Skip to content
GullySales

Industrial equipment manufacturers · Deal risk assessment

Read the file on every open machine quotation before you promise a delivery slot.

Deal risk assessment for an equipment manufacturer is a written check on each open quotation that shows what is missing before a purchase order can arrive. GullySales builds the checklist with your sales head, writes a note on each live deal, and records the next step the owner agrees on for the red ones.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A manager and salesperson review a proposal folder for missing approvals

What deal risk assessment means

Deal risk assessment is a short, written check on each open deal that shows what is missing before the order can arrive. GullySales builds the checklist with your sales head, writes a risk note on every live deal, and agrees what the owner does about each red one, without inventing a probability.

Last updated 14 Nov 2026.

For industrial equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “A quotation stays open because nobody asked”

    A large quotation for a line of machines sits in the sheet marked as expected. The plant engineer is happy, yet no one has met the person who signs the purchase order or asked whether the budget has been approved. The sheet shows the deal as live, and production capacity gets reserved for an order that may never come.

  • “The competitor is in the room and unnamed”

    The buyer mentions a visit from another maker, and the rep records it as small talk. Whether that maker has quoted a different specification or an imported machine decides how the negotiation goes, yet it never reaches the file, so the discount request arrives as a surprise.

  • “Specification and drawing are not agreed”

    A deal for a custom fabricated or modified machine moves to price discussion before the drawing is signed off by the plant. When the buyer later asks for a change in size or power, the quotation no longer matches, and the order stalls over a revision.

  • “Payment terms surface at the last meeting”

    Advance, milestone and credit terms are left until the buyer is ready to order. A procurement head who then asks for terms your owner will not accept restarts the negotiation, and the delay is blamed on paperwork when the real gap was a conversation nobody had earlier.

What we do

What we deliver for industrial equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Risk checklist for machine deals

    A short list of questions agreed with your sales head: decision-maker met, budget owner named, specification agreed, competitor known, site readiness, and payment terms discussed.

    Result: Every open deal is read against the same questions.

  2. Written risk note on each live quotation

    For each open quotation, a note setting out which answers are known, which are missing, and the evidence for each, written from the rep's file and a short conversation with the rep.

    Result: The owner can see why a deal is marked green or red.

  3. Named next step for each red deal

    For every deal with a gap, a specific action with an owner on your team, such as meeting the signatory, getting the drawing approved or raising terms.

    Result: No red deal is left without a person and an action.

  4. Capacity and slot caution list

    A list of deals where production capacity or a delivery slot is being held on the strength of a quotation with open risks, prepared for the owner's decision.

    Result: The owner knows which commitments rest on an unconfirmed order.

  5. Lost-deal reason record

    A plain record of why past quotations were lost or went quiet, grouped by reason, so that the next checklist reflects what actually happened to your deals.

    Result: The checklist is revised against real outcomes.

  6. Review routine for the sales head

    A routine and note format for the sales head to go through the risk notes with the reps, with the owner joining for the large quotations.

    Result: The review has a written agenda and leaves written decisions.

How the result is measured

  • Open deals with a named and met decision-maker
  • Red deals with an owner decision and a dated action
  • Deals where the specification is agreed in writing

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these industrial equipment manufacturers.

  • CNC machine and precision equipment manufacturers
  • Industrial pump and compressor manufacturers
  • Packaging machinery manufacturers
  • Conveyor and material handling equipment makers
  • Motor and drive manufacturers
  • Custom fabrication and job-work manufacturers
  • Export-oriented industrial equipment makers
  • Spare parts and after-sales service providers

Before you decide

Agree the work. Know how to judge it.

Deal risk assessment for industrial equipment manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

A list of open quotations with value
The assessment is only as good as the list. Provide the quotations as they stand, with values if known. Without values the deals are ranked by the sales head's judgement and the notes say so.
Three won and three lost orders to learn from
The checklist is built from real deals. Choose cases the sales head remembers well. If you cannot pick, we take the latest six from the register, which may not be the ones that teach the team more.
Sales engineers who will answer plainly
Each engineer must be willing to say what they do not know about a deal. Make clear that the exercise is not a hunt for fault. Where an engineer will not take part, the notes for that engineer's deals are marked incomplete.
The works capacity and slot position
A deal is risky if the works cannot deliver what the quotation implies. The production head should state which machines have a free slot and which are fully booked. Without that, delivery risk is left unrated.
Who may close a deal as lost
Someone must be allowed to close a quotation as lost, with a reason. Name that person. If nobody can, dead quotations stay in the book and the risk picture is blurred.

How it works

How the deal risk assessment work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List every open quotation with its owner

    We start with a plain list of the quotations that are open today, with the machine, the buyer, the sales engineer who owns it and the date it was sent. You and the sales head strike out the ones that are really dead. This list is what the checklist will be run against, so it must reflect the true state of the book. We also note quotations sent to the same plant by a dealer and by your own team, since two offers for one need are counted once and flagged as a risk of conflict.

  2. 2

    Build the checklist from past deals

    We look at three orders won and three lost and ask what was settled before the purchase order came, or was missing when it did not. Specification agreed, drawing signed, payment term discussed, second decider met, competitor known. The sales head chooses the questions that stay on a short checklist, ordered so that the ones a buyer cannot dodge, such as who signs and what budget is set, come first. Questions that no one could answer in any of the six cases are dropped.

  3. 3

    Go through each deal with its engineer

    We sit with each sales engineer and put the checklist to every open quotation, one at a time. Where the engineer does not know an answer, we write that down as unknown. An unknown on the competitor or the payment term is a finding in itself.

  4. 4

    Write a short risk note on every quotation

    For each deal we write a note of a few lines: what is settled, what is missing, and what the engineer plans to do about it. The sales engineer reads and corrects it. Deals are marked green, amber or red by the checklist answers, not by anyone's hope.

  5. 5

    Agree the next step for each red deal

    The owner and the sales head look at the red deals together and decide one next step for each: a call to the signatory, a site visit, a revised specification, or a decision to close. Each step has a name against it. Capacity and slot limits at the works are checked before any date is offered. The production head confirms which machines have a place in the schedule, so the sales engineer does not promise a delivery that the works cannot meet.

  6. 6

    Run the checklist again on the same deals

    After the next round of calls and visits, we repeat the checklist on the same deals and see which moved and why. We read the reasons given for deals now lost and add them to the record. The sales head decides which questions to add to or remove from the checklist.

Proof

Published examples of our work.

Real clients and the work recorded for each engagement. These examples may cover related services or industries. They show the method, not a guaranteed result.

All case studies
  • Burhani Hydroline

    Situation
    The website was dated. Menus were hard to follow, pages were slow, and it did not work properly on a phone, which is where a buyer looks first.
    What we did
    • Research before design
    • Wireframes and prototypes
    • The full product catalogue
    • An online checkout
    Result
    No numbers were recorded for this engagement. The work is described in full in the case study.
    Read the case study

Also worked with

Chord Road Hospital · Curtain Label · Difesa Security Services · Felicity Inn · Hands On CSR · Implevista · Kambar Group · Kalessi · Kerur Pain Clinic · LL Trust · Lucky Deals · Natural Gases · NavaShakthi Souhardha · NewCom Logistics · Proton Technical Services · SB Engineering · Shakthi Foundation · Shakthi Group · Urbanest · Insyde Studio · Venkateshwara Laser Tech · Vivara Studios

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Will this give us the chance of winning each order?
No. We do not invent probabilities. The note records what is known and what is missing, and the owner judges. A deal with every question answered is still not a promise that the buyer orders.
Is this the same as forecasting?
No. A forecast turns the pipeline into an expected order value. A risk note tells you which individual quotations need attention and what to do about each. The two can sit side by side, and this one takes less setup.
Do reps see this as being policed?
It lands better when the checklist is built with the reps and used to bring in help, such as an introduction to the signatory from the owner. We write the notes from the rep's own file and keep the tone factual.
Can this tell us the chance of winning a given order?
No. The checklist shows what is settled and what is missing on a deal; it does not give a percentage chance and we do not claim one. A deal with every box ticked can still be lost to a rival's price, and a deal with gaps can be won. The value is in finding the missing step while there is still time to take it, such as a second decider nobody has met or a drawing that was never signed.
How do we stop engineers feeling that the sales head is policing them?
Run the first pass alongside the engineer, not behind their back, and let them write their own plan for each red deal. The checklist is the same for everyone and is applied to the sales head's own deals too. We also keep the reason record free of blame: it states what happened to the order, and not who failed.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.