Auto parts manufacturers · Retail execution and merchandising
Make your part the one a mechanic finds first on the spares counter.
Retail execution and merchandising, for an auto parts maker, is the checking of how its parts are stacked, labelled, displayed and priced on the spares counters and in the workshops where a mechanic or vehicle owner makes the choice. GullySales audits those outlets, writes a display standard for each outlet type, and gives your field team a dated record to take back to the distributor.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What retail execution and merchandising means
Retail execution and merchandising checks how your products are stocked, displayed, and priced at the point of sale, then sets practical standards for each outlet type. GullySales reviews shelf presence, prepares display guidance and point of sale material, and gives your field team outlet-level findings to take back to dealers and your order desk.
Also for auto parts manufacturers
- Dealer network brand visibility for auto parts manufacturers
- Channel partner engagement campaigns for auto parts manufacturers
- Channel governance and conflict management for auto parts manufacturers
- Channel opportunity generation and follow-up for auto parts manufacturers
- Channel partner recruitment for auto parts manufacturers
- Channel sales strategy and route to market execution for auto parts manufacturers
- Channel territory planning for auto parts manufacturers
- Co-operative partner marketing for auto parts manufacturers
Sales and marketing for auto parts manufacturers, the overview.
Last updated 14 Nov 2026.
For auto parts manufacturers
Where it usually goes wrong, and what we would do.
“The part is in the shop but not within reach”
A mechanic walks in, names the vehicle model and asks for a part. The counter hand reaches for whatever sits at arm's length, and your box is on a high rack behind the till. Your invoice to the distributor shows the stock as sold, so the problem stays invisible. Placement near the counter, with the part number readable on the box end, decides whether the first brand handed over is yours or a rival's.
“Look-alike packs sit beside the genuine one”
Spares counters stock genuine, aftermarket and copied parts side by side, in similar boxes. A buyer who cannot tell your pack from a copy will either pay less for the copy or doubt both. Clear labels, a consistent box design and a place for your batch marking on the carton matter more here than any poster. The audit records what the buyer actually sees on the shelf, not what left the factory.
“Fitment knowledge lives in one person's head”
Some counters depend on a single experienced hand who remembers which part fits which model and variant. When that person is away, a junior picks a near match and the part comes back as a return. A printed fitment chart or counter catalogue at the point of sale carries that knowledge for the outlet. Without one, your warranty desk absorbs the cost of a wrong fit that started as a shelf problem.
“One display standard is sent to every outlet type”
A glass-front showroom counter, a lane-side spares shop, a garage that sells parts alongside repairs and a multi-brand parts chain each give you different wall space and different rules. A banner sized for one will not hang in another, so it ends up folded under the counter. A standard written for each outlet type, tested against real counters, is the only kind a shop owner will actually put up.
What we do
What we deliver for auto parts manufacturers.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Counter and rack audit record
A structured record for the agreed sample of outlets, covering where each priority part sits, how many boxes face the buyer and whether competitors occupy the eye-level positions. Dated photographs sit beside every finding, so your sales head can compare what the distributor reports with what the counter shows.
Result: You can open any outlet entry and see the dated photograph behind each finding.
Display standard by outlet type
A short standard for each kind of outlet you sell through, written around the wall space, rack height and counter width that outlet really has. It names which parts go forward, how boxes face the buyer and where a mechanic's reference material sits. Your field team tests it on a few real counters before it is approved.
Result: Each outlet type has a one-page standard your field team can check on site.
Part-number labelling and box-end guide
Guidance on how the part number, vehicle fit and batch marking should appear on the box end and the shelf edge, so a counter hand can read them without lifting the box. You check the guide against your packing line and printer before anything is changed on cartons.
Result: A counter hand can read the part number from the shelf edge without lifting the box.
Fitment chart and counter catalogue layout
A layout for a fitment chart or counter catalogue arranged by vehicle model, then variant, then part number. It is built from the fitment data you supply. Your technical team approves every line before it is printed, because a wrong fit printed on a chart does more harm than a missing one.
Result: Your technical team has signed off every fitment line before it reaches a counter.
Shelf-price and printed-price comparison
A comparison of the prices observed on shelves and labels against your supplied price list and against nearby outlets. Differences are flagged for your sales team to discuss with the distributor. The record reports what was seen; it does not instruct a dealer on what to charge.
Result: Every price difference is listed with the outlet, the part and the photograph that shows it.
Outlet correction list
A list of findings naming what needs attention and who acts: the distributor for stock, your field team for display, your design contact for material. Follow-up photographs record whether each item was corrected or is still waiting for stock or approval from you.
Result: Each open item names one responsible person and shows its follow-up evidence.
How the result is measured
- Outlets meeting the approved display standard
- Point of sale material correctly placed, separate from material dispatched
- Missing priority products or variants at the shelf
Recorded as a baseline before work starts, so every later report has an honest comparison.
Who it is for
This is written for these auto parts manufacturers.
- Component manufacturers supplying OEMs
- Aftermarket spare parts manufacturers
- Export-focused parts manufacturers
- Tier 2 and Tier 3 component suppliers
- Two-wheeler parts manufacturers
- Commercial vehicle parts manufacturers
- Casting and forging units supplying parts
- Manufacturers with an in-house aftermarket brand
Before you decide
Agree the work. Know how to judge it.
Retail execution and merchandising for auto parts manufacturers: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Map the accounts, travel pattern, and purpose of each visit. Distinguish a useful buyer meeting from a visit recorded only to meet an activity target.
Make the scope clear
Agree territory coverage, visit priorities, and how notes reach the rest of the team. Include the handover for quotations or technical questions that cannot be resolved on site.
Check the work in use
Review what changed after the visit: a requirement clarified, an agreed trial, or a next decision. Compare time spent with account potential and the quality of follow-up.
Know when to change course
If a routine update can be handled remotely, reserve travel for work that needs a visit. Do not expand coverage beyond the team's ability to follow through.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from auto parts manufacturers. Anything missing is noted in the written scope, with who will supply it.
- Priority part-number list
- The parts you want found first, with their numbers, vehicle fits and packaging. The audit needs a short list to look for. Without it, the field team records everything on the shelf and the findings that matter are buried among those that do not.
- Distributor and outlet list
- Which distributors serve which outlets, and what type each outlet is. The display standard is written by outlet type, and a list without types forces us to guess. Missing outlet details also make it hard to say which distributor should act on a finding.
- Current price list and printed prices
- Your price list and the printed price on each part's packaging or label. The shelf-price comparison needs both to say whether a difference is the distributor's margin, an old label or a copy of your pack.
- Existing display material and artwork files
- Posters, counter mats, rack headers and the editable files behind them. We check what is already in the outlets before designing new material, so you do not pay to replace something that only needed to be put up in the right place.
- A named field contact and an approver
- One person who can send photographs from counters and one who can approve a standard or a fitment line. When these roles are unfilled, evidence arrives late and approvals stall, and the audit becomes a set of photographs that nobody acts on.
How it works
How the retail execution and merchandising work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Outlet types and priority part numbers
You tell us which outlet types matter, which distributors serve them and which part numbers need to be found first. We agree the sample of counters and whether the evidence will come from visits by your field team, from dated photographs sent by distributors' salespeople, or from both.
- 2
First audit of the counters
Current shelf conditions are recorded against a draft of the standard. Any finding that is unclear, such as a part stored in a back room on purpose, goes to your sales contact for a reading before it becomes a point raised with a distributor or a shop owner.
- 3
Standard tested at real counters
The draft standard is tried with a few shop owners and workshop managers to see whether it fits their walls and racks. Their objections are recorded. You approve the standard for each outlet type only after those counters have shown it can be done.
- 4
Fitment chart and artwork approval
Fitment charts, counter catalogue pages and any display artwork are drafted from the data you provide. Your technical and sales leads approve them line by line. Dimensions are checked against the actual space in each outlet type before anything goes to a printer.
- 5
Field team and distributor handoff
Your field staff and distributor salespeople receive the checklist, the fixed photograph angles and the placement guidance. We agree who sends evidence, who reviews it and where a stock or display problem is reported so it does not stay with the person who spotted it.
- 6
Recheck against the first record
Follow-up visits or photographs are set beside the first audit. You read what changed, outlet by outlet, against the figures recorded before the work began, and decide which outlets need another visit, new stock or a conversation with the distributor.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Do you visit every spares shop that stocks our parts?
Can you stop a distributor selling our parts below the printed price?
Will this help us deal with copied parts in similar boxes?
Does this cover OEM supply to vehicle makers?
Will a better display raise our sales?
What do you need from our factory to start?
How long is the contract?
How soon will we see results?
Who will actually do the work?
From the blog
Further reading for auto parts manufacturers.
6 min read · 10 Oct 2026How manufacturers can generate enquiries from relevant business buyersRelevant RFQs come from buyers who can verify you: real specifications on product pages, matching listings and a quick way to screen requests.
6 min read · 6 Oct 2026How buyers choose a showroom, workshop or parts counterCar, bike, repair and parts buyers send one enquiry to several sellers and pick the first clear answer. See what each buyer checks and where you lose them.
5 min read · 26 Sept 2026Certifications buyers ask for: ISO, test reports and what to show on the websiteShow each certificate with its number, scope, issuing body and validity date, and link the PDF, so a buyer's quality team can check you before they ring.
More for auto parts manufacturers
Related work to consider.
Closest to this: channels and partners
- Dealer network brand visibility for auto parts manufacturers
- Channel partner engagement campaigns for auto parts manufacturers
- Channel governance and conflict management for auto parts manufacturers
- Channel opportunity generation and follow-up for auto parts manufacturers
- Channel partner recruitment for auto parts manufacturers
- Channel sales strategy and route to market execution for auto parts manufacturers
- Channel territory planning for auto parts manufacturers
- Co-operative partner marketing for auto parts manufacturers
Also for auto parts manufacturers
Or start from the overview: sales and marketing for auto parts manufacturers.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.