Skip to content
GullySales
GullySales
Tell us what you need

CNC machining companies · Website

Show your machines, tolerances and materials before the buyer asks.

Website development for a CNC machining company means a site organised by capability, material and industry served. It needs an easy way to send a drawing for a quote, since that is exactly what a buyer needs before they call. GullySales builds and maintains this rather than leaving it as a one-time project.

Tell us what you needor call +91 80958 58589

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Also for CNC machining companies

Sales and marketing for CNC machining companies, the overview.

Last updated 5 Oct 2026.

For CNC machining companies

Where it usually goes wrong, and what we would do.

  • “Capability pages need real numbers, not vague claims”

    A page stating actual tolerance ranges, machine sizes and materials handled converts far better than one describing the shop as high quality and reliable.

  • “A quote request form should accept a drawing upload”

    A contact form asking only for a message forces the buyer to a separate email, adding friction that a direct file upload removes.

  • “Certifications and past work need their own visible section”

    A buyer checking legitimacy looks for quality certifications and examples of completed components before trusting the shop with a drawing.

What we do

What we deliver for CNC machining companies.

Every deliverable, what it covers for you, and the result it is there to produce. Nothing here is an extra.

  1. Pages organised by capability, material and industry

    The site organised by capability, material and the industry a buyer works in, instead of one flat services list.

    Result: A buyer finds their exact need in a couple of clicks.

  2. Quote request form that accepts a drawing upload

    A form that lets a buyer attach a drawing directly when requesting a quote, instead of being redirected to email it separately.

    Result: A buyer ready to send a drawing can do it immediately.

  3. Certifications and past work in their own section

    A visible section listing quality certifications and examples of completed components, for a buyer checking legitimacy before sending a drawing.

    Result: A buyer's first legitimacy check is answered on the site itself.

  4. Capability pages stating real numbers, not adjectives

    Pages stating actual tolerance ranges, machine sizes and materials handled, replacing descriptions like high quality and reliable.

    Result: A buyer evaluates the shop on facts instead of a slogan.

  5. Website maintained as new machinery arrives

    A standing arrangement to update capability pages whenever a machine, certification or material capability changes, not a one-time build.

    Result: The site never shows an out-of-date picture of the plant.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Read the full website design and development page

What the page must show

What a CNC machining shop's website must show before an engineer sends a drawing.

The machine list, with make, axes and bed size
List each machine with its make, number of axes and the largest part it takes. An engineer checks whether the part fits your machine before anything else.
Materials and finishing you handle
Name the materials, such as aluminium, SS 304 and 316, brass, EN8 or titanium, and the finishing you do in-house or through partners, such as anodising or heat treatment.
The tolerance you hold routinely
State the tolerance and surface finish you can hold on a regular run, not the best once achieved. A buyer who finds the figure honest sends a harder drawing.
Inspection equipment and the reports you issue
Name the CMM, height gauges and other equipment, and the reports you give: first article inspection, material test certificate and dimensional report. Auto and medical buyers ask for these early.
File types and confidentiality
Say which files you accept, such as STEP, DXF or PDF drawings, and offer an NDA before the buyer uploads. A drawing is the buyer's property, so say how you handle it.
Parts made, with material, quantity and industry
Show photographs of finished components with the part name, material, batch quantity and the industry served. Do not show a customer's part or logo without their permission.

Who it is for

This is written for these CNC machining companies.

  • Job shops doing contract machining
  • Precision component manufacturers
  • Auto ancillary machining suppliers
  • Aerospace and defence component machinists
  • Machine shops serving medical device makers
  • Prototype and low-volume machining shops
  • Sheet metal and fabrication shops with CNC capability
  • Export-focused precision machining units

Not for

It is not the right fit if.

  • You want a guaranteed Google ranking or a guaranteed number of leads. Nobody honest can promise either.
  • You need enquiries by next week and have nobody to answer them.
  • You want posts and reach reported, not enquiries and orders.

How it works

From your first message to the first report.

No open-ended retainer. Every step gives you something in writing.

  1. First

    Your brief

    You tell us what you need in a few short steps: your business, what you want, where enquiries come from and how they are handled.

  2. After the brief

    A conversation and a written scope

    We read it, then talk with whoever handles your enquiries. If you want our help, the scope, the fee and the reporting come in writing, and nothing starts before you have read them.

  3. Before work starts

    Baseline recorded

    Enquiries by source, reply time, conversion and cost per order, written down so every later report has an honest comparison.

  4. After the baseline

    The first fix goes live

    The fix we agreed to start with is put in place and measured against the baseline, whether that is reply time, a follow-up sequence, the page buyers land on or the handover between marketing and sales.

  5. As agreed

    Report against the baseline

    What moved, what did not, and what changes next, in plain words. How often you get it is set in writing before work starts.

  6. At renewal

    Renew on the numbers

    The term ends and you decide whether to continue from the results. The length is agreed in writing before anything starts.

How the website work runs

  1. 1

    Confirm structure and content

    We agree the site's pages and content needs before design begins, drawing on website strategy where it exists.

  2. 2

    Design the site

    Every page is designed against your brand identity and checked for how it should convert a visitor.

  3. 3

    Build and test

    The site is developed and tested across devices and browsers before anything goes live.

  4. 4

    Load real content

    Actual copy, images and information about your business replace placeholder content before launch.

  5. 5

    Launch and hand over access

    The site goes live with domain, hosting and content management access clearly handed to you.

Why us

Why owners pick GullySales over an agency.

  • Marketing and sales, as one job

    Most agencies stop at the enquiry. We also fix what happens after it: the reply, the follow-up, the quote and the CRM.

  • The person on the first call does the work

    No account managers in between. You are never handed to someone you have not met.

  • A baseline before anything starts

    Your numbers are written down on day one, so every later report compares against something honest.

  • The fee in writing, split three ways

    Our time, your media spend and production on separate lines. You always see what goes to us.

  • No guarantees we cannot keep

    The term is agreed in writing and never a default twelve months. We never promise a ranking or a lead count, because nobody controls those.

  • One office, and we say so

    Nagarbhavi, Bengaluru. We work across India by call and WhatsApp and travel when a session needs to be in person.

#257, 3rd floor, Sri Nanjundeshwara Complex, Nagarbhavi 8th Block, Outer Ring Road. How we work.

Your brief

Tell us what you need, and we will read it before we call.

Eight short steps about your business, what you want and who decides. Most questions are a tap, and you can skip any you would rather answer on the call.

Tell us what you needor call +91 80958 58589

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Tell us what you need
How long does a new website take to build?
It depends largely on how much capability and material content needs to be written and reviewed, so we scope it with you after we have read your brief and spoken to you.
Does the website need regular updates?
Yes, whenever a new machine, certification or material capability is added, since buyers check for current information.
Should we name our customers on the website?
Only with each customer's permission, since many supply agreements and NDAs forbid it. Otherwise name the sector, such as auto ancillary or medical device, and show the part type. A page full of logos you were not allowed to use can end a relationship.
What about buyers who have a sample part but no drawing?
Say on the form that you can reverse-engineer from a sample, what you need them to send and whether the sample is returned. These buyers are common in repair and spares work, and many shops lose them because the form only asks for a file.
How soon would we see more RFQs?
Fixing quote turnaround and the capability page shows within weeks. Ranking for a search such as five-axis machining in your industrial area takes a few months.
Do we need to advertise?
Most shops benefit first from a faster quote response and a clearer website. Advertising helps when you want a specific capability, such as export orders, pushed this quarter.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

From the blog

Further reading for CNC machining companies.

All articles

More for CNC machining companies

Everything else we would do for you.

Closest to this: search and visibility

Also for CNC machining companies

Or start from the overview: sales and marketing for CNC machining companies.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.

Tell us what you need