Skip to content
GullySales

Real estate developers and brokers · Marketing data management

The portal says one buyer, the broker sheet says two, and the register says none.

Marketing data management for a developer or broker is the set of written rules that decides where a buyer's name came from, what each field means and which record survives when the same family appears twice. GullySales audits the sheets, portal exports and sales register you hold, writes the rules down, and sets up the tags so every new enquiry arrives in the same shape.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A specialist reconciles contact records and source folders at a workstation

What marketing data management means

Marketing data management keeps the data your marketing runs on usable: contact lists with recorded sources, agreed field definitions, one naming scheme for campaign links, duplicate rules and opt-out flags. GullySales audits what you hold, writes the rules down in a short data dictionary, and sets up the sheets or tool settings so your team applies them the same way.

Last updated 14 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For real estate developers and brokers

Where it usually goes wrong, and what we would do.

  • “A launch weekend fills five different files”

    The sales office writes names in a register, the broker network sends a forwarded list, the portal exports a spreadsheet and the ad form lands in an inbox. Nobody has agreed which file is the master, so each report counts a different crowd.

  • “The same family arrives under two surnames”

    A couple enquire separately, one with a maiden name and one with the married name, from two numbers. Without a matching rule, both get called with different quotes, and the family notices before the sales head does.

  • “Source labels drift until the report is useless”

    One executive types the portal name in full, another writes a short form, a third leaves the field blank for a walk-in. The channel report then shows sources that do not exist and hides the ones that matter for the next campaign decision.

  • “An opt-out given on a call never reaches the broker list”

    A buyer asks to stop receiving project messages, and the request stays in a call note. Next month a channel partner sends the same buyer a new launch offer. A single do-not-contact flag, held in one place, prevents that.

What we do

What we deliver for real estate developers and brokers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A list of every place buyer data sits

    The sales register, the portal logins, the broker sheets, the ad accounts, the site-visit forms and the personal phones of the pre-sales team, each with a named owner.

    Result: You can point to every place a buyer's name is stored.

  2. A short data dictionary for the sales office

    One written meaning each for enquiry, site visit, hold and booking, plus the allowed values for configuration, budget band and loan status.

    Result: Two executives record the same visit in the same words.

  3. A fixed source and campaign tag list

    Portal, broker, walk-in, hoarding, ad form and referral entered from a closed list, with a naming pattern for every campaign link.

    Result: The channel report stops showing sources nobody ran.

  4. Duplicate and merge rules

    Which fields match two records, which record survives, and how a household is linked when family members enquire on different numbers.

    Result: A repeat enquiry updates a record rather than creating a new one.

  5. An opt-out and consent flag in one place

    A field that every list and every channel partner export reads before a message goes out, with the rule for who updates it. Check with your own adviser what consent wording your project needs.

    Result: A buyer's request to stop is visible to the whole team.

  6. Clean-up of the existing lists

    The old registers and broker sheets standardised to the new fields, with unclear rows marked unknown instead of guessed.

    Result: Past launch lists can be used for the next phase.

How the result is measured

  • Contacts with a recorded source and date added
  • Source and campaign values outside the agreed list
  • Duplicate pairs awaiting a reviewer's decision

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these real estate developers and brokers.

  • Residential apartment developers
  • Villa and plotted development builders
  • Commercial and office space developers
  • Independent brokers and channel partner networks
  • Redevelopment and rehabilitation projects
  • Plot and land aggregators
  • NRI-focused residential projects
  • Affordable and mid-income housing developers
  • Luxury and premium residential developers

Before you decide

Agree the work. Know how to judge it.

Marketing data management for real estate developers and brokers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring the current target, pipeline, and review format. Mark which decisions the manager can make and which still require the owner's approval.

Make the scope clear

Agree decision rights and the management routine, including who runs it after the engagement. Separate advice to your sales head from taking responsibility for an agreed part of the operation.

Check the work in use

A useful review ends with an owner and next action for the deals or constraints discussed. Revisit those actions before adding more dashboard measures.

Know when to change course

If a review only collects updates already available in the CRM, shorten it. Use the time to resolve a blocked decision or coach a specific piece of selling work.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from real estate developers and brokers. Anything missing is noted in the written scope, with who will supply it.

Every export and sheet you can find
We need the files themselves, however messy: the portal exports, the broker lists and the sheets on executives' laptops. Hidden files cannot be cleaned and will return to cause duplicates. We note what we were not given.
The person who keeps the register
Someone enters the data in the register. Bring them to the definitions session, since they know how the fields are really used. Without that person, the dictionary will describe an ideal and not the work.
A decision on the surviving record
When the same family appears twice, one record must survive. Decide with the sales head which wins: the earliest entry, the fullest entry or the one with a visit. If you do not choose, the merge will be argued case by case.
Consent wording on the site visit sheet
The wording a buyer agreed to decides how the data may be used. Bring the form text. We do not judge what consent your project needs, which is for your adviser, but we need to know what exists. If forms differ between the portal, the site office and the website, bring each version.
Broker lists and the terms they came under
Partners may supply lists of buyers, and some of those lists are old. Bring them with the terms or messages that came with them. Where the origin is unclear, the records are kept apart and marked until your adviser decides.

How it works

How the marketing data management work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List every place a buyer's name is kept

    We begin by finding all the places where buyer data lives: portal exports, broker sheets, executive phones, the visit register, the CRM and the booking file. You tell us who maintains each. What exists afterwards is a single inventory, and it shows files that nobody knew still existed. Files on executives' phones and personal email are asked for by name, so that nothing is left out because it was never on a shared drive.

  2. 2

    Agree what each field means

    With the sales head and the person who keeps the register we agree the definitions: what counts as an enquiry, a visit, a qualified buyer and a booking, and what the source field may contain. You approve a short data dictionary. The definitions end the arguments over whose numbers are correct. We also write down which questions the definitions must answer for your reports, such as how many visits became bookings by source.

  3. 3

    Clean and merge the existing lists

    We bring the lists into one shape, find the same family entered under two surnames or two numbers, and apply the merge rule you have agreed. You review a sample of the merges before they are made final. Records that cannot be matched are kept as they are and marked. Phone numbers are brought to one format and the surname spellings that differ between the portal and the register are listed beside each other.

  4. 4

    Fix the source and campaign tags

    We write a closed list of source and campaign tags, for portals, partners, walk-ins, hoardings, cinema and each ad, so that every new enquiry arrives labelled the same way. You decide who may add a tag. Without a closed list, the reports break the moment someone invents a label. The tag list also records which campaign a tag belongs to and when it started, so a report can separate one launch from the next.

  5. 5

    Trace opt-outs from the call to the list

    We test what happens when a buyer says on a call that they do not wish to be contacted: we follow the instruction through the CRM, the broker list and the mailing list. You see where it fails. The flag is made to live in one place, and every other list reads from it. We also test a broker who removes a buyer from a shared list, to see whether your own record learns of it.

  6. 6

    Hand over the routine that keeps it clean

    We write the short routine for whoever looks after the data: checks on new entries, the tag list, the merge rule and the opt-out flag. You name the person. A later check compares the new enquiries against the rules, to see whether the shape is holding. The routine also says what to do when a launch brings a flood of new entries.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

We keep leads in the CRM already. Why do we need this?
A CRM holds whatever the team types into it. If source names and unit types are free text, the reports are only as consistent as the least careful executive. We set the field rules first, then check the CRM settings match them.
Do you decide what consent wording our project needs?
No. Rules on consent and on real estate advertising differ by profession and state, so your own lawyer or adviser decides the wording. GullySales builds the field that records the answer and the routine that respects it.
Can broker-supplied lists be cleaned too?
Yes, once they arrive in a fixed template. We agree the template with the partner network, mark the partner and date on every row, and flag buyers already in your records, so the claim question is settled by the log.
Why can't the CRM keep the data clean by itself?
A CRM stores what people type into it, and it follows the same loose habits unless rules exist behind it. If one executive writes a source as portal and another as 99, the reports split. The dictionary, the closed tag list and the merge rule are what the CRM needs in order to behave. We set those rules first, and then the CRM can enforce them with required fields and drop-down lists.
How long does the data stay clean after you leave?
It stays clean only if a named person runs the short routine we hand over and new executives are taught the dictionary. Drift begins when a launch brings a flood of enquiries and people type in a hurry. We therefore keep the routine small, and place the checks at the point of entry, where a wrong tag is stopped by a required field. The routine has a place for a review whenever you change a tool.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.
What if we are not happy with the work?
Tell us and the plan changes. Everything is reported against the baseline, so a number that is not moving is visible to both sides. The term is in your written scope, and the refund and cancellation policy sets out the rest.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.