Skip to content
GullySales

Industrial equipment manufacturers · Territory planning

Give each sales engineer the plants they can actually cover.

Territory planning for an equipment maker divides plants, industrial estates and installed machines among your own sales engineers by what each account could buy and the visits it needs. GullySales reads your RFQ register and installed-base list, proposes the new assignments, and prepares the handovers for your sales head to approve.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of industrial equipment manufacturers at work in India

What territory planning means

Territory planning is dividing customers and prospects across a sales team by location or account type. This way, two salespeople are not chasing the same customer and some areas are not ignored. GullySales draws these boundaries from your actual customer map, not an assumed even split.

Last updated 14 Nov 2026.

For industrial equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “Plant visits eat the working day”

    A sales engineer who drives between industrial estates loses a large part of a day to a single technical discussion. A map drawn by district ignores that. Two patches of equal size can hold one cluster of foundries a short drive apart and another cluster of workshops spread across a highway belt. The first engineer meets four buyers before lunch; the second meets one. Planning has to count travel and the length of a technical visit, or the quota is set against hours that do not exist.

  • “New machines and spares sit in different heads”

    A plant that bought your press last season is a spares and service account, a retrofit account and a possible repeat order, all at once. A plant that has never bought is a long first sale. Giving both kinds to one engineer on one target hides which work is being neglected. Territory planning for an equipment maker decides who holds the installed base and who chases the new plant, and writes down how a lead moves between them.

  • “A few large plants distort the patch”

    One automotive supplier or one process plant can hold more buying potential than twenty small workshops combined, and its purchase needs a plant engineer, a purchase head and a finance sign-off. If such a plant sits inside an ordinary patch, the engineer either lives there and starves the rest or ignores it. The plan names these accounts separately, assigns a lead and a support, and keeps the surrounding patch workable.

  • “A leaver takes the plant relationships along”

    When a sales engineer resigns, the buyer's trust in a particular person leaves with them, and the open quotations go quiet. Territories drawn without an account register and a note on each live RFQ leave the next engineer starting from a business card. The plan treats the handover of a live quotation, an AMC due date and a pending drawing approval as part of the territory, not as an afterthought.

What we do

What we deliver for industrial equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Account and installed-base register

    One list of every plant you sell to or have sold to, with its estate, the machines you supplied, the contact on the technical side and on the purchase side, and the engineer who now holds it. Accounts found only in a salesperson's phone or notebook are added, so that ownership is no longer a matter of memory or argument between colleagues.

    Result: Every live RFQ and every machine supplied has one named owner on the register.

  2. Plant potential map

    A map of industrial estates and clusters in your selling area, marked by the number of plants of the kind that buy your equipment sit there and what each could plausibly need, using your own records and public listings. It separates the estates worth a standing visit rhythm from those better served by phone and quotation.

    Result: Each estate is marked with the reason it ranks where it does, which your sales head can challenge.

  3. Visit and travel workload comparison

    A table comparing each engineer's current patch on accounts, open RFQs, installed machines due for service and the travel between them. It shows which engineer is overloaded and which has room, using your own call and visit notes rather than assumed averages.

    Result: The sales head can see the gap between the busiest and the lightest patch before anything moves.

  4. Proposed territory assignments

    Two or three workable ways to split the plants, with the cost of each stated plainly: which estate changes hands, which engineer gains travel, which large plant becomes a named account. Your sales head chooses, and the chosen version is written as a single assignment sheet.

    Result: One approved assignment sheet lists every estate and named plant against an engineer.

  5. New-sale and installed-base rules

    A short written rule on who owns a plant that has already bought a machine, who follows up spares and AMC renewals, and how a service enquiry that turns into a replacement machine passes to the right person. It stops two engineers quoting the same plant.

    Result: A service call that becomes a new-machine lead has a written route and a named receiver.

  6. Handover pack and review plan

    For each account that moves, a one-page note covering open quotations, promised drawings, the buyer's preferences and the date of the last visit, plus a plan for reading the new split against the figures recorded at the start. The outgoing and incoming engineers go through it together.

    Result: Every moved account has a handover note signed off by both engineers.

How the result is measured

  • Coverage per territory
  • Accounts per salesperson
  • Enquiries by territory

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these industrial equipment manufacturers.

  • CNC machine and precision equipment manufacturers
  • Industrial pump and compressor manufacturers
  • Packaging machinery manufacturers
  • Conveyor and material handling equipment makers
  • Motor and drive manufacturers
  • Custom fabrication and job-work manufacturers
  • Export-oriented industrial equipment makers
  • Spare parts and after-sales service providers

Before you decide

Agree the work. Know how to judge it.

Territory planning for industrial equipment manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Map the accounts, travel pattern, and purpose of each visit. Distinguish a useful buyer meeting from a visit recorded only to meet an activity target.

Make the scope clear

Agree territory coverage, visit priorities, and how notes reach the rest of the team. Include the handover for quotations or technical questions that cannot be resolved on site.

Check the work in use

Review what changed after the visit: a requirement clarified, an agreed trial, or a next decision. Compare time spent with account potential and the quality of follow-up.

Know when to change course

If a routine update can be handled remotely, reserve travel for work that needs a visit. Do not expand coverage beyond the team's ability to follow through.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

Customer and RFQ register
We need every plant you have quoted or supplied, with the owner of each as things stand. Without it, the plan is drawn on guesses and the loudest engineer's account of who holds what. A partial list is acceptable if you tell us what is missing, so that gaps are filled by the engineers rather than assumed.
Installed machine list
A list of machines you have supplied, with plant, model and date, is what makes spares and AMC accounts visible. If it lives only in service records or invoices, we can extract it from those, but it takes longer to confirm. When it is missing entirely, installed-base accounts cannot be planned and are left out of the scope.
Engineer visit and call notes
The notes engineers keep on plant visits, calls and quotations show where time goes. A diary, a spreadsheet or CRM entries all work. Without any record, workload is judged from the engineers' own description, which is useful but unchecked, and we say so in the comparison.
Named accounts decision
Your sales head and owner should decide which large plants are handled as named accounts, and who may talk to them. If this is left open, the territory is drawn around plants that are later pulled out, and engineers lose targets they planned for.
A person to tell the team
Moving a plant from one engineer to another is a personal matter. Someone in your company, the sales head in practice, must tell each affected engineer before the sheet circulates. If we are left to announce it, the change reads as an outside order and the handover suffers.

How it works

How the territory planning work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Agree the selling area and rules

    We start with your sales head and write down the area covered, the engineers involved and anything that cannot change, such as an export desk or a key account held by the owner. We also record the figures to compare against later: open RFQs, orders won, spares sales and visit counts per engineer. Without this baseline, the review cannot say whether the new split helped.

  2. 2

    Build the account register

    We collect the customer list, the RFQ register, the installed-base records and the service history, and merge them into one register. Plants that appear under two spellings are joined; plants held only in a person's phone are added after that person confirms them. The register goes to your sales head to correct before anything is drawn on a map.

  3. 3

    Score potential by estate and plant

    Using your own order history and public information on each industrial cluster, we mark which plants could buy and what they might need, from a replacement machine to spares. Your sales head reads the scores against what the team knows on the ground. Where the engineers disagree with the score, we note the reason and adjust, because the people who visit know things a list cannot.

  4. 4

    Compare workload across engineers

    We lay each engineer's patch against the visits, travel, open quotations and service dates it needs. This shows the overloaded patch and the one with spare time without blaming anyone. The comparison also shows which accounts get no visit at all today, which is where equipment makers find lost repeat orders and unclaimed spares business.

  5. 5

    Propose splits and choose one

    We draw the options for your sales head, each with its trade-offs written out in plain words. The meeting ends with one choice, and the engineers affected are told by their own manager, not by us. Then we write the final assignment sheet, set targets that match the potential of each patch, and settle which plants are named accounts.

  6. 6

    Hand over and read the result

    Outgoing and incoming engineers go through each moved account with the handover note, and open quotations are re-introduced to the buyer by the person who knew them. When enough time has passed for the new patches to show results, we read the same figures recorded at the start and tell your sales head what changed and what did not.

Proof

Published examples of our work.

Real clients and the work recorded for each engagement. These examples may cover related services or industries. They show the method, not a guaranteed result.

All case studies
  • Burhani Hydroline

    Situation
    The website was dated. Menus were hard to follow, pages were slow, and it did not work properly on a phone, which is where a buyer looks first.
    What we did
    • Research before design
    • Wireframes and prototypes
    • The full product catalogue
    • An online checkout
    Result
    No numbers were recorded for this engagement. The work is described in full in the case study.
    Read the case study

Also worked with

Chord Road Hospital · Curtain Label · Difesa Security Services · Felicity Inn · Hands On CSR · Implevista · Kambar Group · Kalessi · Kerur Pain Clinic · LL Trust · Lucky Deals · Natural Gases · NavaShakthi Souhardha · NewCom Logistics · Proton Technical Services · SB Engineering · Shakthi Foundation · Shakthi Group · Urbanest · Insyde Studio · Venkateshwara Laser Tech · Vivara Studios

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need territory planning if our sales team is only a few engineers?
Yes, if the engineers overlap on plants or if one of them carries the larger accounts. A small team feels the effect of an unfair split more sharply, because one overloaded engineer is a third of your coverage. If each engineer already has a clear patch and the work is balanced, a short review is enough and we will say so.
Will you decide which engineer loses a plant?
No. We prepare the options and show what each costs in travel, workload and potential. Your sales head and owner decide, and tell the engineers. We write the assignment sheet and the handover notes afterwards, but the choice and the conversation with the people affected stay with your company.
What about plants we sell to through dealers?
Dealer areas belong to a different service, channel territory planning. This work covers only the accounts your own engineers sell to. Where a plant buys from both you and a dealer, we mark it in the register so that the overlap is visible and your sales head can settle who handles it.
How do you treat spares and AMC accounts against new-machine sales?
We separate them in the register and set a written rule for who owns each. A plant that bought a machine is both a service account and a possible repeat buyer, so the rule says who follows up spares, who raises an AMC renewal, and who picks up a replacement lead. Your sales head signs the rule.
Can the plan include export accounts?
If your export buyers are handled by your own engineers, yes, and they are marked as a separate group because their visits and time zones differ from local plants. If export goes through agents or a separate desk, we leave them out and note that. The rule is the same: your own sales force only.
How will we know the new territories worked?
We record open RFQs, orders won, spares sales and visit counts per engineer before any account moves, then read the same figures afterwards. If results are mixed, we show which patch improved and which did not, and the likely reason. We do not promise higher orders, because order volume depends on the market and on your quotations.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.