Skip to content
GullySales

Solar installation companies · Sales discovery process design

Leave every first survey knowing whether the roof, the budget and the buyer are real.

Sales discovery process design for a solar installer is the written method for the first real conversation with a household, society or factory: what to learn, in what order, and when to stop. GullySales writes the question sets, the discovery note kept with the enquiry, and the rules for moving a buyer to a quote or letting the enquiry rest.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A trainer develops discovery questions while a colleague practises buyer notes

What sales discovery process design means

Sales discovery process design is the written method for a salesperson's first real conversation with a buyer: what to learn, in what order, and when to stop. GullySales writes the question sets, the discovery note your CRM holds, and the rules for moving a buyer on or letting the enquiry go.

Last updated 14 Nov 2026.

For solar installation companies

Where it usually goes wrong, and what we would do.

  • “A survey is booked for anyone who asks”

    A person curious about a neighbour's panels gets the same visit as a householder ready to apply. Without a few questions first, the survey engineer spends the day on roofs where the owner is a tenant, the terrace is shared or nobody has looked at the bill.

  • “The unknown approver appears after the quote”

    The caller asking for rates is a tenant, a junior in the office or a committee member gathering numbers. The owner, the treasurer or the director who signs is met only after the quotation, with fresh questions and a different budget in mind.

  • “Facts that change the system are asked too late”

    Roof ownership, shading from a neighbouring building, the sanctioned load, a previous rejected application or an existing inverter all alter the design. Learnt after the proposal, each one means a revised quote and a loss of trust.

  • “Nobody decides when an enquiry should stop”

    Society and factory enquiries linger on the list long after the buyer has gone quiet. With no rule saying what a real buyer has to confirm, the team keeps calling those who never intended to proceed and neglects the new ones.

What we do

What we deliver for solar installation companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Discovery topic list

    The facts to learn before any proposal: roof ownership and access, last bill, sanctioned load, decision makers, funding route, timing and other installers being considered.

    Result: Every discovery note covers the same ground.

  2. Question sets for each buyer

    Separate sets for homes, societies and commercial roofs, worded the way each buyer speaks, with the order in which to ask.

    Result: A rep does not ask a society committee the questions meant for a home.

  3. Pre-survey screening call

    A short script for the call that books the survey, covering the questions that decide whether a visit is worth making and who should attend.

    Result: Survey slots go to buyers who can decide.

  4. Discovery note in your CRM

    A fixed set of fields for what was learnt, who decides and what remains unknown, placed where the sales head can read it.

    Result: A manager reads the facts without asking the rep.

  5. Move-on and let-go rules

    Written conditions for when an enquiry goes to quotation, to a later follow-up or off the active list, with the reason recorded.

    Result: The team knows when to stop chasing.

  6. Practice with real enquiries

    Mock first conversations built from past enquiries your team handled, including those that went nowhere.

    Result: Reps try the new order of questions before using it on a live buyer.

How the result is measured

  • Discovery notes completed after first meetings
  • Unknown answers by topic, such as budget owner or timeline
  • First meetings that led to a proposal or a second meeting

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these solar installation companies.

  • Residential rooftop installers working with the PM Surya Ghar scheme
  • Housing society and apartment rooftop specialists
  • Commercial and industrial (C&I) rooftop EPC companies
  • Ground-mounted and open access solar developers
  • Solar water heater and solar pump dealers
  • Off-grid and hybrid systems with battery storage
  • Brand-authorised solar dealers and franchisees
  • Operations and maintenance and panel cleaning services

Before you decide

Agree the work. Know how to judge it.

Sales discovery process design for solar installers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring real questions, objections, and call examples that the team finds difficult. Agree which selling behaviour needs to change and how it will be observed at work.

Make the scope clear

Choose the roles and situations to practise. Separate a training session from coaching, manager follow-up, and any scripts or reference material to be produced.

Check the work in use

Use a realistic practice conversation, then review the same skill in live work with appropriate permission. Look for a change in behaviour before attributing a sales result to training.

Know when to change course

If the problem is an unclear offer, missing product knowledge, or no permission to make a decision, fix that first. A communication workshop cannot remove those barriers.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from solar installation companies. Anything missing is noted in the written scope, with who will supply it.

Recordings or notes of first meetings
Share a sample with the buyer's consent. They are the starting evidence for what the team asks today. Without them we rely on your sales lead's description, which is kinder than the calls themselves.
Your sales lead's time for the topic list
The sales lead must agree the topics and sit with us for the question trials. Block that time at the start. If it is not available, the question sets reflect our view of the trade and not yours. Please also bring any older topic list or checklist, because we would rather correct what your team already uses than replace it.
A place for the discovery note
Decide where notes live, in the CRM, a sheet or the enquiry file. Without a place, notes stay in notebooks and cannot be read by a manager or the next surveyor. Sheets are acceptable, but they should sit on a company account and not on one person's phone.
Examples of enquiries that wasted a survey
List enquiries that ended at the roof: a shaded terrace, a tenant, a society that had not agreed. They show what the screening call must catch before a van is sent. Add the reason each was a waste, written by the surveyor who went, as their phrasing guides the questions.
Authority to rest an enquiry
Decide who may let an enquiry rest and on what evidence. If nobody holds that authority, every enquiry gets a survey and the diary fills with visits that were never going to become orders. Rested enquiries are kept in the register with the reason, so the owner can see what was declined.

How it works

How the sales discovery process design work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Listen to recent first meetings

    We start with recorded calls or survey notes of recent first meetings, chosen with your sales lead. We mark what was learned and what was missed on each. You choose the sample, so it is not flattering, and the marks tell us which facts arrive too late to change a quote. We note which facts arrived only at the quote stage and which arrived at the first call, so the new topic order can bring the late facts forward.

  2. 2

    Agree the topics with the sales lead

    We draw a list of topics a first conversation must cover: bill, roof, ownership, decision-makers, funds and connection. You cut and reorder them until the list matches how your best surveyor works. The agreed list is the frame for every question set that follows. Topics that every buyer type shares, such as roof access, are listed once; topics for societies and factories sit in their own columns.

  3. 3

    Write and try the question sets

    We write questions for homes, societies and factories and try them on three live calls. Your team tells us where a question felt awkward or made a buyer defensive, and we rewrite it. A question that no buyer can answer on a first call is moved to the survey. A trial call is followed by a five-minute talk with the seller on how the buyer reacted, and the wording is changed the same day.

  4. 4

    Design the pre-survey screening call

    A short call before any survey checks the facts that change the system: roof access, shade, ownership and who signs. We script it and test it with your coordinator. You decide who makes the call and what they may promise, which should be nothing beyond a survey. The script also lists three answers that end the conversation politely, so a seller is never left defending a survey that should not be booked.

  5. 5

    Build the note and CRM fields

    The discovery note sits in your CRM or a sheet, with fields for each answer and a line for what is still unknown. We build it and test it with five real enquiries. You approve the layout, and fields that stay empty are removed. Fields use plain choices where possible, such as owner, tenant or society, so the note can be counted later.

  6. 6

    Set the rules, then read first notes

    We write the criteria for sending a buyer to a quote or resting an enquiry, and you sign them. After the first live notes are in, we read them against the starting sample and adjust the rules where they stopped a good buyer or passed a poor one. The criteria are printed on a single sheet, so a seller facing a hard enquiry knows what the owner has already decided.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Will screening questions put off a homeowner who just wants a quote?
The questions are framed as the information the engineer needs to quote properly. Buyers who want a number only are told what the number depends on, which a careful buyer values. We do not promise a particular response rate.
How is this different from lead qualification?
Lead qualification sorts incoming enquiries before anyone meets the buyer. Discovery design covers the conversation itself, at the call, the survey or the committee meeting, and what is written down afterwards.
Do we need a CRM for this?
A shared sheet works if everyone fills it in. If you already use a CRM, we place the discovery fields there. The note matters more than the software, and it must be written by the rep who met the buyer.
Who should hold the first discovery conversation?
The person who will meet the buyer on site, whether a surveyor or a sales engineer, should hold at least part of it, because the facts need to reach the person who writes the quote. A coordinator can run the screening call, and the surveyor completes the note after the visit. If the quote is written by a third person, the note carries what they need. You decide who owns each stage, and we write it into the note so no fact is lost in a handover. Your sales lead also decides whether the surveyor should call the buyer before the visit, since a short call shortens the visit itself.
What if a buyer will not answer the discovery questions?
Record which questions went unanswered and why, then decide with the sales head whether the quote can still be written. A buyer who will not say who decides or how they will pay is a risk to flag, not a reason to be rude. The rules for resting an enquiry say how many unanswered facts stop the quote. The buyer may return later, and the note shows where the conversation stopped. Review the unanswered list with the sales head from time to time to see whether the same question stalls buyers.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.