Skip to content
GullySales

Electroplating and surface finishing units · Follow up systems

Follow every drawing and sample lot until the buyer says yes or says no.

A follow-up system for a plating unit is the written routine that moves an enquiry from a drawing on WhatsApp to a quote, a sample lot, an inspection and a standing order. GullySales sets up the steps, the owner of each step and the record that shows where an enquiry has stopped.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A quality inspector examines plated metal components

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For electroplating and surface finishing units

Where it usually goes wrong, and what we would do.

  • “The quote goes out and then silence”

    A plater sends a rate on a photograph and waits. The purchase head has three other quotes open and forgets which unit asked what. A short question a few days later, about the lot size or the drawing revision, restarts the talk.

  • “The sample lot is the point where work is lost”

    A tempo collects the parts, the line plates them and the lot returns, and no one asks what the buyer found. The buyer inspects, a small defect appears, and the next order goes elsewhere without a word to you.

  • “A rejection reported late costs the relationship”

    If a lot fails thickness or adhesion, the buyer wants to hear it from you first. A quick call with the reason and the rework plan keeps the account. Silence until the buyer discovers it ends it.

  • “Repeat buyers need a nudge too”

    A buyer who sent a lot every few weeks goes quiet. Nobody notices because the diary shows only new enquiries. A note to ask about the next batch costs little and catches a slow drift to a rival.

What we do

What we deliver for electroplating and surface finishing units.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A stage list from drawing to standing order

    Named stages: drawing received, rate sent, sample collected, sample returned, feedback taken, repeat lot. Each has an owner.

    Result: Anyone can see which stage an enquiry has reached.

  2. Follow-up prompts written in plain words

    Short messages for each stage, in the unit's own voice, for a call or WhatsApp.

    Result: The person following up does not have to compose a message from scratch.

  3. A rejection and rework script

    A set of steps for telling a buyer about a failed lot: what was found, what will be redone and who will call.

    Result: A buyer hears bad news from the unit before finding it.

  4. A repeat-buyer watch list

    A list of buyers whose last lot is older than their usual gap, reviewed by the owner.

    Result: Quiet accounts are rung before they are lost.

  5. A lost-enquiry reason log

    Each enquiry that ends without an order gets a reason recorded: price, delivery, finish not offered, no reply.

    Result: The owner sees why work was lost, in the buyer's own words.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The moments in a plating enquiry that deserve a record and a reply.

Drawing received
Log the part, the finish asked for, the quantity and the date. Reply that the drawing is with the unit, and ask for anything missing such as base metal or thickness.
Quote sent
Record the rate basis, whether per piece, per kilo or per lot, and the validity. Write the date of the next call beside it so a quote does not go silent.
Trial lot dispatched
Note the lot size, the process sheet used and the inspection result. Send the report with the lot, and ask the buyer to say when their own check is done.
Buyer's inspection result
Record accepted, rejected or reworked, and the reason in the buyer's words. A late rejection costs the relationship, so ask for the result and do not wait for it.
Order released
Write the part, the standing quantity and the delivery pattern agreed. This is the record that lets the supervisor plan the racks and the tank load.
No reply after a quote
Log a closing message that offers to hold the rate and asks if the job went elsewhere. A buyer who says why gives you the next quote's price.

Who it is for

This is written for these electroplating and surface finishing units.

  • Zinc and zinc-nickel platers serving fastener and auto-part makers
  • Decorative nickel-chrome platers for bathroom fittings and furniture hardware
  • Hard chrome platers for hydraulic rods, rollers and moulds
  • Electroless nickel units for engineering and tooling parts
  • Anodising and hard anodising units for aluminium parts
  • Powder coating and painting lines attached to a plating unit
  • Phosphating and black oxide shops for fasteners and tools
  • Silver and gold platers for electrical contacts and jewellery
  • In-house plating departments that take outside job work

Before you decide

When this may not be the right fit.

  • The quote is made by someone who is rarely at the desk, and a reminder system would not reach them
  • You cannot send a test report with a trial lot, and a follow-up would ask the buyer for a result they have nothing to judge

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for electroplating units: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electroplating and surface finishing units. Anything missing is noted in the written scope, with who will supply it.

A list of open quotes and sample lots
Every quote and sample lot now awaiting an answer, with the buyer and date. A notebook page will do. Without it, we cannot test the routine on live work. Add the finish and the lot size where you remember them, since a reminder that names the part gets a reply and a reminder that says quote does not.
Your rejection and rework notes
Notes on lots returned and how the buyer was told. They show the time lag between a rejection and the call. Without them, the rejection script is written blind. Include any buyer who stopped after a rejection, because the call after a failure is the hardest and the one worth scripting first.
The names of repeat buyers
A list of buyers who send standing orders and the usual gap between lots. From memory is acceptable. Without it, the repeat-buyer watch list is drawn only from invoices. Include the finish those buyers send and the person who places the order, so the nudge reaches the right desk.
A person who owns the follow-up sheet
One person who reads the open items and asks about stalled quotes. The owner or office head. If nobody owns it, the sheet grows and nobody reads it. Give that person the authority to ask the owner about any quote that has stood still, since a sheet without authority is an ornament.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Map where quotes stop moving

    We take the last quotes and sample lots and mark where each went quiet: after the quote, after the sample, after a rejection. You tell us what you did at each stop. The count of quotes with no second contact is the figure we read against later. We note which quotes went out just before a holiday or a plant shutdown, only to see whether they bunch there, and we set no timing from them.

  2. 2

    Write the stages from drawing to standing order

    We set the stages: drawing received, quoted, sample lot sent, inspection result, standing order. You name who moves a buyer from one to the next. A stage with no owner is not accepted, since an unowned stage is where quotes go quiet. We write the handover rule for when the owner is away, so a reminder does not wait for one person.

  3. 3

    Draft the prompts in the office's own words

    We write short prompts for each stage in the words your staff already use with buyers, covering the quote nudge, the sample lot call and the rejection note. You read them aloud. A prompt that sounds like a brochure is rewritten.

  4. 4

    Test the routine on live quotes

    We apply the routine to quotes now open and watch what the office does when a reminder comes. You decide what to change. A reminder that is ignored in the first test is removed, not repeated.

  5. 5

    Compare second contacts and repeats with the start

    After the routine has run we count quotes that had a second contact, sample lots that were followed and buyers who returned, against the starting figures. You decide which prompts to keep and which stages to merge.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Who should follow up, the owner or an executive?
The owner for large accounts and rejections, a named executive for drawings and sample lots. What matters is that each enquiry has one named person, written in the record, so it is never everyone's job and therefore nobody's.
How frequently should we chase a quote?
No single rhythm suits every buyer. Ask at the quote what the buyer's decision date is, write it down, and follow up around that date. Chasing without a reason annoys a purchase head, while a useful question is welcome.
What should we write after a rejected trial lot?
Ask what failed and see the part before you reply. State the cause once you know it, such as pretreatment or bath chemistry, and say what changes on the next lot. A report that names the fault earns a second trial where an apology alone does not.
How do we follow up with a buyer who never answers?
Ask once, in a message, whether the job is still open, and offer to close the quote. A purchase head who is silent may have the work held up elsewhere. A clear closing note keeps the door open and tells you when to stop.
What should we do with a buyer who never answers?
After the quote prompt and one more contact by a different channel, mark the quote as lost with a reason and move on. Record what was said and whether the silence suggests the buyer chose another plater. A lost-enquiry log teaches you more than a long chase, and the buyer may return when the part is rejected elsewhere.
What should a rejection message say?
It should say which lot, what failed, what you propose and who will call. It is sent promptly, in plain words and with the evidence. Blame and long explanations lose the buyer. We write a model message with you and add a rule on who may send it and who approves it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.