Skip to content
GullySales

Window manufacturers · Website

Build the website so a buyer can compare windows and book a measurement.

A website for a window manufacturer is the place where a buyer checks your systems, sees fitted work and decides to ask for a measurement. GullySales works on page structure, comparison content, enquiry forms and the sections for builders, architects and fabricators.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Windows and doors companies: show a real physical business scene illustrating Opening-wise measurement sheet. Record each opening with width, height, opening type, floor, location and a photo, taken on the surveyor’s phone at site.

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For window manufacturers

Where it usually goes wrong, and what we would do.

  • “The homepage has to sort the visitors”

    A homeowner, a developer, an architect and a fabricator all arrive at the same address. A homepage that sends each to the right section in one click serves them, and one that talks to everyone at once serves nobody.

  • “Photographs do the persuading”

    A buyer cannot test a window on a screen, so installed photographs with the room, type and glass named carry the proof. Stock images of a generic house give the buyer nothing to check.

  • “The quote sheet belongs on the site”

    A sample quote showing profile, glass, hardware and mesh line by line teaches a visitor how to compare. It also shows that you are open about what you supply, which the buyer notices.

  • “A phone visitor needs a short route”

    Visitors arrive on a mobile and want to call, message or request a measurement. A heavy page with a long form loses them, so the contact route has to sit near the top and stay light.

What we do

What we deliver for window manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Page map

    A structure with sections for homeowners, builders, architects and fabricators, with window type and material pages beneath.

    Result: Each buyer type has a clear section to enter.

  2. Comparison and window type pages

    Pages explaining materials and window types in plain language, each with an enquiry route.

    Result: A buyer can read the difference and ask on the same page.

  3. Installed work gallery

    A gallery filtered by window type, room and locality, using photographs the owner agreed to share.

    Result: A visitor can find a fitted example similar to their own need.

  4. Enquiry forms and click-to-call

    Short forms by buyer type, with call and WhatsApp buttons visible on a phone.

    Result: A visitor reaches you with a single tap.

  5. Downloads for professionals

    Section drawings, specification sheets and fabricator technical packs, each behind a short contact step.

    Result: Architects and fabricators can take what they need and be listed.

  6. Mobile and loading check

    Pages tested on common phones, with images sized so they open without delay.

    Result: Pages open and read well on a handset.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

What a buyer looks for on a window maker's site, and the page that answers it.

uPVC and aluminium window designs
A gallery of fitted windows by type and room, each with the material and glass named, and a button to request a measurement.
how to get a window quote
A process page showing the steps from measurement to fitting, with what the buyer should prepare and what the quote contains.
window comparison
A comparison page on materials, glass and hardware, which admits trade-offs, so a buyer can decide on facts.
windows for builders and projects
A page for developers with sample approval, repeat sizes and a form for the number of units and delivery schedule.
showroom location and visit
A page with the address, the samples on show and the hours the showroom takes visitors, with a map and a phone number.

Who it is for

This is written for these window manufacturers.

  • uPVC window manufacturers
  • Aluminium window and sliding door makers
  • Aluminium extrusion system suppliers to fabricators
  • Wooden window and teak frame makers
  • Fixed glass, curtain wall and structural glazing fabricators
  • Fire and acoustic window specialists
  • Mosquito mesh and safety grille window makers
  • Manufacturers with their own dealer and installer network

Before you decide

When this may not be the right fit.

  • Your photographs are catalogue images, and a new site would look like every maker using the same profile brand
  • The measurement request would land in an inbox no one watches, so a better site would collect enquiries that are not answered

Before you decide

Agree the work. Know how to judge it.

Website for window manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from window manufacturers. Anything missing is noted in the written scope, with who will supply it.

Domain and hosting access
Provide who registered the domain and hosts the site. We cannot launch without it. If an old agency holds it, ask them for release first.
Datasheets for each window system
Bring the technical sheets for each system you make. The comparison pages use them. Without them, pages describe window types only in general terms.
A set of fitted-work photographs
Collect pictures of finished windows with notes on the building and the system. Where there are few, the gallery starts small and your fitters add to it. Pictures taken on a phone are acceptable if they are sharp, show the whole opening and are not blocked by furniture or a worker.
A list of areas you serve
Write the towns and districts you serve and those you do not. The site states them honestly. If undecided, the form asks for the town and replies politely to places you cannot reach.
A person to answer forms and calls
Name who receives the measurement requests and calls from the site. Tests need a recipient. With none, enquiries pile up in a mailbox no one reads.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List what a visitor must find to book

    We start by asking the sales desk what a buyer needs before booking a measurement: systems offered, fitted examples, the area served, how to reach you. You add the doubts you hear. What exists afterwards is a list of must-have content, set before design, so the page map serves the booking. We also note the questions that a visitor on a phone in a showroom or on a site will ask, such as the nearest showroom or how to send a photograph, because those readers have no time to explore.

  2. 2

    Draw the page map for each visitor

    We sketch a homepage that sorts homeowners, builders, architects and fabricators into their own routes, with comparison and window type pages beneath. You review it and cross out pages you cannot keep current. The result is a structure your team can maintain.

  3. 3

    Gather fitted-work photographs and systems

    We collect pictures of finished installations, each with the window type and building noted, and the datasheets of your systems. You approve which may be shown and which owners agreed. The gallery draws only from these. Pictures of dust sheets, scaffolding or an unfinished sill are set aside, and where a good photograph does not exist we add a visit to the list, not a stock image of a window that you did not fit.

  4. 4

    Write the measurement request form with the desk

    With the person who takes calls, we write the form: number of openings, floor, wall, material wanted, a photograph, a phone number. You decide which fields are compulsory. The form is short enough to fill on a phone while standing in a room.

  5. 5

    Build a test copy and click through it

    We build the pages in a hidden copy. Your sales desk and a fitter go through it as a homeowner and as a builder, and note anything confusing. Changes are made on the copy. Nothing is public until the form reaches the right inbox. The copy is also opened on a weak mobile connection, since buyers will first see it that way, and any image that loads slowly is made smaller.

  6. 6

    Check the live site and the enquiries it brings

    After release we test forms, click-to-call and downloads on phones with a weak signal, and compare the site with the first list. We hand over logins and a note on editing. You decide who may change content. The enquiries recorded afterwards show whether visitors now ask for a measurement.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need an online price list?
Not necessarily. Window prices depend on size, glass and hardware, so a fixed list misleads. A sample quote and a guide to what changes the price serves a buyer better, and an enquiry form gets the real quote.
Can the site take orders online?
For a made-to-measure product, the better step is booking a measurement, because the order depends on openings that must be checked on site. We design the site to book the visit, and the order follows from it.
What should the measurement request ask?
Ask the locality, the building stage, the number of openings, the material preference and a phone number. Keep it short enough to complete on a phone. Each field should change what the measurer prepares, and anything that does not should be removed.
How do we show we serve only some areas?
State the cities or localities on the form page and check the pin code when the buyer enters it. A buyer outside the area then hears so at once, which is kinder than a dropped call later. Add an area once you have fitted there.
Should the site have a login for dealers?
Only if you will keep it useful. A login gives dealers access to the price list, datasheets and drawings, and keeps them from public view. It needs an owner who approves each dealer, removes those who leave and updates files. If you cannot do that, send a trade pack by request instead, after your sales head has checked the firm. We plan the trade section so that a login can be added later without rebuilding the pages.
Do we need a version in the local language?
If your homeowner buyers search and speak in it, yes, at least for the pages that sort visitors, explain the window types and carry the measurement form. A full copy of every page is not needed at the start. Choose the pages that bring the enquiries and translate those with a reviewer who knows window terms. Builder and architect sections can stay in English. We also check that the form accepts a name and a message in the local script.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.