Skip to content
GullySales
GullySales
Tell us what you need

Rubber manufacturers · Website

Let a buyer submit an RFQ with a drawing attached, not just send a generic message.

Website design for a rubber manufacturer means a site that clearly states machine capability, certifications and product categories, with an RFQ form that accepts technical drawings directly. GullySales builds this so a serious buyer can move straight to a detailed enquiry.

Tell us what you needor call +91 80958 58589

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of rubber manufacturers at work in India

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Also for rubber manufacturers

Sales and marketing for rubber manufacturers, the overview.

Last updated 5 Oct 2026.

For rubber manufacturers

Where it usually goes wrong, and what we would do.

  • “An RFQ form should accept file attachments”

    A buyer ready to send a technical drawing should be able to attach it directly to an enquiry form. Being told to email it separately just adds friction and delay.

  • “Capability pages need specifics, not adjectives”

    A page stating machine list, tolerances achievable and certifications held gives a buyer concrete information to evaluate, which general claims about quality do not.

  • “Export information deserves its own clear section”

    A page addressing compliance, packaging and shipping for export orders answers a question that a purely domestic-focused website leaves unaddressed.

What we do

What we deliver for rubber manufacturers.

Every deliverable, what it covers for you, and the result it is there to produce. Nothing here is an extra.

  1. RFQ form built to accept a technical drawing

    A form letting a buyer attach a drawing directly to an enquiry, instead of being told to email it separately.

    Result: A buyer ready to send specifications does not have to leave the site.

  2. Capability pages stating machine list and tolerances

    Pages stating your actual machine list, achievable tolerances and certifications held, replacing general claims about quality.

    Result: A buyer evaluates the factory on facts instead of adjectives.

  3. Export section on compliance, packaging and shipping

    A dedicated section answering compliance, packaging and shipping questions for export orders, separate from domestic product information.

    Result: An international buyer's sourcing questions are answered on the site.

  4. Site built for your team to update themselves

    The website structured so your team can update product categories, certifications and capacity information themselves, without needing a developer each time.

    Result: A new certificate goes up the day it arrives.

  5. Product pages matching your directory listings

    Website pages for each product category kept consistent with your IndiaMART and TradeIndia listings, so nothing contradicts across platforms.

    Result: A buyer moving between the website and a directory sees one story.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Read the full website design and development page

What the page must show

What a rubber manufacturer's website must show before a buyer sends a part number or drawing.

Compounds with hardness and temperature range
List EPDM, nitrile, silicone and neoprene with the Shore A range and working temperature of each. Design engineers filter on compound before maker.
Compound mixed in-house or bought in
Say whether you mix your own compound and test each batch, or buy it ready. A buyer chasing consistency prefers to know.
Moulding methods and press range
State whether you do compression, transfer or injection moulding, the presses you run and the largest part you can mould.
Tests you run and the method used
Name the tests, such as hardness, tensile and compression set, with the ASTM or IS method followed, and say a test report can go with a batch.
Sample parts with the application
Show gaskets, seals, bellows and bushes with the industry they serve, such as pumps, railways or automotive. Ask each customer before naming them.
Documents sent with an export order
List what goes with the shipment: certificate of conformity, material test certificate, packing list. Add how parts are packed and labelled.

Who it is for

This is written for these rubber manufacturers.

  • Custom moulded rubber component manufacturers
  • Industrial gasket and seal manufacturers
  • Conveyor belt manufacturers
  • Tyre retreading material suppliers
  • Rubber-to-metal bonded parts manufacturers
  • Export-oriented OEM suppliers

Not for

It is not the right fit if.

  • You want a guaranteed Google ranking or a guaranteed number of leads. Nobody honest can promise either.
  • You need enquiries by next week and have nobody to answer them.
  • You want posts and reach reported, not enquiries and orders.

How it works

From your first message to the first report.

No open-ended retainer. Every step gives you something in writing.

  1. First

    Your brief

    You tell us what you need in a few short steps: your business, what you want, where enquiries come from and how they are handled.

  2. After the brief

    A conversation and a written scope

    We read it, then talk with whoever handles your enquiries. If you want our help, the scope, the fee and the reporting come in writing, and nothing starts before you have read them.

  3. Before work starts

    Baseline recorded

    Enquiries by source, reply time, conversion and cost per order, written down so every later report has an honest comparison.

  4. After the baseline

    The first fix goes live

    The fix we agreed to start with is put in place and measured against the baseline, whether that is reply time, a follow-up sequence, the page buyers land on or the handover between marketing and sales.

  5. As agreed

    Report against the baseline

    What moved, what did not, and what changes next, in plain words. How often you get it is set in writing before work starts.

  6. At renewal

    Renew on the numbers

    The term ends and you decide whether to continue from the results. The length is agreed in writing before anything starts.

How the website work runs

  1. 1

    Confirm structure and content

    We agree the site's pages and content needs before design begins, drawing on website strategy where it exists.

  2. 2

    Design the site

    Every page is designed against your brand identity and checked for how it should convert a visitor.

  3. 3

    Build and test

    The site is developed and tested across devices and browsers before anything goes live.

  4. 4

    Load real content

    Actual copy, images and information about your business replace placeholder content before launch.

  5. 5

    Launch and hand over access

    The site goes live with domain, hosting and content management access clearly handed to you.

Why us

Why owners pick GullySales over an agency.

  • Marketing and sales, as one job

    Most agencies stop at the enquiry. We also fix what happens after it: the reply, the follow-up, the quote and the CRM.

  • The person on the first call does the work

    No account managers in between. You are never handed to someone you have not met.

  • A baseline before anything starts

    Your numbers are written down on day one, so every later report compares against something honest.

  • The fee in writing, split three ways

    Our time, your media spend and production on separate lines. You always see what goes to us.

  • No guarantees we cannot keep

    The term is agreed in writing and never a default twelve months. We never promise a ranking or a lead count, because nobody controls those.

  • One office, and we say so

    Nagarbhavi, Bengaluru. We work across India by call and WhatsApp and travel when a session needs to be in person.

#257, 3rd floor, Sri Nanjundeshwara Complex, Nagarbhavi 8th Block, Outer Ring Road. How we work.

Your brief

Tell us what you need, and we will read it before we call.

Eight short steps about your business, what you want and who decides. Most questions are a tap, and you can skip any you would rather answer on the call.

Tell us what you needor call +91 80958 58589

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Tell us what you need
How long before we can send buyers to the new site?
It depends on how much technical detail we need to gather from your production and quality team to get it accurate. We can tell you what is realistic for your site after the first conversation.
Can our team update it later?
Yes, we build it so your team can update product categories, certifications and capacity information without needing a developer each time.
Can the form take a part number or a photograph of the old gasket?
Yes, and it should. Many buyers have a worn part and no drawing. Let them upload a clear photograph with a ruler beside it, and ask for the machine it came from and the material if known. Your engineer can then ask for a sample before quoting.
Should we show a catalogue of standard O-rings and seals with sizes?
If you stock or regularly make standard sizes, yes. Give a table in both inch and metric, with compound options, and a button to request a quote. Buyers of standard parts search by size, so a size table brings enquiries a custom page never would.
Do we need to advertise?
Rarely at first. A complete IndiaMART listing and product pages for each compound reach buyers who are already searching. Paid search helps later for standard parts with steady demand, such as O-rings in common sizes.
Should we list every compound we mould, like EPDM, nitrile and silicone?
Yes, each with its own page. An engineer searches for "EPDM gasket manufacturer" or "food-grade silicone moulding", not for a rubber company. Each page names the hardness range, and the tests you hold certificates for.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

From the blog

Further reading for rubber manufacturers.

All articles

More for rubber manufacturers

Everything else we would do for you.

Closest to this: search and visibility

Also for rubber manufacturers

Or start from the overview: sales and marketing for rubber manufacturers.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.

Tell us what you need