales have dropped. GullySales reads the last twelve months of enquiries, quotations, orders and lost deals, separates market, product, price, team and follow-up causes, and writes an ordered list of fixes with interim controls. It does not promise a recovery.

Last updated 14 Nov 2026.

For industrial equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “Fewer RFQs and fewer wins are different problems”

    If fewer enquiries reach the plant, the fix lies in visibility and reach. If the same enquiries arrive and fewer become orders, the fix lies in the offer, the follow-up or the price. Without splitting the fall by stage, spend goes to the wrong place.

  • “Price is the easy reason in the lost-order note”

    The register says lost on price, but the offer may have gone out after the buyer had already shortlisted another maker, or without the certificate the buyer needed. Reading the file shows whether price or timing lost the order.

  • “The repeat buyers have gone quiet”

    Plants that ordered a machine and then spares or service rarely announce a change of supplier. A list of installed accounts with the last order and the last contact shows who stopped, and when a rival's service engineer may have taken the site.

  • “A key person left and the effect is unknown”

    When a senior sales engineer or a dealer leaves, accounts can go quiet with them. Nobody knows which buyers were theirs, which offers were pending and what had been promised, so the loss cannot be sized.

What we do

What we deliver for industrial equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Enquiry-to-order trace

    A view built from your RFQ register, offers and order book, showing at which stage the fall began and which machine ranges are affected.

    Result: The owner can name the stage where orders are lost.

  2. Lost and stalled order register

    Every lost or silent offer with the reason recorded, the competitor if known, and the last contact with the buyer's technical and purchase heads.

    Result: Reasons are read from the file, not recalled.

  3. Cause map

    A page separating market, product, price, team and follow-up causes, each marked as supported by your records, partly supported or a guess.

    Result: The owner knows which explanations the evidence backs.

  4. Installed-base and dealer review

    A list of past buyers and dealers with the last order and last contact, marking those who have stopped ordering.

    Result: Quiet accounts are named and a call is planned for each.

  5. Ordered fix list

    The fixes put in an order, each with an owner on your side and a note on what it costs the business in effort.

    Result: The first change is chosen on evidence.

  6. Interim controls sheet

    Simple controls to hold while the fixes begin, such as a second sign-off on offers above an agreed value and a rule on who answers RFQs.

    Result: Further leakage is slowed while the plan is built.

How the result is measured

  • Enquiries received by source, month by month
  • Enquiry-to-quotation and quotation-to-order conversion
  • Average order value and discount given

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these industrial equipment manufacturers.

  • CNC machine and precision equipment manufacturers
  • Industrial pump and compressor manufacturers
  • Packaging machinery manufacturers
  • Conveyor and material handling equipment makers
  • Motor and drive manufacturers
  • Custom fabrication and job-work manufacturers
  • Export-oriented industrial equipment makers
  • Spare parts and after-sales service providers

Before you decide

Agree the work. Know how to judge it.

Sales turnaround consulting for industrial equipment manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Review orders by buyer type, offer, and route to market. Include lost proposals and capacity limits so the plan reflects what the team can actually sell and deliver.

Make the scope clear

Choose the target buyer and offer before setting activity targets. Agree responsibilities for finding opportunities, qualification, proposals, and the final commercial decision.

Check the work in use

Check whether the plan explains where the next suitable opportunities will come from and why buyers would choose you. Each priority needs an owner and a way to review progress.

Know when to change course

If the target assumes more delivery capacity or selling time than exists, change the plan. Raising the target does not create either resource.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

The RFQ register and order book for the period
These are the base of the diagnosis. Bring both for the span we agree, plus the period before the fall, so that we have something to compare with. If the register is incomplete, we use emails and invoices and mark the gaps, which makes the trace slower and the findings less firm.
Lost-order notes, however brief
The reasons recorded at the time, even one-liners, are valuable. Bring them, and any email from a buyer who explained why they went elsewhere. Where none were written, the sales engineers give reasons from memory and the cause map notes that these are recollections and may flatter the team.
A list of repeat buyers and dealers
We need to know who bought before and who has stopped, with the date of the last order and of the last service call. The accounts and service records can supply this. Without it, the installed-base review cannot be done, and the repeat-buyer question stays unanswered.
An honest account of who has left
Tell us about key people who left in or before the period, and what they handled, including the accounts that were theirs alone. This is sensitive, and we treat it as private. We also ask whether those accounts were handed over in a meeting or just reassigned on paper. Without it, the effect of the departure remains unknown.
Willingness to hear a finding about yourself
The cause may sit in a decision the owner made, such as a price change or a dealer policy. The owner must be ready to read it. If not, we can still work but the cause map may omit the central issue.

How it works

How the sales turnaround consulting work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Agree the question and the period to study

    We begin with the owner and decide the exact question: fewer RFQs, fewer wins, smaller orders or lost repeat buyers. We choose the span of records to read, starting before the fall and ending now. The brief also states that the work will find causes and propose fixes, and does not promise a recovery. We note any change made in the span, such as a new dealer, a price revision or a change of sales head, so the findings can be set against what the business itself did.

  2. 2

    Trace each enquiry from RFQ to outcome

    We take the RFQ register, the quotations and the order book and trace every enquiry in the chosen span to its outcome: ordered, lost, stalled or never answered. We separate the count of enquiries received from the count converted. Falling enquiries and falling wins are different problems. If fewer enquiries arrive, the question is about visibility and market; if the same enquiries convert less, it is about the offer, the price or the follow-up. The split points the rest of the work in the right direction.

  3. 3

    Read the lost and stalled orders

    We list the lost and stalled orders and read the reason recorded for each. Where the note says price, we look at the quotation and ask whether price was the real reason. We also look for patterns by machine, sector, sales engineer and dealer. The list becomes the lost and stalled order register. Price is the easy reason to write in a lost-order note, so we check it against the quotation and against what a rival's offer is known to have said before accepting it. Notes that say nothing are counted separately.

  4. 4

    Review the installed base and the dealers

    We look at the repeat buyers and ask which have gone quiet, and at the dealers who have stopped ordering. We note whether a key person left and what relationships left with them. Service and spares records show whether the base is still being served. A buyer who has not ordered spares for a long stretch may be buying from someone else, and a dealer who has stopped calling is a warning that arrives long before the order drop.

  5. 5

    Check the causes with your own people

    We build a cause map that groups the findings under market, product, price, team and follow-up, and take it to the sales head, the works head and the owner. They tell us what we have misread. A cause that your people reject on evidence is changed. A cause they dislike but cannot refute stays on the map, with the evidence beside it. We also mark the causes that lie outside your control, such as a market slowdown, so that effort is not wasted trying to fix them.

  6. 6

    Write the ordered fix list and the interim controls

    We write the fixes in the order they should be tried, with an owner for each and the figure that will show whether it worked. For the period before the fixes take effect we write interim controls, such as a check of open quotations by the sales head, that stop further slippage. The owner chooses what to adopt, and the fix list says plainly which items are quick to try and which need a change in people or policy. Items that would need an investment are stated with what the owner would have to decide, not with a figure of ours.

Proof

Published examples of our work.

Real clients and the work recorded for each engagement. These examples may cover related services or industries. They show the method, not a guaranteed result.

All case studies
  • Burhani Hydroline

    Situation
    The website was dated. Menus were hard to follow, pages were slow, and it did not work properly on a phone, which is where a buyer looks first.
    What we did
    • Research before design
    • Wireframes and prototypes
    • The full product catalogue
    • An online checkout
    Result
    No numbers were recorded for this engagement. The work is described in full in the case study.
    Read the case study

Also worked with

Chord Road Hospital · Curtain Label · Difesa Security Services · Felicity Inn · Hands On CSR · Implevista · Kambar Group · Kalessi · Kerur Pain Clinic · LL Trust · Lucky Deals · Natural Gases · NavaShakthi Souhardha · NewCom Logistics · Proton Technical Services · SB Engineering · Shakthi Foundation · Shakthi Group · Urbanest · Insyde Studio · Venkateshwara Laser Tech · Vivara Studios

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Will GullySales guarantee that orders recover?
No. We find the causes your records support and write the plan. Whether orders recover depends on the market, on the changes you make and on how well your team carries them out.
What if the cause is the market or a rival?
We say so in the report. A fall across the whole sector, a new competitor or a buyer's own cash problem is recorded as such, together with what your team can still control inside it.
What do we need to have ready?
The RFQ register, offers sent, orders booked and any lost-order notes. If these are scattered across inboxes and notebooks, the first task is to gather them. If nothing is recorded, a register has to be started before a diagnosis is possible.
Will our sales engineers be told they are being investigated?
They are told that the business is reviewing why orders fell, and that the work reads records and does not rate individuals. We ask the owner to say this to the team before we begin. If a finding concerns a person's work, the owner receives it privately, and the report states the practice and not the individual.
Does the diagnosis include how our dealers have performed?
Yes, where dealers sell your machines. We read the orders by dealer and territory and note which dealers have slowed. We do not contact dealers unless you ask. The finding may be about a dealer's capacity, a rival's terms or your own support, and the cause map keeps those three apart.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.