Skip to content
GullySales

Industrial equipment manufacturers · Lead leakage analysis

Find which machine enquiries never reached anyone who could quote.

For an industrial equipment manufacturer, lead leakage analysis traces every RFQ, spec call and dealer referral from the moment it arrives to the quotation or the order, and separates a lost sale from an enquiry nobody picked up. GullySales maps the routes your enquiries arrive by, adds counting where none exists, tests each handoff, and reports what the records prove.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of industrial equipment manufacturers at work in India

What lead leakage analysis means

Lead leakage analysis measures where enquiries go missing between arriving and becoming an order, separating missed handoffs from genuine buying decisions. GullySales maps your enquiry routes, puts counting in place where records are missing, tests the handoffs, and measures live enquiries over an agreed period before delivering an evidence-backed list of fixes.

Last updated 14 Nov 2026.

For industrial equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “The shared inbox that nobody owns”

    A plant engineer submits an RFQ through the website form, and it lands in a general mailbox read by three people. Each assumes another has replied. The buyer, meanwhile, has sent the same specification to four makers and moves ahead with whoever answers with a complete offer. Leakage here is not a lost negotiation. It is an enquiry that was never owned. The analysis checks who actually receives each route and whether a named person is responsible for the first reply.

  • “Trade fair cards and stall conversations”

    An exhibition produces a stack of visiting cards and a notebook of half-remembered requirements, and the stack is divided between the stall staff and the owner. Some cards are typed into a sheet, some stay in a bag. Counting what the fair produced against what reached a quotation shows how many contacts disappeared between the stall and the office. That figure is a gap in handling, which your own team can close, and it is separate from buyers who simply were not ready.

  • “Technical questions answered on a personal phone”

    A buyer rings the works engineer directly to ask whether a pump will run a given duty. The engineer answers well, promises a datasheet, and the conversation never enters any record. Weeks later the buyer has ordered elsewhere and nobody can say a call took place. Technical enquiries that stay inside one person's phone are the hardest to count. The analysis asks engineers where such calls go and sets up a simple way to log them without slowing the work.

  • “Dealer referrals and spares calls that fall between desks”

    A dealer passes on a plant's requirement, a maintenance team asks for a spare part, an annual maintenance contract comes due. Each reaches a different person, and none is counted as an enquiry because it does not arrive through the website. These are some of the warmest contacts a manufacturer receives. Following them through the same stages as a fresh RFQ shows whether they get a reply, a quotation and a recorded outcome, or whether they vanish into the routine of dispatch.

What we do

What we deliver for industrial equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Register of every route an RFQ can arrive by

    A written list of website forms, advertised phone numbers, marketplace seller panels, dealer emails, WhatsApp numbers, exhibition lead sheets and the works reception book. Your team checks the list against the contact details printed on the brochure, the datasheet and the website today.

    Result: Every contact detail shown to a buyer appears in the register with a named receiver.

  2. Stage definitions your sales and works teams agree

    A plain definition of an enquiry, a technical clarification, a quotation sent, a revised quotation and a confirmed order. Machine sales have more steps than a shop sale, so each is named in the words your people already use before any totals are compared.

    Result: Two people counting the same week of RFQs reach the same total.

  3. Test enquiries sent through each route

    Marked test RFQs and calls sent through the agreed routes, with arrival time and receiver recorded. Each handoff that fails has a trace your team can open, such as a form that reaches a retired address or a number that rings an unattended desk.

    Result: Each route shows a recorded arrival, or a recorded failure with its cause.

  4. Counting added where no record exists

    A call log for the sales line, a tag on marketplace enquiries, a logged form submission, or a shared sheet for exhibition contacts. The counting is kept light so the sales engineers actually use it, and it is tested before live measurement begins.

    Result: A test enquiry on each route appears in the receiving record.

  5. Source totals set against your own records

    The count each platform or panel reports, placed beside the count in your CRM or sheet for the same dates. Differences are sorted into explained ones, such as duplicates and spam, and enquiries that cannot be accounted for.

    Result: Every difference between a source total and your records carries a stated reason or an open question.

  6. Findings report with a ranked list of fixes

    Stage-by-stage counts, confirmed gaps, unresolved questions and a ranked action register. Any estimate of orders at risk states its assumptions plainly. Fixes that need your team and fixes that need separate work are listed apart.

    Result: Each finding points to the records it rests on, and each fix has an owner you chose.

How the result is measured

  • Enquiries received by source, separate from advertising clicks
  • Share of source enquiries present in the receiving record
  • Time to first human reply and contact-attempt coverage

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these industrial equipment manufacturers.

  • CNC machine and precision equipment manufacturers
  • Industrial pump and compressor manufacturers
  • Packaging machinery manufacturers
  • Conveyor and material handling equipment makers
  • Motor and drive manufacturers
  • Custom fabrication and job-work manufacturers
  • Export-oriented industrial equipment makers
  • Spare parts and after-sales service providers

Before you decide

Agree the work. Know how to judge it.

Lead leakage analysis for industrial equipment manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

Exports from every enquiry source
Bring whatever each route can export: the marketplace panel report, website form submissions, the CRM list, the exhibition sheet. The comparison needs the count a source reports beside the count your records show. A route with no export is described in the findings but cannot be measured.
Permission to send test RFQs
We submit marked enquiries and calls through your routes, and your team must know about them and agree. Test records need a label so they leave the quotation list afterwards. Without this permission, handoffs cannot be tested and the findings rest on old records alone.
Access to the people who answer
Sales engineers, the reception desk and the person who reads the shared inbox hold evidence that no export contains. They need time for short questions and a clear message that the work studies routes and not blame. Without their cooperation, calls on personal phones stay invisible.
Your current quotation register
Whether it is a sheet, a book or CRM records, the list of quotations sent and orders received shows which enquiries reached the end. Without it, the later stages cannot be counted, and the analysis can only report what happened at the front door.
A decision on what counts as an enquiry
A casual call about price, a spares request and a full RFQ with drawings are different things. Say which you count and which you do not. Without a stated view, the totals from sales and marketing will not match and time goes on arguing definitions.

How it works

How the lead leakage analysis work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Agree the routes and the records

    We start from your requirements brief and a conversation with the owner and the sales head. Together we list the ways an RFQ can reach the works, then agree which records are available. The written scope names the routes, the access your team will grant and the responsibilities on each side. A route nobody can show records for is marked as unmeasured, so it does not disappear inside a total.

  2. 2

    Record the position before any change

    Before we touch a process, we record what exists: enquiries by source, who replied, how long the first reply took where a log shows it, how many reached a quotation and how many became orders. Gaps are written down as gaps. This baseline is what every later finding is read against, so it is approved by your sales head before the work moves on.

  3. 3

    Send test enquiries through each entry point

    With your team's knowledge, we submit marked RFQs and make marked calls through the agreed routes, including the marketplace panel and the dealer address. Your nominated contact confirms where each arrived. A form that reaches a mailbox nobody reads, or a number forwarded to a switched-off phone, is found here at no cost to a real buyer.

  4. 4

    Add counting at the missing stages

    Where the works has no record of a stage, such as phone enquiries to the sales engineers or cards collected at an exhibition, we put in a simple tally. A logged submission, a call sheet or a tag in the CRM is enough. Your nominated contact checks the setup against the test enquiries before real ones are measured, so staff are not asked to use a tool that does not work.

  5. 5

    Follow live enquiries to their outcome

    Real RFQs are followed through the stages over the period set in the written scope. We compare source totals with your records, read available call logs and message threads for reply evidence, and mark each enquiry as received and owned, received and unowned, or not received. Disputed cases are discussed with the sales head against the conversation records, not memory.

  6. 6

    Read the result against the baseline

    The owner and sales head receive the findings and the ranked action register, set beside the position recorded at the start. They decide which changes the sales team makes and which need a separate scope. We separate a buyer who declined a quotation from an enquiry that was never answered, because the two call for different action.

Proof

Published examples of our work.

Real clients and the work recorded for each engagement. These examples may cover related services or industries. They show the method, not a guaranteed result.

All case studies
  • Burhani Hydroline

    Situation
    The website was dated. Menus were hard to follow, pages were slow, and it did not work properly on a phone, which is where a buyer looks first.
    What we did
    • Research before design
    • Wireframes and prototypes
    • The full product catalogue
    • An online checkout
    Result
    No numbers were recorded for this engagement. The work is described in full in the case study.
    Read the case study

Also worked with

Chord Road Hospital · Curtain Label · Difesa Security Services · Felicity Inn · Hands On CSR · Implevista · Kambar Group · Kalessi · Kerur Pain Clinic · LL Trust · Lucky Deals · Natural Gases · NavaShakthi Souhardha · NewCom Logistics · Proton Technical Services · SB Engineering · Shakthi Foundation · Shakthi Group · Urbanest · Insyde Studio · Venkateshwara Laser Tech · Vivara Studios

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales audit. Find where deals are being lost and what to fix first.

  1. Step 1 · you are here

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How is a leaked enquiry different from a lost sale?
A lost sale is a buyer who received an offer and chose another maker. A leaked enquiry is one that nobody received, owned or answered. The first calls for a look at price, delivery and technical fit. The second calls for a repair to a route or a handoff. The analysis keeps the two apart so you do not discount a machine to fix an inbox.
Can you do this if our enquiries are mostly by phone and WhatsApp?
Yes, but the first step is making those contacts countable. We set up a light call log or tag, test it, and measure live enquiries afterwards. Where no history exists, the findings say so and cover only the period measured. We do not rebuild missing records as if they were facts.
Will the sales engineers feel they are being watched?
It helps to say at the start that the work studies routes and handoffs, not individuals. We ask engineers where technical calls go and what would make logging easy. Reply evidence is read from logs and threads your team agrees to share. Findings name the point in the route where a gap sits, and your owner decides what follows.
Do dealers and distributors get included?
They can be, if you agree. Dealer referrals are some of the warmest enquiries a manufacturer receives, and they arrive by email or phone to one person. We trace how they are passed to you, who acknowledges them and whether they reach a quotation. We do not contact dealers without your approval.
Does the analysis tell us how much revenue we are losing?
It tells you how many enquiries cannot be accounted for and where. Any estimate of orders at risk states its assumptions, and it is never presented as revenue that can be recovered. Machine sales are long and uneven, so the sample you measure may be small, and we say so in the report.
Who makes the fixes once the report arrives?
Your team decides which changes to make, and the register shows who would own each. Routing a form to a named mailbox or starting a call log is work for your own people. A wider CRM build, new integrations or training on follow-up is separate work with its own written scope.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.