Skip to content
GullySales

Electroplating and surface finishing units · Pay per click advertising

Pay only for the searches that come from buyers with a part to plate.

Google Ads for an electroplating unit means showing your line to the buyer who types a finish and a location at the moment they need a plater. GullySales chooses the finishes and areas to bid on, blocks searches from students and equipment buyers, and counts calls and drawings as the enquiries.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A quality inspector examines plated metal components

What pay per click advertising means

Pay per click advertising (PPC) is paying a fee each time someone clicks your advert on Google or another platform. It puts you at the top of a search page immediately, instead of waiting for ranking to build. GullySales sets the targeting, writes the ad text and checks spend against enquiries received.

Last updated 14 Nov 2026.

For electroplating and surface finishing units

Where it usually goes wrong, and what we would do.

  • “Chemical and machinery buyers click your ad”

    People looking for plating chemicals, rectifiers or a plant to buy search with the same words as a buyer of job work. Without blocks, you pay for them.

  • “The ad lands on a general home page”

    A buyer who searched for anodising reaches a page that opens with zinc. The buyer leaves, and the click is wasted.

  • “A call is not counted as an enquiry”

    The calls and WhatsApp drawings are what a plating unit lives on. If they are not counted, you cannot tell which search paid.

What we do

What we deliver for electroplating and surface finishing units.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A finish-by-finish campaign structure

    A separate set of ads for zinc, hard chrome, anodising and the rest, so each ad speaks about one finish and one page.

    Result: The buyer sees the word they typed in the ad and on the page.

  2. A block list of wrong searches

    Searches for courses, kits, chemicals, machinery and jobs are listed and blocked, and the list is reviewed against what actually came in.

    Result: Money stays with buyers who have a part.

  3. Finish pages built to take the click

    Each ad lands on its own page with photographs, the base materials, the test proof and a form that asks for the drawing.

    Result: A clicking buyer has a reason to send a drawing.

  4. Call and WhatsApp tracking

    A tracked number and a WhatsApp link on every ad page, with a record of who called and what finish they asked for.

    Result: You can say which search brought which call.

  5. Area targeting around your gate

    Ads shown to the industrial areas you can collect from, and held back from places you do not serve.

    Result: Clicks come from buyers your van can reach.

How the result is measured

  • Cost per click
  • Cost per enquiry
  • Enquiries from paid search

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches to bid on and block

Decide which searches pay your line and which only cost you clicks.

Each row is a kind of search. Bid on the ones that mean a buyer with a part, block the ones that do not.

Bid: finish plus job work plus area
Zinc plating job work Peenya, hard chrome plating Ambattur. Send the click to the matching finish page, and count a call or a drawing sent as the enquiry.
Bid: a fault the buyer is facing
Searches such as plating peeling off or white rust on zinc plated parts mean a buyer with a rejected lot. Send the buyer to the article that explains it and then to the form.
Block: courses, kits and training
Searches for electroplating course, plating kit or how to plate at home come from students and hobbyists. Add them to the block list on day one.
Block: chemicals, rectifiers and plant
A buyer of anodes, chemicals or a rectifier is a supplier's customer, not yours. Block the words and review the search report for new ones.
Block: jobs and vacancies
Searches that include job, vacancy or salary come from job seekers. Block them so your ad is not shown to people who want employment.
Count: a real enquiry
A real enquiry is a call that lasts long enough to discuss a part, or a drawing or photo sent with a finish named. Record it against the search that brought it.

Who it is for

This is written for these electroplating and surface finishing units.

  • Zinc and zinc-nickel platers serving fastener and auto-part makers
  • Decorative nickel-chrome platers for bathroom fittings and furniture hardware
  • Hard chrome platers for hydraulic rods, rollers and moulds
  • Electroless nickel units for engineering and tooling parts
  • Anodising and hard anodising units for aluminium parts
  • Powder coating and painting lines attached to a plating unit
  • Phosphating and black oxide shops for fasteners and tools
  • Silver and gold platers for electrical contacts and jewellery
  • In-house plating departments that take outside job work

Before you decide

When this may not be the right fit.

  • You cannot tell which enquiries became trial lots, so the spend on each finish could not be judged
  • Your line is full and cannot take a new buyer, and clicks would only be turned away

Before you decide

Agree the work. Know how to judge it.

Google Ads for electroplating and surface finishing units: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring search-term reports, conversion definitions, and the sales outcome of past enquiries where available. Identify products, locations, and enquiries you cannot serve.

Make the scope clear

Choose the offer and landing page before setting a media budget. Agree who pays the platform, which actions count as conversions, and how unsuitable searches will be reviewed.

Check the work in use

Trace a test enquiry from the advert to the sales record. Review qualified enquiries and orders alongside spend, and separate duplicates or spam from genuine buyer demand.

Know when to change course

If the advert generates enquiries that do not fit, revise targeting and qualification before increasing spend. If suitable enquiries are lost after contact, work on the sales process.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electroplating and surface finishing units. Anything missing is noted in the written scope, with who will supply it.

A list of finishes with free tank time
A short note from the supervisor of the finishes where more work can be taken. Do not list a finish that is booked up. If the list is missing, ads may bring work you cannot deliver, which harms existing customers. The supervisor should also say which finishes are seasonal, because a festive rush in fasteners or fittings can fill a line for weeks without warning.
Owner access to the advertising account
If an account exists, give us an invitation as manager. If a vendor created it in their own name, we begin a new one in the unit's name. Without the history, we cannot see which searches wasted money before.
The people who will answer calls
Name the person at the gate or office who takes calls when the owner is on the floor. They need a script and a phone with the call log. If no one is named, calls from ads go unanswered, and the budget buys missed calls.
Your minimum lot and part-size rules
Write the smallest lot you accept and the biggest part the line takes. These appear in the ads and on the pages. Without them, ads draw hobbyists and one-off parts that the unit would turn down.
A decision on spending ceilings
The owner decides the highest sum to spend on the first test and who may change it. Leave nothing open for us to guess. If undecided, we run the smallest test, which gives fewer searches to learn from.

How it works

How the pay per click advertising work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Agree which tanks may take more work

    We sit with you and the production supervisor and mark which finishes have free capacity now. You decide how much new work each line can take before delivery to existing customers suffers. Ads are planned only for those finishes, and the calls recorded for them before the work are the starting figure.

  2. 2

    Write the list of searches to block

    We build the block list from your own experience of wrong callers: students writing project reports, buyers of plating chemicals, rectifier sellers, job seekers. You add the ones we miss. Every block word is a click you do not pay for, and the list grows as search reports come in.

  3. 3

    Check the landing page for each finish

    Each ad leads to the page for its own finish, and we open them on a phone beside you. You confirm the part sizes, base metals and test proof are right. An ad whose page is not ready waits, since a click that lands on a general home page is wasted.

  4. 4

    Set up call and drawing tracking

    We put a call button, a WhatsApp link and a form on each landing page and tag each with its source. You decide who answers the calls and what counts as an enquiry: a drawing, a part photograph or a quantity. Tracking is tested with real calls from two phones before spending starts.

  5. 5

    Release one finish and read the search report

    We start with one finish and a modest budget ceiling you approve. After clicks arrive we read the search report with you, line by line, and add wrong searches to the block list. You see what buyers typed, which rarely matches what was expected.

  6. 6

    Compare calls and drawings with the starting figure

    We match the calls, drawings and quotes that came from the ads with the count recorded before the work and with the lots booked. You decide where the money goes next: more of the same finish, another finish, or a pause while the tank is full.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we bid on our own unit's name?
Yes, at low cost, if a rival also bids on your name. It keeps the top spot for buyers who already know you. Check the search report to see whether anyone else is bidding.
Is a call-only ad worth trying?
For a plating unit, yes, because buyers phone with a drawing in hand. Show the ad only during hours when a person answers, and log each call so you can tell a real enquiry from a wrong number.
How do we stop job seekers clicking our ad?
Add words such as job, vacancy, salary and hiring as negative keywords. Check the search terms report from time to time, because new wrong searches appear.
How do we track calls that come after an ad?
Use a number that appears only on the ad pages, and ask each caller what finish they need. Write both in the enquiry record. Check Google's current rules on call tracking.
Should we use the name of a competing plater as a keyword?
We advise against it. It invites a dispute, costs more per click and attracts buyers loyal to the other unit. Better to bid on finishes and areas, where buyers have not chosen a plater. If you still want to try, say so, and we will set it as a separate small test with its own count so the result is plain.
What if our engineer is already running ads?
Then we start by reading what has been built, with the engineer's consent, before changing anything. Where the structure is sound, we keep it and add tracking and the block list. Where it is not, we explain why and propose a rebuild. The account stays in the unit's name, whoever runs it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.