Skip to content
GullySales

Hospitals · Revenue technology stack audit and architecture

Know which system holds the enquiry before you buy another one.

A revenue technology stack audit for a hospital lists the software that touches an enquiry, from the website and call tracker to the appointment tool, the CRM and the hospital information system, and shows how records move between them. GullySales delivers a written blueprint naming the main enquiry record, what to keep and what to drop, with the patient-data boundary marked.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of hospitals at work in India

What revenue technology stack audit and architecture means

Revenue technology stack audit and architecture is a review of your sales and marketing software and a plan for how its records should connect. GullySales maps the tools you pay for, traces enquiries through them, and delivers a written blueprint showing which system holds the customer record and what needs to change.

Last updated 14 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For hospitals

Where it usually goes wrong, and what we would do.

  • “Software arrives department by department”

    A hospital's tools are bought at different times for different reasons: a booking widget for the website, a call tracker for the marketing agency, a messaging subscription for the front desk and a separate package for health checkups. Each works alone. Nobody has drawn the whole set, so two tools may record the same enquiry differently and a third may be paid for and unused.

  • “The hospital information system is not the marketing record”

    The system that holds registrations, orders and billing is built for care and accounts, not for tracking where a call came from. Copying marketing data into it clutters a clinical record, and copying clinical data out of it into marketing tools is a privacy risk. A good blueprint decides what crosses the boundary, in which direction and who approves it.

  • “Records are retyped between desks”

    A family fills a web form, the call centre rewrites it into a sheet, and the admissions desk enters it again at registration. Each retyping loses the source and the department, and invites mistakes in the phone number. Mapping these copy steps shows where one connection would save the work and where a person is still needed for judgment.

  • “Accounts belong to people who have left”

    A listing, a form tool or an advertising account opened by a former employee or an agency may still hold enquiries and be billed to a card nobody watches. The audit checks who owns every login, because an enquiry that lands in an account nobody opens is a lost admission, and a departing manager takes the knowledge with them.

What we do

What we deliver for hospitals.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Tool and subscription register

    A list of every in-scope tool with its purpose, the department that uses it, the account owner, the billing date and whether anyone logged in recently. You check it against invoices and administrator views, so missing accounts and unexplained renewals come to light.

    Result: Each tool on the list can be matched to an invoice or an admin screen.

  2. Enquiry route map

    A diagram showing how a call, form, WhatsApp message or referral travels from first contact to a registered admission, naming the tool and the person at every step. Manual copying is marked in a different style from automatic transfer.

    Result: The admissions manager can trace one real enquiry along the drawn route.

  3. Field and connection map

    A table showing what moves between tools: contact, department, source, assigned desk and stage. It states which fields arrive, which are lost and which have not been tested, so unverified connections are marked as such.

    Result: Every connection is marked tested, untested or absent.

  4. Patient-data boundary sheet

    A one-page statement of what may sit in marketing tools, what must stay in the hospital information system and what may be sent between them, with an owner for each rule. Your own data protection adviser reviews it before it is used.

    Result: Each rule has a named owner and a recorded approval from your adviser.

  5. Overlap and gap assessment

    A comparison of tools doing the same job and of jobs nobody covers, such as recording the referral source. Each recommendation points to what was observed, and a tool is never recommended for removal without the evidence of how it is used.

    Result: Each keep, drop or add recommendation cites the observation behind it.

  6. Target architecture blueprint

    A written plan naming the main enquiry record, the tools to keep and the order in which to change things, with the likely effect on staff routines noted beside each step. The plan is a set of decisions for you to take, not work already done.

    Result: You can see which tool holds the master record and why.

How the result is measured

  • Subscription spend and tools in active use, recorded before changes
  • Manual re-entry points across the agreed enquiry routes
  • Enquiries retaining their original source and assigned salesperson

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these hospitals.

  • Multi-speciality hospitals
  • Single-speciality hospitals, maternity, orthopaedic or eye
  • Nursing homes
  • Day-care surgery centres
  • Corporate hospital chains with several branches
  • Diagnostic-centre-led hospitals
  • Hospitals attached to medical colleges
  • Government-empanelled private hospitals

Before you decide

Agree the work. Know how to judge it.

Revenue technology stack audit and architecture for hospitals: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from hospitals. Anything missing is noted in the written scope, with who will supply it.

Invoices and renewal notices for software
These reveal tools nobody mentions. Without them, the register depends on memory, and an old subscription keeps renewing. Ask accounts for the last set of invoices and card statements covering anything that touches enquiries, including small small recurring charges for forms, messaging and tracking that no department claims.
Admin access to the website, listings and advertising accounts
Read-only access lets us see forms, tracking and connections as they are. If the logins sit with a former agency or employee, that is itself a finding, and recovering them comes first.
A description of the hospital information system
Not the data, only what the system does and whether it has an exported report or an interface. Without it, the boundary sheet cannot say what may safely cross, and any integration advice stays provisional. If a vendor manual or a support contact exists, bring that too, because it tells us which exports and interfaces the system really offers.
The front desk and call centre routines
Someone who can show how an enquiry is taken, written down and passed on. Without a walk-through, the route map shows the intended process and not the real one, and the real one is where records are lost. Ask the desk staff to bring the notebook, sheet or phone they actually use, since the habits around it matter as much as the software.
Your data protection adviser's name
The boundary sheet needs a review from the person who answers for patient data. If nobody holds that role, the sheet is produced as a draft and marked unreviewed, and no connection touching patient data should be built from it.

How it works

How the revenue technology stack audit and architecture work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Scope, access and confidentiality terms

    After your requirements brief and a conversation with the administrator, we agree which tools and enquiry routes to examine. The written scope sets out the access you will grant, read-only admin views where the tool offers them, and the fee and term. Patient-identifying screens are excluded or masked.

  2. 2

    Inventory built from invoices and logins

    Account owners share invoices and admin views, and we compare these with how the front desk, the call centre and marketing say they use the tools. Differences are written down and returned to you to confirm, so the register is agreed and not assumed.

  3. 3

    Sample enquiries traced through the tools

    Selected won and lost enquiries, with identity masked, are followed through every system they touched. The admissions manager confirms the actual handovers, and test submissions show which fields travel correctly and which vanish on the way.

  4. 4

    Boundary rules drafted with your adviser

    We draft the patient-data boundary and your own adviser reviews it. We adjust it where the adviser objects. Nothing in the blueprint puts clinical data into a marketing tool, and any step that would is removed, whatever the saving.

  5. 5

    Blueprint options and trade-offs

    We set out the proposed main record and the reasons to keep or remove each tool, with the cost and staff effort of each option as you give them to us. You review the trade-offs with the administrator and the head of the front desk before anything is settled.

  6. 6

    Handover and reading against the baseline

    The final session reads the blueprint against the starting facts recorded earlier: the number of tools, the copy steps and the unowned accounts. You decide which changes to commission. Building or connecting tools is separate work and is quoted separately.

Proof

Published examples of our work.

Real clients and the work recorded for each engagement. These examples may cover related services or industries. They show the method, not a guaranteed result.

All case studies
  • Chord Road Hospital

    Situation
    Patients who knew the hospital trusted it. Patients who searched for a department or a treatment in the area did not find it.
    What we did
    • Website rebuilt around patient needs
    • Search visibility
    • Social media on a schedule
    • Review management
    Result
    • Organic traffic increased 60% within six months
    • Online appointment bookings increased 40%
    • Social following grew 45%, and engagement on it rose 70%
    Read the case study
  • Nanda Arthritis and Rheumatology Center

    Situation
    There was no website, so a patient looking for a rheumatologist had no way to learn about the centre. Enquiries were few, and the ones that arrived came by word of mouth.
    What we did
    • A website for patients
    • Search work
    • Google Business and reviews
    • Lead capture and advertising
    Result
    No numbers were recorded for this engagement. The work is described in full in the case study.
    Read the case study

Also worked with

Curtain Label · Difesa Security Services · Felicity Inn · Hands On CSR · Implevista · Kambar Group · Kalessi · Kerur Pain Clinic · LL Trust · Lucky Deals · Natural Gases · NavaShakthi Souhardha · NewCom Logistics · Proton Technical Services · SB Engineering · Shakthi Foundation · Shakthi Group · Urbanest · Insyde Studio · Venkateshwara Laser Tech · Vivara Studios

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales audit. Find where deals are being lost and what to fix first.

  1. Step 1 · you are here

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we have to replace our hospital information system?
No. The audit treats it as the record for care and billing and decides only what may flow out of it and what must stay. A replacement is a different project, and the audit would recommend one only if the system cannot do what the hospital needs.
Will the audit tell us to buy more software?
It may recommend fewer tools as readily as more. Each tool is judged on observed use, and a missing job is named only when the enquiry trace shows it. Where an existing feature already does the job, the blueprint says to use that.
Do you need to see patient data?
No. The audit looks at how tools are set up and how enquiry records move, using masked samples and administrator views. Anything that exposes a patient's identity or clinical detail is excluded or masked, and your adviser's rules take priority over our scope.
Who owns the blueprint once it is delivered?
You do. The register, maps and blueprint are your documents. Having them in writing means a change of administrator, agency or vendor does not take the knowledge with it, and any later supplier can work from the same drawings.
What if the tools are connected by an agency we no longer use?
The audit records what the connection does, who holds the login and what would break if it stopped. Recovering access is the first recommendation. We do not repair the connection inside the audit, as repair is separate work.
Is this a technology purchase recommendation from a vendor?
No. GullySales takes no commission from any software supplier, and the blueprint names functions before products. If a product is named, the reason is written beside it and you choose, with your own procurement process applying.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.